Edwards TIC Instrument Controller, 3 sensor head, RS232 / RS485 Interface Edwards Part Number D39722000 The TIC Instrument Pressure Controller provides compact control with a large, clear graphical display, an intuitive user interface and serial communications. The supplied Windows based PC program provides full remote setup, control and data logging functions via the RS232 interface. This is the three sensor head version and can accommodate 3 active pressure gauges. This TIC automatically recognizes and controls active gauges including APG100 Pirani, AGPX convection, ASG Strain, ATC thermocouple, AIM-X inverted magnetron, WRG wide range and AIGX active ion gauges. To enable complete integration into PC and PLC controlled processes, and includes RS232 and RS485 interface. In most instances, TIC systems may be simply and quickly configured using the range of standard cables offered. There is no need for the customer to prepare relay boxes, DC Power Supplies and Volt Meters to read and figure out pressures via pressure conversion charts. The TIC is an all in one pressure status controller reading Torr, pascal or mbar. THe TIC controller includes lookup tables for a range of commonly encountered process gasses (N2, He, Ar, CO2, Kr & Ne). Selecting the appropriate gas on the TIC enables direct readout of the correct pressure without the need to apply different gas conversion factors. NOTE: This is NOT the TIC Turbo and Instrument Controller model sold on this website P/Ns P106128, P105874, P106074, P106075, which controls Edwards turbo pumps and also reads pressure measurement. This TIC only reads vacuum pressure from the Edwards Active Pressure Gauges. For complete specs and function of this 3 sensor head TIC Instrument Pressure Controller scroll down to the .pdf Instruction Manual below at AVAILABLE DOWNLOADS: Features Include: Pressure Range From 1500 to 10-10 Torr Reads 3 or 6 sensor gauges depending on model Recognizes and controls Edwards Active AGP, APGX, ATC, ASG, AIM, AIGX-S, WRG Gauges Measures direct readout (N2, He, Ar, CO2, Kr & Ne) process gases RS232 / RS485 Interface 6 Pressure related set points CSA, C/US approved 115-240 VAC

Edwards TIC Instrument Controller, 6 sensor head, RS232 / RS485 Interface Edwards Part Number D39701000 The TIC Instrument Pressure Controller provides compact control with a large, clear graphical display, an intuitive user interface and serial communications. The supplied Windows based PC program provides full remote setup, control and data logging functions via the RS232 interface. This is the three sensor head version and can accommodate 6 active pressure gauges. This TIC automatically recognizes and controls active gauges including APG100 Pirani, AGPX convection, ASG Strain, ATC thermocouple, AIM-X inverted magnetron, WRG wide range and AIGX active ion gauges. To enable complete integration into PC and PLC controlled processes, and includes RS232 and RS485 interface. In most instances, TIC systems may be simply and quickly configured using the range of standard cables offered. There is no need for the customer to prepare relay boxes, DC Power Supplies and Volt Meters to read and figure out pressures via pressure conversion charts. The TIC is an all in one pressure status controller reading Torr, pascal or mbar. THe TIC controller includes lookup tables for a range of commonly encountered process gasses (N2, He, Ar, CO2, Kr & Ne). Selecting the appropriate gas on the TIC enables direct readout of the correct pressure without the need to apply different gas conversion factors. NOTE: This is NOT the TIC Turbo and Instrument Controller model sold on this website P/Ns P106128, P105874, P106074, P106075, which controls Edwards turbo pumps and also reads pressure measurement. This TIC only reads vacuum pressure from the Edwards Active Pressure Gauges. For complete specs and function of this 6 sensor head TIC Instrument Pressure Controller scroll down to the .pdf Instruction Manual below at AVAILABLE DOWNLOADS: Features Include: Pressure Range From 1500 to 10-10 Torr Reads 3 or 6 sensor gauges depending on model Recognizes and controls Edwards Active AGP, APGX, ATC, ASG, AIM, AIGX-S, WRG Gauges Measures direct readout (N2, He, Ar, CO2, Kr & Ne) process gases RS232 / RS485 Interface 6 Pressure related set points CSA, C/US approved 115-240 VAC

Edwards Adapter Cable, TIC Controller to Barocel Capacitance Diaphragm Gauges, PN: D40003050. Edwards Part Number: D40003050. This Edwards OEM adapter cable allows a Barocel capacitance diaphragm gauge to be connected to the TIC 6 Head Instrument Controller (P107177, OEM PN: D39701000). Note that Barocel gauges are not compatible with the TIC 3 head controller (D39722000). This adapter cable can be used with these gauges: 7025 7025M-miniturised version 7045 7100

Serial to USB Cable Connectivity Kit for IVP XG-120 and Other Controllers, Connects Serial RS232 to ComputerThis cable connectivity kit is needed for transferring data from an Ideal Vacuum XG-120 digital thermocouple gauge controller or any other controller with a serial output to a remote PLC or computer via RS232 serial communication, when the computer does not have a serial port. Most modern machines do not have a built in serial port, but do have a USB port. This kit consists of a 6 ft. Serial-to-USB cable and null modem adapter (controller sold separately). The cable’s DB9 male connector attaches through the null modem adapter onto the back of the controller, which has a DB9 female connector. The USB 2.0 type A connector plugs in to the computer’s USB port. Some controllers may have a DB25 serial interface in which case a DB25-to-DB9 adapter would be required. Controllers with serial interfaces include: IVP XG-120 Thermocouple Gauge Controller P108447, P108370 Agilent Varian RGC-150 Rough Thermocouple Gauge Controller, P105092 Agilent XGS-600 Vacuum Gauge Controller, P104122 Edwards Active Digital Pressure Controller, P107267 Edwards TIC Instrument Controller, P107177 Our serial-to-USB cable uses the FTDI chipset for ultimate compatibility with virtually all recent Windows, Mac and Linux platforms. Windows has built in drivers for the FTDI chipset. A variety of free, readily available, RS232 terminal software is available for online download, including PuTTY and TERMITE, which allows you to remotely monitor the output of vacuum pressure readings. Instructions for connecting and monitoring the XG-120 via RS232 serial communication are located here in the PDF downloads.