Helium Side Repair Kit for CTI Cryo-Torr 7 and 100 Cryopump This is a CTI Cryo-Torr 7 or 100 Cryopump Helium Side Repair Kit. The CTI-Cryogenics Cryo-Torr 7 or 100 pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CTI 7 or 100 Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr 7 or 100 Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download to the side.

Minor Maintenance Kit for CTI Cryo-Torr CT-8/8F Cryopump This is a minor maintenance kit with the necessary O-rings and parts needed to repair a CTI Cryo-Torr CT-8/8F Cryo-pump. The CTI-Cryogenics Cryo-Torr CT-8/8F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8/8F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-8/8F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

Major Maintenance Kit for CTI Cryo-Torr 8/8F Cryopump Maintenance Kit Only - Cross Reference Part Number 100151 This is a major maintenance kit with the necessary O-rings, displacers and bearings needed to repair a CT-8/8F Cryo-Pump The CTI-Crogenics Cryo-Torr 8/8F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8/8F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-8/8F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download to the side.

Major Maintenance Kit for CTI Cryo-Torr 8/8F Cryopump, 3PH Bearing PN: 100151-3 Maintenance Kit Only This is a major maintenance kit with the necessary O-rings, displacers and bearings needed to repair a CT-8/8F Cryo-Pump. This Major Mainenance Kit comes with a 3 Phase bearing replacement. The CTI-Crogenics Cryo-Torr 8/8F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8/8F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-8/8F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download to the side.

Minor Maintenance Kit for CTI Cryo-Torr CT-10/10F Cryopump Maintenance Kit Only This is a minor maintenance kit with the necessary O-rings and parts needed to repair a CT-10/10F Cryo-Pump The CTI-Crogenics Cryo-Torr 10/10F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-10/10F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-10/10F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

Major Maintenance Kit for CTI Cryo-Torr CT-10/10F Cryopump Maintenance Kit Only This is a major maintenance kit with the necessary O-rings, displacers and bearings needed to repair a CT-10/10F Cryo-Pump The CTI-Crogenics Cryo-Torr 10/10F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-10/10F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-10/10F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

Major Maintenance Kit for CTI Cryo-Torr CT-10/10F Cryopump, 3PH Bearing Maintenance Kit Only This is a major maintenance kit with the necessary O-rings, displacers and bearings needed to repair a CT-10/10F Cryo-Pump. This Major maintenance Kit comes with a 3 Phase bearing replacement. The CTI-Crogenics Cryo-Torr 10/10F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-10/10F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-10/10F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

Minor Maintenance Kit for CTI Cryo-Torr 400/500 Cryopump Maintenance Kit Only This is a minor maintenance kit with the necessary O-rings and parts needed to repair a CTI Cryo-Torr CT-400/500 Cryo-pump. The CTI-Cryogenics Cryo-Torr CT-400/500 pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-400/500 Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-400/500 Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. The Cryo-Torr CT-400/500 works with SC Helium Compressor and 8200, 8600, 9000 Helium Compressors. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

Major Maintenance Kit for CTI Cryo-Torr 400/500 Cryopump Maintenance Kit Only This is a major maintenance kit with the necessary O-rings, displacers and bearings needed to repair a CTI Cryo-Torr CT-400/500 Cryo-pump. The CTI-Cryogenics Cryo-Torr CT-400/500 pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-400/500 Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-400/500 Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. The Cryo-Torr CT-400/500 works with SC Helium Compressor and 8200, 8600, 9000 Helium Compressors. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

Major Maintenance Kit for CTI Cryo-Torr 400/500 Cryopump, 3PH Bearing PN: 100153-3 Maintenance Kit Only This is a major maintenance kit with the necessary O-rings, displacers and bearings needed to repair a CTI Cryo-Torr CT-400/500 Cryo-pump. This major maintenance kit comes with a 3 phase bearing replacement. The CTI-Cryogenics Cryo-Torr CT-400/500 pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-400/500 Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-400/500 Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. The Cryo-Torr CT-400/500 works with SC Helium Compressor and 8200, 8600, 9000 Helium Compressors. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

15k Array Kit for CTI Cryo-Torr 8 Cryopump Maintenance Kit Only This is a replacement 15k Array for a CTI Cryo-Torr 8 cryo pump. It contains all the necessary components to replace the charcoal array in a CTI Cryo-Torr 8 Cryo pump including, Top Plate and Indium Gaskets. The CTI-Cryogenics Cryo-Torr CT-8/8F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8/8F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-8/8F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

15k Array Kit for CTI Cryo-Torr 8 ON-BOARD Cryopump Maintenance Kit Only This is a replacement 15k Array for a CTI Cryo-Torr 8 ON-BOARD cryo pump. It contains all the necessary components to replace the charcoal array in a CTI Cryo-Torr 8 ON-BOARD Cryo pump including, Top Plate and Indium Gaskets. The CTI-Cryogenics Cryo-Torr CT-8 ON-BOARD pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8 ON-BOARD Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-8 ON-BOARD Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

15k Array Kit for CTI Cryo-Torr 10 Cryopump Maintenance Kit Only This is a replacement 15k Array for a CTI Cryo-Torr 10 cryo pump. It contains all the necessary components to replace the charcoal array in a CTI Cryo-Torr 10 Cryo pump including, Top Plate and Indium Gaskets. The CTI-Cryogenics Cryo-Torr CT-10/10F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-10/10F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-8/8F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

15k Array Kit for CTI Cryo-Torr 10 ON-BOARD Cryopump Maintenance Kit Only This is a replacement 15k Array for a CTI Cryo-Torr 10 ON-BOARD cryo pump. It contains all the necessary components to replace the charcoal array in a CTI Cryo-Torr 10 Cryo pump including, Top Plate and Indium Gaskets. The CTI-Cryogenics Cryo-Torr CT-10 ON-BOARD pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-10 ON-BOARD Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. The Cryo-Torr CT-8/8F Pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

CTI Cryo-Torr CT-100 Cryopump 15k Array Kit Maintenance Kit OnlyThis is a replacement 15k Array for an Edwards CTI Cryo-Torr CT-100 cryo pump. It contains all the necessary components to replace the charcoal array in a CTI Cryo-Torr CT-100 Cryo pump including, Top Plate and Indium Gaskets.The Edwards CTI-Cryogenics Cryo-Torr CT-100 pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-100Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are totally covered in the Cryo Torr Pump Installation, Operation and Maintenace Instructions .pdf for download below.

CTI Cryo-Torr CT-400 Cryopump 15k Charcoal Array Kit. 15K Array Kit Only This is a replacement 15k Charcoal Array Kit for a CTI Cryo-Torr CT-400 cryo pump. The CTI-Cryogenics Cryo-Torr CT-400 pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-400 Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.

Brooks CTI Cryo-Torr CT-8F Cryopump 15K Charcoal Array. 15K Charcoal Array Only This is a replacement 15k Charcoal Array for a CTI Cryo-Torr CT-8F cryo pump. The CTI-Cryogenics Cryo-Torr CT-8F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.

Indium Gasket Set, Pre-cut, For CTI CT-8 Cryopumps. Gasket Set Only This is a replacement Indiium Gasket Pre-cut Set for the CTI CT-8 Cryopumps. The CTI-Cryogenics Cryo-Torr CT-8 pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8 Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.

Indium Gasket Set, Pre-cut, For CTI CT-8F Cryopumps. Gasket Set Only This is a replacement Indiium Gasket Pre-cut Set for the CTI CT-8F Cryopumps. The CTI-Cryogenics Cryo-Torr CT-8F pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8F Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.

Indium Gasket Set, Pre-cut, For CTI CT-8 ON-BOARD Cryopumps. Gasket Set Only This is a replacement Indiium Gasket Pre-cut Set for the CTI CT-8 ON-BOARD Cryopumps. The CTI-Cryogenics Cryo-Torr CT-8 ON-BOARD pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8 ON-BOARD Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.

Indium Gasket Set, Pre-cut, For CTI CT-8F ON-BOARD Cryopumps. Gasket Set Only This is a replacement Indiium Gasket Pre-cut Set for the CTI CT-8F ON-BOARD Cryopumps. The CTI-Cryogenics Cryo-Torr CT-8F ON-BOARD pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr CT-8F ON-BOARD Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.

Indium Gasket Set, Pre-cut, For CTI CT-10 Cryopumps. Gasket Set Only This is a replacement Indiium Gasket Pre-cut Set for the CTI CT-10 Cryopumps. The CTI-Cryogenics Cryo-Torr CT-10 pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr 10 Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.

Indium Gasket Set, Pre-cut, For CTI CT-10 ON-BOARD Cryopumps. Gasket Set Only This is a replacement Indiium Gasket Pre-cut Set for the CTI CT-10 ON-BOARD Cryopumps. The CTI-Cryogenics Cryo-Torr CT-10 ON-BOARD pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr 10 ON-BOARD Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.

Indium Gasket Set, Pre-cut, For CTI CT-400 ON-BOARD Cryopumps. Gasket Set Only This is a replacement Indiium Gasket Pre-cut Set for the CTI CT-400 ON-BOARD Cryopumps. The CTI-Cryogenics Cryo-Torr CT-400 ON-BOARD pumps, are one of the two major components that make up the Cryo-Torr Pumping System. The second component is the Compressor (also sold on this website). The Cryo-Torr 400 ON-BOARD Cryopump, provides fast, clean pumping of all gases in the 10-3 to 10-9 Torr range. Standard applications include, Semiconductor, Aerospace & Vacuum coating as well as R&D. The cryo-pump operates on the principle that gases can be condensed and held at extremely low vapor pressures, achieving high speeds and through puts. This pump is a highly-reliable and rugged unit that requires minimal servicing. Since the cryo-pump exposes no moving parts, operating fluids, or backing pumps to the vacuum, the possibility of system or process contamination from the cryo-pump itself is eliminated. Descripition, Installation, Regeneration, and Maintenance Procedures are covered in the .pdf at the downloads section to the side.