Keyword Part Number:
Anest Iwata ISP-250E Oil-Free Dry Scroll Vacuum Pump, KF-25 Inlet, Single Phase 115/230 VAC, Set to 115 VAC. Anest Iwata Part Number: ISP-250E-SV. These Anest Iwata ISP-250E oil-free dry scroll pumps operate on 1-phase, 100-115 or 200-230 VAC, 50/60 Hz, set to 115 VAC. Displacement for this Anest Iwata ISP-250E is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.
Condition: New
Part Number: P1013258
Price: E£339,453.18
Regular Price: E£377,170.20
Anest Iwata ISP-250E Oil-Free Dry Scroll Vacuum Pump, KF-25 Inlet, Three Phase 200-230/380-480 VAC, set to 230 VAC. Anest Iwata Part Number: ISP-250E-TV. These Anest Iwata ISP-250E oil-free dry scroll pumps operate on three phase, 200-230/380-480 VAC, set to 230 VAC. Displacement for this Anest Iwata ISP-250E is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-TV specifies Three-Phase (T) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.
Condition: New
Part Number: P1013260
Price: E£339,453.18
Regular Price: E£377,170.20
Anest Iwata ISP-250E Oil-Free Dry Scroll Vacuum Pump, KF-25 Inlet, Single Phase 110/115 VAC. Anest Iwata Part Number: ISP-250E-SV-D1. These Anest Iwata ISP-250E oil-free dry scroll pumps operate on three phase, 110/115 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-250E is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.
Condition: New
Part Number: P1013261
Price: E£407,870.10
Regular Price: E£453,189.00
Anest Iwata ISP-250E Oil-Free Dry Scroll Vacuum Pump, KF-25 Inlet, Single Phase 200/230 VAC. Anest Iwata Part Number: ISP-250E-SV-D2. These Anest Iwata ISP-250E oil-free dry scroll pumps operate on single phase, 200/230 VAC, 50/60 Hz. Displacement for this Anest Iwata ISP-250E is 10.6 CFM at 60 Hz. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.
Condition: New
Part Number: P1013262
Price: E£407,870.10
Regular Price: E£453,189.00
Anest Iwata ISP-250E Oil-Free Dry Scroll Vacuum Pump with Explosion Proof Motor, KF-25 Inlet, Single Phase 100/230 VAC, Set to 115 VAC. Anest Iwata Part Number: ISP-250E-SV-EX. These Anest Iwata ISP-250E oil-free dry scroll pumps with explosion proof motor operate on single phase, 100-115 or 200-230 VAC, 50/60 Hz, set to 115 VAC. Displacement for this Anest Iwata ISP-250E-SV-EX is 10.6 CFM at 60 Hz., and 1x10-2 Torr ultimate pressure. The Anest Iwata ISP-250E-SV-EX is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-SV specifies Single-Phase (S) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.
Condition: New
Part Number: P1013263
Price: E£457,428.51
Regular Price: E£508,253.90
Anest Iwata ISP-250E Oil-Free Dry Scroll Vacuum Pump with Explosion Proof motor, KF-25 Inlet, Three Phase 200-230/380-480 VAC, set to 230 VAC. Anest Iwata Part Number: ISP-250E-TV-EX. These Anest Iwata ISP-250E oil-free dry scroll pumps explosion proof motor operate on three phase, 200-230/380-480 VAC, set to 230 VAC. Displacement for this Anest Iwata ISP-250E-TV-EX is 10.6 CFM at 60 Hz., and 1x10-2 Torr ultimate pressure. The Anest Iwata ISP-250E-TV-EX is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace. Excellent alternative to oil sealed rotary vane pumps. The part number ISP-250E-TV specifies Three-Phase (T) with vertical oriented intake flange (V). The operating instructions manual is available for down in PDF format below. APPLICATIONS Sputtering equipment, Vacuum deposition equipment, Ion plating equipment Accelerator, Synchrotron Radiation Surface modification, Electron beam process Gas recovery devices Vacuum equipment Leak detectors Device handling system Vacuum furnace, Heat treatment furnace Laboratory use Vacuum packaging machine The Anest Iwata ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.
Condition: New
Part Number: P1013264
Price: E£457,428.51
Regular Price: E£508,253.90
Anest Iwata ISP-250E Dry Scroll Complete Pump Module Replacement, KF-25 Inlet. Anest Iwata Part Number: VSD-250E. This Anest Iwata OEM complete pump module for the ISP-205E dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. This new module is complete with the outboard, orbiting and inboard scroll plates. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty. Anest Iwata ISP-250E oil-free dry scroll pumps have a pumping speed of 10.6 CFM (18 m3/hr.) at 60hz and reach an ultimate vacuum of 1x10-2 Torr. The Anest Iwata ISP-250E is economical and inexpensive to operate, offers high performance, compact design and very light. Little routine maintenance, no oil changes, filters or foreline traps to replace make the Anest Iwata an excellent alternative to oil sealed rotary vane pumps.
Condition: New
Part Number: P1013275
Price: E£277,176.24
Regular Price: E£307,973.60
Anest Iwata ISP-250E Scroll Vacuum Pump Tip Seal Replacement Kit. Anest Iwata Part Number: 98882270. This is a tip seal kit for the Anest Iwata ISP-250E dry scroll pumps. These tip seal kits are Anest Iwata OEM parts.
Condition: New
Part Number: P1013313
Price: E£40,202.25
Anest Iwata ISP-250E Scroll Vacuum Pump Major Repair Kit. Anest Iwata Part Number: 98819940. This Anest Iwata ISP-250E major service kits include air flush kit, seal set, bearing kit, grease kit, exhaust valve set, O-ring set and tip seal set. This is a complete major overhaul kit. This is a Anest Iwata ISP-250E major repair kit only. The Anest Iwata ISP-250E major service repair kits are OEM parts.
Condition: New
Part Number: P1013315
Price: E£92,353.10
Anest Iwata ISP 250E Dry Scroll Vacuum Pump Replacement Shaft. Anest Iwata Part Number: 98819890. Anest Iwata replacement shaft for ISP-250E/ISP 250E Dry Scroll Vacuum Pumps. The Anest Iwata ISP-500B/ISP-500C replacement shafts are guaranteed to meet or exceed OEM specifications.
Condition: New
Part Number: P1013283
Price: E£46,415.33
Anest Iwata Pin Crank Kit for Anest Iwata ISP-250E Dry Scroll Vacuum Pumps. Anest Iwata Part Number: 98820680. These are the pin crank kit for the Anest Iwata ISP250E/ISP-250E Dry Scroll Vacuum Pumps. These Anesta Iwata ISP-500B/ISP-500C minor service repair kits are OEM products.
Condition: New
Part Number: P1013284
Price: E£46,293.50
Anest Iwata Bearing Kit for Anest Iwata ISP-250E Dry Scroll Vacuum Pumps. Anest Iwata Part Number: 98820650. This is a bearing kit for the Anest Iwata ISP250E/ISP-250E Dry Scroll vacuum pumps.
Condition: New
Part Number: P1013285
Price: E£31,837.75
Anest Iwata Grease Kit for Anest Iwata Dry Scroll Vacuum Pumps. Anest Iwata Part Number: 98883101. These are Anest Iwata Grease Kit for Anest Iwata Dry Scroll Vacuum Pumps. These Anest Iwata grease kits are OEM products.
Condition: New
Part Number: P1013289
Price: E£8,388.38
Filter Media HEPA for Foreline Traps KF-16 (P1013392) and KF-25 (P101861). This HEPA Media is for KF-16 (P1013392) and KF-25 (P101861) Foreline Traps on this website. This is only one HEPA media filter, the foreline trap is sold separately. Details for this HEPA filter: Reinforced with epoxy coated steel wire on both sides of cloth Maximum oversize required to minimize pressure drop Heavy duty industrial strength glass surrounded by heavy gauge expanded metal Optimal sealing surface & design Filter change out differential: 10"-15" in. H2O above initial delta P Temp (continuous): min -15° F ( -26° C) max 220° F 99.97% removal efficiency standard to 0.3 micron Handles hot air and oil mist from rotary vane vacuum pumps Moisture resistant More durable than paper media Less maintenance Dust loading capacity is increased 40 % - 50% with polyurethane prefilter
Condition: New
Part Number: P103608
Price: E£4,629.35
Foreline Trap for Inlet KF16 Rotary Vane Vacuum Pumps up to 18 CFM. This Foreline Trap NW16, KF-16 serves to prevent contaminants from entering the pump inlet and protects the system from pump fluid or particulate migration. (Backstreaming) This trap extends the life of the pump, cuts maintenance costs and helps prevent system downtime. Made of durable corrosive resistant nickel chrome finish which prevents outgassing. Interchangeable Filter Media is not included with this foreline trap but is available from this website. Filter Media options include, Activated Alumina, Stainless Steel Wire Mesh, Activated Carbon Granulate and Polyester Media. Common Dimensions & Specifications:Use with vacuum pumps KF-16, NW16 Inlets and up to 18 CFM pumping speeds. A= 4"B= 2-3/16"C= 3-3/4"
Condition: New
Part Number: P1013392
Price: E£11,061.71
Foreline Trap for Inlet KF25 Rotary Vane Vacuum Pumps up to 18 CFM. This Foreline Trap NW25 KF25 serves to prevent contaminants from entering the pump inlet and protects the system from pump fluid or particulate migration. (Backstreaming) This trap extends the life of the pump, cuts maintenance costs and helps prevent system downtime. Made of durable corrosive resistant nickel chrome finish which prevents outgassing. Interchangeable Filter Media is not included with this foreline trap but is available from this website. Filter Media options include, Activated Alumina, Stainless Steel Wire Mesh, Activated Carbon Granulate and Polyester Media. Common Dimensions & Specifications:Use with vacuum pumps KF25 NW25 Inlets and up to 18 CFM pumping speeds. A= 4"B= 2-3/16"C= 3-3/4"
Condition: New
Part Number: P101861
Price: E£17,764.52
NEW Exhaust Silencer for Dry Scroll Pumps or Rotary Lobe Vacuum Pumps, Flow Rate up to 9 CFM, KF16 FlangeThese silencers are for use on dry scroll pumps and dry rotary lobe vacuum pumps that are not connected to a house exhaust system. The are designed for clean dry air (CDA) vacuum pumping applications where the exhaust is vented into the room. They greatly silence the exhaust of dry pumps and come with replaceable internal filter media. These media filters provide exhaust filtration to capture tip seal dust that is produced in dry scroll pumps. These exhaust silencers are equipment with an NW-16 (KF-16) vacuum flange and are rated for use up to 9 CFM.
Condition: New
Part Number: P103342
Price: E£21,352.02
Filter Paper ELEMENT for Dry Pump Exhaust Silencer Kits, PN P103343, P103342, P102553, A50597000Used on Edwards XDS5, XDS10, Varian Agilent Tri Scroll 300, SH100, SH110, Kashiyama Neo Dry 15C Ebara EV-A03This is a replacement filter paper element for dry pumps with exhaust silencer kits, PN P103343, P103342, P102553, A50597000, This is the filter paper element only. The complete exhaust silincer filter system is separately.
Condition: New
Part Number: P103975
Price: E£7,829.94
Ideal Vacuum XactGauge Convection-Enhanced Pirani Gauge Kit, XGC-320 Controller, XGC-321 KF-25 Gauge, 10 ft. Sensor Cable, PS, 2 Set Points Complete Kit Includes: XactGauge XGC-320 Convection-Enhanced Controller, XGC-321 KF-25 Sensor Gauge, 3 m (10 ft.) Sensor Cable & Power Supply. Features: Inexpensive solution for Pirani type thermal conductivity gauges Convection-Enhanced Pirani sensor gauges available in 8 different flange sizes Accurate pressure measurements from 1x10-4 to 1000 Torr Compact 1/8-DIN package fits on bench or in instrument panel cutout Bright, easy to read, 4 digit OLED display Intuitive front panel controls for calibration and parameter adjustments Switch between Torr, mBar and Pa units quickly Serial RS232/RS485 DB9 I/O interface for remote control 2 set points 4 analog outputs Compatible with Granville-Phillips® 275 Convectron® and Inficon PGE050 Pirani Gauge Enhanced sensors and cables. The Ideal Vacuum XactGauge XGC-320 Convection Enhanced Pirani Gauge Controller is an inexpensive solution for simple readout of Pirani type thermal conductivity gauges with added features for ease of use and system integration. Use with any of our eight (8) XactGauge Enhanced Pirani Sensor Gauges to obtain accurate pressure measurements ranging from 1x10-4 to 1000 Torr. Our XactGauge XGC-320 Controller, conveniently housed in a compact 1/8-DIN enclosure, can be used on your benchtop or mounted in an instrument panel cutout. The bright, OLED 4 digit display is easy to read. Intuitive front panel controls allow direct gauge calibration and simple adjustment of vacuum measurement parameters. The XactGauge XGC-320 Convection-Enhanced Pirani Gauge Controller is powered by user supplied 12 to 28 VDC, 2 W, or by our XactGauge Enhanced Pirani Controller power supply. The XGC-320 Controller has a serial RS232/RS485 (DB-9) remote I/O interface, two (2) setpoints, and four (4) analog relay outputs, each rated at 1 A at 30 VDC. This XGC-320 Controller is compatible with other manufacturer’s Pirani type gauges and cables, including the Granville-Phillips® 275 Convectron® and the Inficon PGE050 Pirani Gauge Enhanced. Thermal conductivity gauges measure pressure indirectly by sensing the loss of heat from a sensor to the surrounding gas. The higher the pressure of the gas, the more heat is conducted away from the sensor. Pirani thermal conductivity gauges maintain a sensor (usually a wire) at a constant temperature and measure the current or power required to maintain that temperature. A standard Pirani gauge has a useful measuring range of about 10-4 Torr to 10 Torr. Convection-enhanced Pirani gauges take advantage of the convection current inside the sensor to extend the pressure measurement range to just above atmosphere. The XactGauge is supplied factory calibrated using Nitrogen (N2) gas. When measuring gasses other than Nitrogen/Air, accurate correction must be made for the difference in thermal conductivity between nitrogen and the gas in use, particularly at pressures above 1 Torr. DO NOT USE for explosive, corrosive or toxic gasses.
Condition: New
Part Number: P1010252
Price: E£59,259.58
Regular Price: E£69,717.04