Teledyne Hastings 100 mT Dig Vac Controller, 2 Relays, 8'' Cable , DV-5-Thermocouple-Series, DV 5 Thermocouple Series, PN DCVT-5-X-Z
These Teledyne Hastings 100 mT Dig Vac Controller, 2 Relays, 8'' Cable have part number DCVT-5-X-Z, are new, and come with full Teledyne Hastings warranty. The Teledyne Hastings Instruments’ DAVC (Digital AVC) is a microprocessor-based vacuum gauge. In addition to the linear analog outputs (0-1 VDC, 0-5 VDC, 0-10 VDC, 4-20 mA, or 0-20 mA), pressure measurements can be accessed via the RS232 digital output. Digital readings can be provided in either Torr, mbar, or Pascal units. A precision A/D converter, along with the microprocessor, measures the thermocouple vacuum gauge tube’s output and converts the measurement to a pressure reading employing the gauge tube’s well-defined output/pressure function. The DAVC is a continuous-reading instrument for vacuum measurement and process control applications. The instrument is packaged in a small aluminum case with controls and electrical “D” connector located on the top. The DCVT feature a precision A/D converter along with a microprocessor to measure the thermocouple vacuum gauge tube’s signal output. The microprocessor converts the measurement to a pressure reading by employing the gauge tube’s well-defined output/pressure relationship. The result is displayed using a bright 3-digit green LED display. Both the DVT and DCVT are packaged in an 1/8 DIN case which can be panel mounted. The Digital VT/CVT Vacuum Gauge Meters are available for three of THI’s most popular gauge tube families: DV-4, DV-5 and DV-6. These tubes utilize THI’s rugged but sensitive noble metal thermocouples that are designed specifically for each range. Tubes are matched and interchangeable without calibration adjustments. They are compensated for temperature and rate of temperature change and are corrosion resistant. The DCVT includes several enhanced features which makes it an attractive solution for many vacuum control automation applications. The DCVT can provide linear analog output (voltage or current) for integration of vacuum measurement with a PLC or other data acquisition system. In addition, the DCVT provides RS232 communication for direct connection of the instrument to a computer. The DCVT also includes two independent user selectable set point relays for process control. The control relays are durable 10 AMP single pole double throw which can be wired in a normally open or normally closed configuration.
More information about these Teledyne Hastings 100 mT Dig Vac Controller, 2 Relays, 8'' Cable can be found by downloading the pdf catalog and documents below. Simply open the pdf catalog below, run the pdf search (ctrl F) and search for the DCVT-5-X-Z.
|