Ideal Vacuum Cube 6 x 12 TVAC Thermal Vacuum Chamber Heater Plate for up to 140 Degrees C

This Ideal Vacuum Cube 6 x 12 inch heater plate will safely provide up to 140°C of uniformly distributed heat to the vacuum side of the plate surface, through a 120VAC 360W heating element. This thermal vacuum plate expands the capabilities of the Ideal Vacuum Cube whereby the Cube can be used as a Thermal Vacuum Chamber (TVAC). Applications include thermal stability testing, surface coating and implantation, and damage testing under thermal load. Thermal Vacuum Chambers are often used to replicate or simulate the extreme conditions of outer space and are frequently employed in the testing of spacecraft and aerospace parts or components under a simulated space environment, and control outgassing for a giving process. Please note that the maximum allowable temperature using Viton O-rings is 150°C.

This heater plate has an integrated Type-K thermocouple, and works directly with our single zone PID Plug & Play Heater Control System, which is designed to accurately measure and control the temperature of our Cube heater plates. When a single Cube heater plate is used, and once the system has reached thermal equilibrium, the rest of the chamber will be approximately 10°C less than the heated plate itself. Multiple heater plates may be used (up to the heater control system's maximum power load) to help eliminate this temperature differential.

These Vacuum Cube heater plates are machined from 6061-T6 aluminum and powder coated red. The vacuum chamber side (back) of these heater plates have an optical breadboard for fixtures and test components. Temperature gradients due to conductive losses through the heater plate edges are kept to a minimum with integrated, machined stand-offs that minimize the contact surface between the plate and the Vacuum Cube frame. An aluminum anodized shield on the air side of the heater plate helps control convective losses due to ambient conditions (and helps protect users from direct contact with the heated plate).

As the plots below demonstrate, ramp-up time and maximum plate temperature is dependent upon the heater control system, number of heater plates, ambient operating conditions, and whether the vacuum cube is insulated.

Features:

• 6 x 12 plate
• 6061-T6 aluminum
• Red powdercoat
• Heats to 140°C, 120VAC, 360W
• Anodized shield helps control convective losses and protect users from direct heater contact
• Internal optical breadboard
• Mounts in any orientation
• Works with PID heater control system P107361

Directly mounts to frame size:

• 6x6x12
• 6x12x12
• 6x6x12 hexagon
• 6x6x12 octagon

This plate can also be mounted on any 12 x 12 x 12, or 24 x 24 x 24 frame with a plate adapter kit.