Ideal Vacuum AutoExplor Software Basic Version, Lifetime License, for all ExploraVAC TVAC Thermal Vacuum Test Chamber Systems. Ideal Vacuum’s AutoExplor™ software is a Windows® 10 and 11, touch screen enabled application that can control any Ideal Vacuum ExploraVAC TVAC thermal vacuum chamber instrument from a computer or laptop. AutoExplor software gives the operator the power to precisely control all test conditions and is able to confirm that test conditions are met. AutoExplor is a stand-alone application that does not require an internet connection. This listing is for the non-expiring purchase of one AutoExplor software basic version license and is keyed to an individual ExploraVAC TVAC system. Each ExploraVAC TVAC instrument requires a separate software license. The software may be installed on any number of Windows computers to remotely operate the specific instrument for which it is licensed. AutoExplor Basic Version Features Include: Manual device control Real-time graphing of system behavior Service and preventive maintenance schedule alerts System troubleshooting notifications Free minor software updates when available Upgrade to the premium version at any time AutoExplor software allows a user to manually control devices while protecting the system. AutoExplor properly sequences pumps and automatically operates the correct valves for a given request. The user can program pressure and temperature setpoints, ramp rates, soak times, and venting (if the system is equipped with those hardware options). The software provides real-time graphical data streaming so the user can visualize system behavior. AutoExplor maintains an internal preventive maintenance schedule and notifies the user when system service is due. For example, it notifies when scroll pump tip-seal replacements are needed and when sensor calibration is due. This helps keep the system at peak operating performance. It also provides fault and error messages along with specific troubleshooting information in the case of a device failure so that the issue can be corrected as soon as possible. AutoExplor Premium Version Added Features: Step-by-step complex recipe creation Automated recipe control Control setpoints and ramp rates of multiple devices simultaneously Data logging (3 types) Generate environmental TVAC test reports from log files AutoExplor IP Client for network clients AutoExplor API for integration into user software (i.e., LabView™) Free minor software updates when available Simple online annual renewal Premium version AutoExplor software includes all the features of the basic software package and adds automated recipe control, data logging, and log export capabilities. Complex test recipes can be created as a step-by-step process, where each step can control the on/off state, setpoints, and ramp rates of multiple devices. One or multiple end conditions for each recipe step may be set using logical operators. The premium version allows the user to quickly generate environmental TVAC test reports from recipe data log files. Logs can be reviewed to ensure targeted process parameters are achieved. The premium version also includes AutoExplor IP Client, which gives the software the ability to be used as a host that can manage multiple external network clients, and AutoExplor API (application programming interface), which allows a scientist or programmer to integrate an ExploraVac instrument into their existing software test suite without using AutoExplor’s software interface. The basic version of AutoExplor includes a 30 day trial of all the premium version features. Basic AutoExplor may be upgraded to the premium version at any time. ExploraVAC MAX systems, which have a built-in, touch screen user interface, and an on board computer, include a 1 year premium version AutoExplor license. Software updates when available, and unlock keys to upgrade to the full version can be downloaded directly from this website. * AutoExplor software warranty per user manual (download below). LabView is a trademark of National Instruments.

Ideal Vacuum AutoExplor Software Premium Version, Initial 1 Year License, for all ExploraVAC TVAC Thermal Vacuum Test Chamber Systems. Ideal Vacuum’s AutoExplor™ software is a Windows® 10 and 11, touch screen enabled application that can control any Ideal Vacuum ExploraVAC TVAC thermal vacuum chamber instrument from a computer or laptop. AutoExplor software gives the operator the power to precisely control all test conditions and is able to confirm that test conditions are met. AutoExplor is a stand-alone application that does not require an internet connection. This listing is for the initial purchase of a one-year activation license of the premium version of the AutoExplor software. This purchase is for users who do not already have the AutoExplor basic version license (If you already hold a basic version license and want to upgrade to the premium version, see part number P1012175). The software is keyed to an individual ExploraVAC TVAC system. Each ExploraVAC TVAC instrument requires a separate software license. The software may be installed on any number of Windows computers to remotely operate the specific instrument for which it is licensed. AutoExplor software is a stand-alone application that does not require an internet connection. AutoExplor Premium Version Features: Manual device control Real-time graphing of system behavior Service and preventive maintenance schedule alerts System troubleshooting notifications Step-by-step complex recipe creation Automated recipe control Control setpoints and ramp rates of multiple devices simultaneously Data logging (3 types) Generate environmental TVAC test reports from log files AutoExplor IP Client for network clients AutoExplor API for integration into user software (i.e., LabView™) Free minor software updates when available Simple online annual renewal AutoExplor premium version software must be renewed annually or it will revert to the (non-expiring) basic version (part number P1012102) with minimal activated features. Discounts for extended or non-expiring premium version licenses are available. Some purchasers may be eligible for other discounts. Please speak to your sales representative. Premium version AutoExplor software includes all the features of the basic software package and adds automated recipe control, data logging, and log export capabilities. Complex test recipes can be created as a step-by-step process, where each step can control the on/off state, setpoints, and ramp rates of multiple devices. One or multiple end conditions for each recipe step may be set using logical operators. The premium version allows the user to quickly generate environmental TVAC test reports from recipe data log files. Logs can be reviewed to ensure targeted process parameters are achieved. The premium version also includes AutoExplor IP Client, which gives the software the ability to be used as a host that can manage multiple external network clients, and AutoExplor API (application programming interface), which allows a scientist or programmer to integrate an ExploraVac instrument into their existing software test suite without using AutoExplor’s software interface. AutoExplor maintains an internal preventive maintenance schedule and notifies the user when system service is due. For example, it notifies when scroll pump tip-seal replacements are needed and when sensor calibration is due. This helps keep the system at peak operating performance. It also provides fault and error messages along with specific troubleshooting information in the case of a device failure so that the issue can be corrected as soon as possible. The basic version of AutoExplor includes a 30 day trial of all the premium version features. The basic software may be upgraded to the premium version at any time. Basic version AutoExplor software is included with all ExploraVAC MAX TVAC systems, which have a built-in, touch screen user interface, and an onboard computer. Software updates and unlock keys to the premium version are downloaded directly from this website. * AutoExplor software warranty per user manual (download below). LabView is a trademark of National Instruments.

Ideal Vacuum AutoExplor Software Premium Version, Annual Renewal License, for all ExploraVAC TVAC Thermal Vacuum Test Chamber Systems. Ideal Vacuum’s AutoExplor™ software is a Windows® 10 and 11, touch screen enabled application that can control any Ideal Vacuum ExploraVAC TVAC thermal vacuum chamber instrument from a computer or laptop. AutoExplor software gives the operator the power to precisely control all test conditions and is able to confirm that test conditions are met. AutoExplor is a stand-alone application that does not require an internet connection. This listing is for the purchase of the annual renewal of the premium version license of the AutoExplor software. This renewal may only be purchased by AutoExplor premium version license holders (part number P1012100). AutoExplor premium version software must be renewed annually or it will revert to the (non-expiring) basic version (part number P1012102) with minimal activated features. Discounts for extended or non-expiring premium version licenses are available. Some purchasers may be eligible for other discounts. Please speak to your sales representative. The software is keyed to an individual ExploraVAC TVAC system. Each ExploraVAC TVAC instrument requires a separate software license. The software may be installed on any number of Windows computers to remotely operate the specific instrument for which it is licensed. AutoExplor software is a stand-alone application that does not require an internet connection. AutoExplor Premium Version Features: Manual device control Real-time graphing of system behavior Service and preventive maintenance schedule alerts System troubleshooting notifications Step-by-step complex recipe creation Automated recipe control Control setpoints and ramp rates of multiple devices simultaneously Data logging (3 types) Generate environmental TVAC test reports from log files AutoExplor IP Client for network clients AutoExplor API for integration into user software (i.e., LabView™) Free minor software updates when available Simple online annual renewal Premium version AutoExplor software includes all the features of the basic software package and adds automated recipe control, data logging, and log export capabilities. Complex test recipes can be created as a step-by-step process, where each step can control the on/off state, setpoints, and ramp rates of multiple devices. One or multiple end conditions for each recipe step may be set using logical operators. The premium version allows the user to quickly generate environmental TVAC test reports from recipe data log files. Logs can be reviewed to ensure targeted process parameters are achieved. The premium version also includes AutoExplor IP Client, which gives the software the ability to be used as a host that can manage multiple external network clients, and AutoExplor API (application programming interface), which allows a scientist or programmer to integrate an ExploraVac instrument into their existing software test suite without using AutoExplor’s software interface. * AutoExplor software warranty per user manual (download below). LabView is a trademark of National Instruments.

Ideal Vacuum AutoExplor Software Upgrade, Basic to Premium Version, 1 Year License, for all ExploraVAC TVAC Thermal Vacuum Test Chamber Systems. Ideal Vacuum’s AutoExplor™ software is a Windows® 10 and 11, touch screen enabled application that can control any Ideal Vacuum ExploraVAC TVAC thermal vacuum chamber instrument from a computer or laptop. AutoExplor software gives the operator the power to precisely control all test conditions and is able to confirm that test conditions are met. AutoExplor is a stand-alone application that does not require an internet connection. This listing is for the purchase of a one-year activation license of the premium version of the AutoExplor software which upgrades the software from the basic to the premium version (If you do not already hold a basic version license, see part number P1012100). This license must be renewed annually or it will revert back to the (non-expiring) basic version (part number P1012102) with minimal activated features. Each ExploraVAC TVAC instrument requires a separate software license. The software may be installed on any number of Windows computers to remotely operate the specific instrument for which it is licensed. Discounts for extended or non-expiring full version licenses are available. Some purchasers may be eligible for other discounts. Please speak to your sales representative. AutoExplor Premium Version Features: Manual device control Real-time graphing of system behavior Service and preventive maintenance schedule alerts System troubleshooting notifications Step-by-step complex recipe creation Automated recipe control Control setpoints and ramp rates of multiple devices simultaneously Data logging (3 types) Generate environmental TVAC test reports from log files AutoExplor IP Client for network clients AutoExplor API for integration into user software (i.e., LabView™) Free minor software updates when available Simple online annual renewal Premium version AutoExplor software includes all the features of the basic software package and adds automated recipe control, data logging, and log export capabilities. Complex test recipes can be created as a step-by-step process, where each step can control the on/off state, setpoints, and ramp rates of multiple devices. One or multiple end conditions for each recipe step may be set using logical operators. The premium version allows the user to quickly generate environmental TVAC test reports from recipe data log files. Logs can be reviewed to ensure targeted process parameters are achieved. The premium version also includes AutoExplor IP Client, which gives the software the ability to be used as a host that can manage multiple external network clients, and AutoExplor API (application programming interface), which allows a scientist or programmer to integrate an ExploraVac instrument into their existing software test suite without using AutoExplor’s software interface. AutoExplor basic version software allows a user to manually control devices while protecting the system. AutoExplor properly sequences pumps and automatically operates the correct valves for a given request. The user can program pressure and temperature setpoints, ramp rates, soak times, and venting (if the system is equipped with those hardware options). The software provides real-time graphical data streaming so the user can visualize system behavior. AutoExplor software maintains an internal preventive maintenance schedule for the ExploraVAC TVAC hardware. It logs hours on each component and alerts the user when maintenance is due. It helps keep the instrument running at peak performance. For example, it notifies when scroll pump tip-seal replacements are needed and when pressure sensor calibration is due. It also provides detailed fault and error messages in the case of a device failure. The basic version of AutoExplor includes a 30 day trial of all the premium version features. Basic AutoExplor may be upgraded to the premium version at any time. ExploraVAC MAX systems, which have a built-in, touch screen user interface, and an on board computer, include a 1 year premium version AutoExplor license. Software updates when available, and unlock keys to upgrade to the full version can be downloaded directly from this website. * AutoExplor software warranty per user manual (download below). LabView is a trademark of National Instruments.

Ideal Vacuum AutoExplor Software Premium Version Lifetime License, for all ExploraVAC TVAC Thermal Vacuum Test Chamber Systems. Ideal Vacuum’s AutoExplor™ software is a Windows® 10 and 11, touch screen enabled application that can control any Ideal Vacuum ExploraVAC TVAC thermal vacuum chamber instrument from a computer or laptop. AutoExplor software gives the operator the power to precisely control all test conditions and is able to confirm that test conditions are met. AutoExplor is a stand-alone application that does not require an internet connection. This listing is for the non-expiring purchase of one AutoExplor software premium version license and is keyed to an individual ExploraVAC TVAC system. This AutoExplor lifetime license is for the original purchaser only and may not be transferred. Each ExploraVAC TVAC instrument requires a separate software license. The software may be installed on any number of Windows computers to remotely operate the specific instrument for which it is licensed. AutoExplor software allows a user to manually control devices while protecting the system. AutoExplor properly sequences pumps and automatically operates the correct valves for a given request. The user can program pressure and temperature setpoints, ramp rates, soak times, and venting (if the system is equipped with those hardware options). The software provides real-time graphical data streaming so the user can visualize system behavior. AutoExplor maintains an internal preventive maintenance schedule and notifies the user when system service is due. For example, it notifies when scroll pump tip-seal replacements are needed and when sensor calibration is due. This helps keep the system at peak operating performance. It also provides fault and error messages along with specific troubleshooting information in the case of a device failure so that the issue can be corrected as soon as possible. AutoExplor Premium Version Features: Manual device control Real-time graphing of system behavior Service and preventive maintenance schedule alerts System troubleshooting notifications Step-by-step complex recipe creation Automated recipe control Control setpoints and ramp rates of multiple devices simultaneously Data logging (3 types) Generate environmental TVAC test reports from log files AutoExplor IP Client for network clients AutoExplor API for integration into user software (i.e., LabView™) Free minor software updates when available Premium version AutoExplor software includes all the features of the basic software package and adds automated recipe control, data logging, and log export capabilities. Complex test recipes can be created as a step-by-step process, where each step can control the on/off state, setpoints, and ramp rates of multiple devices. One or multiple end conditions for each recipe step may be set using logical operators. The premium version allows the user to quickly generate environmental TVAC test reports from recipe data log files. Logs can be reviewed to ensure targeted process parameters are achieved. The premium version also includes AutoExplor IP Client, which gives the software the ability to be used as a host that can manage multiple external network clients, and AutoExplor API (application programming interface), which allows a scientist or programmer to integrate an ExploraVac instrument into their existing software test suite without using AutoExplor’s software interface. The basic version of AutoExplor includes a 30 day trial of all the premium version features. Basic AutoExplor may be upgraded to the premium version at any time. ExploraVAC MAX systems, which have a built-in, touch screen user interface, and an on board computer, include a 1 year premium version AutoExplor license. Software updates when available, and unlock keys to upgrade to the full version can be downloaded directly from this website. * AutoExplor software warranty per user manual (download below). LabView is a trademark of National Instruments.

Serial to USB Cable to Run AutoExplor Software for ExploraVAC Systems on Remote Computer or Laptop, 10 ft. This cable allows you to connect a Windows 10 or 11 computer or laptop with the AutoExplor system control software to an ExploraVAC series thermal vacuum chamber system. Note: This cable is for ExploraVAC series systems only. It is not used with ExploraVAC MAX series systems. A serial (DB9-Male) molded connector is on one end, and a molded USB Type A connector is on the other. This adapter cable uses the FTDI chipset and is 10 ft. Long. Drivers for this cable are preinstalled in Windows. Once the cable is plugged in, a COM port is automatically assigned and AutoExplor will automatically communicate with the ExploraVAC system. If a driver is needed, download it here.

ExploraVac to XtremeFreez LN2 Cryogenic Cooling System Serial Cable, Female DB9 to Female DB15 Connectors, 10 ft. This is a special serial cable which provides RS232 communication between the Ideal Vacuum XtremeFreez LN2 cryogenic cooling system and an ExploraVAC thermal vacuum system. The cable has a female DB9 connector on one end, and a female DB15 connector on the other. The cable is 10 ft. long (3 meters).