Glass FLANGED Sample-Seal U-Tube Liquid Sample Holder 5 ml Capacity, 5/8 in. OD, (2) High Vacuum Valves, 6.35mm Glass, With #15 glass flange joints. WITH Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

Glass FLANGED Sample-Seal U-Tube Liquid Sample Holder 5 ml Capacity, 5/8 in. OD, (2) High Vacuum Valves, 6.35mm Glass, With #15 glass flange joints. NO Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

Glass FLANGED Sample-Seal U-Tube Liquid Sample Holder 25 ml Capacity, 5/8 in. OD, (2) High Vacuum Valves, 6.35mm Glass, With #15 glass flange joints. WITH Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

Glass FLANGED Sample-Seal U-Tube Liquid Sample Holder 25 ml Capacity, 5/8 in. OD, (2) High Vacuum Valves, 6.35mm Glass, With #15 glass flange joints. NO Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

Glass FLANGED Sample-Seal U-Tube Liquid Sample Holder 50 ml Capacity, 5/8 in. OD, (2) High Vacuum Valves, 6.35mm Glass, With #15 glass flange joints. WITH Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

Glass FLANGED Sample-Seal U-Tube Liquid Sample Holder 50 ml Capacity, 5/8 in. OD, (2) High Vacuum Valves, 6.35mm Glass, With #15 glass flange joints. NO Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

Glass FLANGED Sample-Seal U-Tube Liquid Sample Holder 100 ml Capacity, 5/8 in. OD, (2) High Vacuum Valves, 6.35mm Glass, With #15 glass flange joints. WITH Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

Glass FLANGED Sample-Seal U-Tube Liquid Sample Holder 100 ml Capacity, 5/8 in. OD, (2) High Vacuum Valves, 6.35mm Glass, With #15 glass flange joints. NO Viton O-Ring Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal with O-Ring and Pinch Clamp. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of #15 O-ring joint flange glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long being 2 inches wide (outside edge of glass u-shape) with #15 O-ring joint glass flange connections. For connections at the #15 glass joint flange they require a #15 O-Ring and pinch clamp size of No. 28 sold on this website. Replacement o-rings and pinch clamps are sold separately, please call 505-872-0037 for more information.

Sample-Seal 6.35 mm Glass U-Tube Liquid Sample Holder, 5 ml, 5/8 in. OD, Adjustable 0-4 mm HV Valves, Teflon Tip NO O-Ring. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal 6.35 mm Glass U-Tube Liquid Sample Holder, 5 ml, 5/8 in. OD, Adjustable 0-4 mm HV Valves, WITH O-Ring on Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal 6.35 mm Glass U-Tube Liquid Sample Holder 25 ml Capacity, 5/8 in. OD, Adjustable 0-4 mm HV Valves, Teflon Tip NO O-Ring. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal 6.35 mm Glass U-Tube Liquid Sample Holder, 25 ml, 5/8 in. OD, Adjustable 0-4 mm HV Valves, WITH O-Ring on Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal 6.35 mm Glass U-Tube Liquid Sample Holder 50 ml Capacity, 5/8 in. OD, Adjustable 0-4 mm HV Valves, Teflon Tip NO O-Ring. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal 6.35 mm Glass U-Tube Liquid Sample Holder, 50 ml, 5/8 in. OD, Adjustable 0-4 mm HV Valves, WITH O-Ring on Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal 6.35 mm Glass U-Tube Liquid Sample Holder 100 ml Capacity, 5/8 in. OD, Adjustable 0-4 mm HV Valves, Teflon Tip NO O-Ring. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal Glass Liquid Sample Holder 50 ml, Graduated, 90 Degree, 0-4mm CG Valve, #9 Joint Flange These graduated Sample-Seal liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These liquid sample holders include 1, 0 to 4 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with one 90 degree #9 O-ring joint outer diameter glass connections. These sample-seal liquid holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to contain the precursor liquid samples before the spectrometer. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal 6.35 mm Glass U-Tube Liquid Sample Holder, 100 ml, 5/8 in. OD, Adjustable 0-4 mm HV Valves, WITH O-Ring on Tip. These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These U-tube liquid sample holders include two 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight o-ring seal. They are designed with 0.625 inch OD on the glass straight sections before the U-shape and include inlet and exhaust ports of ¼ inch outer diameter glass connections. These U tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. They are about 10 inch long, 2 inches wide (outside edge of glass u-shape), with 1/4 OD glass connection and are often connected to flexible Swagelok tubing by Ultra-Torr compression vacuum fittings. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal Glass Liquid Sample Holder 50 ml, 90 Degree, 0-4mm CG Valve, #9 Joint Flange These Sample-Seal liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These liquid sample holders include 1, 0 to 4 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with one 90 degree #9 O-ring joint outer diameter glass connections. These sample-seal liquid holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to contain the precursor liquid samples before the spectrometer. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal Glass Liquid Sample Holder 50 ml, 90 Degree, 0-4mm CG Valve, #9 Joint Flange These Sample-Seal liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These liquid sample holders include 1, 0 to 4 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with one, inline #9 O-ring joint outer diameter glass connections. These sample-seal liquid holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to contain the precursor liquid samples before the spectrometer. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal Glass Liquid Sample Holder 50 ml, 90 Degree, 0-8mm CG Valve, #9 Joint Flange These Sample-Seal liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. These liquid sample holders include 1, 0 to 8 mm adjustable high-vacuum CG valve which produces a leak-tight O-ring seal. They are designed with one, inline #9 O-ring joint outer diameter glass connections. These sample-seal liquid holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to contain the precursor liquid samples before the spectrometer. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Replacement High Vacuum Valve, (1 each) 0-4 mm Tip and Viton O-rings for Sample-Seal U-Tube Liquid Sample Holder, with Teflon Tip Designed for Sample-Seal Storage U-Tubes with 5/8 in. OD tubing, valve has 2 Viton Stem O-Rings, NO O-Ring on tip. These are the replacement high-vacuum valve assembly designed for our Ideal Vacuum Sample-Seal U-tube shaped storage containers which are built from 5/8 inch OD glass tube. These replacement high-vacuum valves include the 2 Viton O-ring seals (additional replacement seals are also sold separately). These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. Our U-tube liquid sample holders require two each of these 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight O-ring seal. These U-tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. Please call 505-872-0037 for more information.

Replacement High Vacuum Valve, (1 each) 0-4 mm Tip and Viton O-rings for Sample-Seal U-Tube Liquid Sample Holder Designed for Sample-Seal Storage U-Tubes with 5/8 in. OD tubing, valve has 3 Viton O-Rings, (2) Stem, (1) Tip These are the replacement high-vacuum valve assembly designed for our Ideal Vacuum Sample-Seal U-tube shaped storage containers which are built from 5/8 inch OD glass tube. These replacement high-vacuum valves include the 3 Viton O-ring seals (additional replacement seals are also sold separately). These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. Our U-tube liquid sample holders require two each of these 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight O-ring seal. These U-tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. Please call 505-872-0037 for more information.

Replacement O-rings Kit for High Vacuum Valve with 2 Stem O-Rings, NO Tip O-Ring, Sample-Seal U-Tube Liquid Sample Holder, 2 Viton 0-Rings Designed For High Vacuum Valves In Our U-Tubes With 5/8 Inch OD Glass Tube These are the replacement O-ring kits for our high-vacuum valve assembly are designed for our Ideal Vacuum Sample-Seal U-tube shaped storage containers which are built from 5/8 inch OD glass tube. These replacement high-vacuum valves O-ring kits include 2 Viton O-ring seals. (additional replacement high vacuum valve assemblies are also sold separately). These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. Our U-tube liquid sample holders require two each of these 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight O-ring seal. These U-tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. Please call 505-872-0037 for more information.

Replacement O-rings Kit for High Vacuum Valve with 3 O-Rings, (2) stem (1) tip, Sample-Seal U-Tube Liquid Sample Holder, Viton 0-Rings Designed For High Vacuum Valves In Our U-Tubes With 5/8 Inch OD Glass Tube These are the replacement O-ring kits for our high-vacuum valve assembly are designed for our Ideal Vacuum Sample-Seal U-tube shaped storage containers which are built from 5/8 inch OD glass tube. These replacement high-vacuum valves O-ring kits include the 3 Viton O-ring seals (2) stem (1) tip. (additional replacement high vacuum valve assemblies are also sold separately). These Sample-Seal U-tube liquid sample holders are used to store precursors that generate vapors to be flowed into the vacuum chamber. Our U-tube liquid sample holders require two each of these 0 to 4 mm adjustable high-vacuum valves which produce a leak-tight O-ring seal. These U-tube liquid sample holders are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiment to contain the precursor liquid samples before the spectrometer. Please call 505-872-0037 for more information.

#15 Viton O-ring for 15 mm ID Glass Vessels O-ring Joint #116 O-Ring. These Viton O-rings are used in our Ideal Vacuum Glass Vessel Manifolds, U-Tubes and Glass Elbows, with 15mm ID, also requires No. 28 pinch clamp for vacuum seal. They are made of Viton® which is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton is a registered trademark of DuPont Performance Elastomers. O-Ring, Viton for Ideal Vacuum Glass Manifold, U-Tube, Glass Elbow. Dimensions (inch): 0.75 x 0.938 x 0.094

#25 Viton O-ring for 25 mm ID Glass Vessels O-ring Joint #217 O-Ring These Viton O-rings are used in our Ideal Vacuum Glass Vessel Manifolds with 25 mm ID, also requires No. 35 pinch clamp for vacuum seal. See RED Circled Graphic Above For Location. They are made of Viton which is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton is a registered trademark of DuPont Performance Elastomers. O-Ring, Viton for Ideal Vacuum Glass Manifold.Dimensions(inch): 217 1.171 x .139

Sample-Seal Glass Adapter, Inline, 0-4mm CG Valve, #9 Joint Flange These glass, inline adapters are designed to work with our Sample Seal- liquid sample holders. These adapters have 1, 0 to 4 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with 2, inline #9 O-ring joint outer diameter glass connections. These adapters are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to control the flow of a precursor liquid sample. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal Glass Adapter, Inline, 0-8mm CG Valve, #9 Joint Flange These glass, inline adapters are designed to work with our Sample Seal- liquid sample holders. These adapters have 1, 0 to 8 mm adjustable high-vacuum CG valve which produces a leak-tight o-ring seal. They are designed with 2, inline #9 O-ring joint outer diameter glass connections. These adapters are designed to withstand pressurizing up to 50 PSI and are often used in molecular spectroscopy experiments to control the flow of a precursor liquid sample. For connections at the #9 glass joint flange they require a #9 O-Ring and pinch clamp size of No. 18 and require a #112 O-ring. Replacement o-rings are sold separately, please call 505-872-0037 for more information.

Sample-Seal Glass Connecting Adapter, Female 24/40 Ground Glass Joint to #9 O-Ring Joint Flange These glass straight adapters are designed to work with our Sample-Seal liquid sample holders. This adapter has #9 O-ring joint flange and a female 24/40 ground glass joint. Connections at the #9 glass joint flange require a #9 O-ring and No. 18 pinch clamp. Replacement o-rings are sold separately. Please call 505-872-0037 for more information.

Sample-Seal Glass Connecting Adapter, Male 24/40 Ground Glass Joint to #9 O-Ring Joint Flange These glass straight adapters are designed to work with our Sample-Seal liquid sample holders. This adapter has #9 O-ring joint flange and a male 24/40 ground glass joint. Connections at the #9 glass joint flange require a #9 O-ring and No. 18 pinch clamp. Replacement o-rings are sold separately. Please call 505-872-0037 for more information.

NVacuo T Adapter With (3) 15 mm O-ring Joints. NVacuo #15 Oring Joint Tee designed with dimensions compatible with all other NVacuo Products to aid with easy assembly and configurable options. These make it easy to mount and dismount flanged U-tubes from NVacuo manifolds and provide countless different setup options. This stands 4 Inches tall and uses (3) 15 mm O-Rings and No. 28 Pinch Clamp for Vacuum Seal. Please call 505-872-0037 for more information.

NVacuo Elbow With (2) 15 mm O-ring Joints. NVacuo #15 Oring Elbow designed with dimensions compatible with all other NVacuo Products to aid with easy assembly and configurable options. These make it easy to mount and dismount flanged U-tubes from NVacuo manifolds and provide countless different setup options. This stands 4 Inches tall and is uses 2 Inches from the center of each flange to the face of the adjacent flange. Requires 15 15 mm ID O-Rings and No. 28 Pinch Clamp for Vacuum Seal. Please call 505-872-0037 for more information.

NVacuo Glass Vacuum Manifold with 4 Ports, #15 and # 25 O-ring Joints, Includes (4) 0-4 mm High Vacuum Valves with O-Ring on Tip. These NVacuo manifold systems provide the best solution for gas distillation and dynamic setup environments. Easily configurable with all other NVacuo products, this manifold has 8 Inch spacing between each of its four bottom #15 O-ring joint flanges. Each is also equipped with 0-4 mm High Vacuum Valves with O-ring on tip making it easy and simple to attach U-tubes for holding samples with the standard NVacuo Tees and Elbows built with the easy to use Universal O-ring joint flange design. This design means no hassling with glass end tubes and compression fitting adapters for every glass connection. The manifold is also designed with two top #15 O-ring joint flanges for mounting pressure gauges, as well as two main #25 O-ring joint flanges at each end of the manifold for pumping down the system and releasing gas samples for percent concentration measurements. The #15 joint flange requires #116 O-ring and No. 28 pinch clamp. The #25 joint flange requires #214 or #217 O-ring and No. 35 pinch clamp. Replacement O-rings and pinch clamps are sold separately on this website, please call 505-872-0037 for more information.

#28 O-Ring Joint Pinch Clamp for Sample-Seal Glass U-Tube Liquid Sample Holders, for 12 or 15 mm inner dia. O-Ring Joints. Stainless Steel. These #28 O-ring joint pinch clamps are used with our Ideal Vacuum Glass Manifold, U-tubes and attachments. They have a screw type locking device and are used for 12 or 15 mm inner diameter O-ring joints or 28 mm spherical ball joints. They are an easy way way to attach and detach multiple sections of glass, O-ring joints, or spherical ball joints. Requires a #116 O-ring for seal. Made of stainless steel. #28 O-ring joint clamp

Viton O-Ring for Glass Vacuum Vessels, #9 O-Ring Joint. 112, Pack of 12. These Viton O-Ring are used with our Ideal Vacuum glass manifolds, U-tubes, and attachments with #9 glass O-ring joints. A No. 18 pinch clamp is also required for each joint. Viton is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton is a registered trademark of DuPont Performance Elastomers.

#35 O-Ring Joint Pinch Clamp for Sample-Seal Glass U-Tube Liquid Sample Holders, for 20 or 25 mm inner dia. O-Ring Joints. SS. These #35 O-Ring Joint Pinch clamps are used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They have a screw type locking device and are used for 20 or 25 mm inner diameter O-Ring Joints or 35 mm spherical ball joints. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints. Requires #217or #214 O-Ring for seal. Made of Stainless Steel. #35 O-ring Joint Clamp

NW KF-16 to 9mm ID Glass O-Ring Joint Adapter, Stainless Steel, uses No. 18 Joint Clamp SS These NW KF-16 to 9mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #9 O-Rings and #18 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

NW KF-16 to 15mm ID Glass O-Ring Joint Adapter, Stainless Steel, uses No. 28 Joint Clamp SS These KF-16 to 15 mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #15 O-Rings and #28 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

NW KF-25 to 9mm ID Glass O-Ring Joint Adapter, Stainless Steel, uses No. 18 Joint Clamp SS These KF-25 to 9 mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #9 O-Rings and #18 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

NW KF-25 to 15mm ID Glass O-Ring Joint Adapter, Stainless Steel, uses No. 28 Joint Clamp SS These KF-25 to 15 mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #15 O-Rings and #28 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

NW KF-25 to 25mm ID O-Ring Joint Adapter, Stainless Steel, uses No. 35 Joint Clamp SS These KF-25 to 25 mm O-Ring adaptors can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #25 O-Rings and #35 O-Ring joint pinch clamps. They allow attaching of vacuum systems directly to O-Ring Joints (glass and stainless steel) or Spherical Ball Joints. Made of Stainless Steel.

15 mm ID nipple, uses #116 O-Ring and #28 Joint Clamp, 4 in. long. Stainless Steel These 15mm Nipples can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #116 O-Rings and #28 O-Ring joint pinch clamps. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints. Made of Stainless Steel.

15 mm ID nipple, uses #116 O-Ring and #28 Joint Clamp, 8 in. long, Stainless Steel These 15mm Nipples can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #116 O-Rings and #28 O-Ring joint pinch clamps. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints. Made of Stainless Steel.

#15, 15 mm Stainless Steel Flexible O-Ring Bellows Joint for seal uses #116 O-Ring and #28 Joint Clamp. These 15mm Flexible O-Ring Bellows Joints can be used with our Ideal Vacuum Glass Manifold, U-tubes and Attachments. They use #116 O-Rings and #28 O-Ring joint pinch clamps. They are an easy way way to attach and detach multiple sections of glass O-Ring Joints or Spherical Ball Joints, and allow a small degree of flexibility. Made of Stainless Steel.