12 x 12 x 12 Cubic Modular Vacuum Chamber Basic Chamber Development Kit with KF Ports, 1 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble basic chamber development kit with KF-16, KF-25, KF-40, and ISO ports. It includes everything needed to assemble a 1.0 cu. ft. cubic vacuum chamber including a 12 x 12 x 12 inch Cube frame, and six 12 x 12 inch Cube plates, all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 12 x 12 x 12 basic cubic chamber development kit includes: 12 x 12 x 12 Cube frame (P107540) 12 x 12 x 12 Cube assembly hardware kit (P108176, includes plate seals and mounting screws) One 12 x 12 plate with one KF-50, two KF-40, two KF-25, and two KF-16 ports (P108174) One 12 x 12 ISO-F 100 plate (P108153) Four 12 x 12 blank plates (P108171) Rubber vibration isolating foot kit Centering rings, bulkhead clamps, and blanks for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube. ? ?

12 x 12 x 12 Cubic Modular Vacuum Chamber Advanced Development Kit with with Viewing Window Door, KF, and ISO Ports, 1 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble advanced chamber development kit prepped with KF and ISO ports. It comes with an easy-to-open 12 x 12 door with viewing window. It includes everything needed to assemble a 1.0 cu. ft. vacuum chamber including a 12 x 12 x 12 inch Cube frame, six 12 x 12 inch Cube plates (one is a door with viewing window), all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 12 x 12 x 12 advanced chamber development kit for high vacuum includes: 12 x 12 x 12 Cube frame (P107540) 12 x 12 x 12 Cube assembly hardware kit (P108176, includes plate seals and mounting screws) One 12 x 12 plate with one KF-50, two KF-40, two KF-25, and two KF-16 ports (P108174) One 12 x 12 ISO-F 100 plate (P108153) One 12 x 12 door kit with tempered glass viewing window, hinges, and quick knobs for easy opening Three 12 x 12 blank plates (P108171) Rubber vibration isolating foot kit Centering rings, KF bulkhead and ISO claw clamps, and blanks for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube. ? ?

12 x 12 x 12 Cubic Modular Vacuum Chamber Heated Development Kit with Viewing Window Door, KF and Conflat CF Ports, 1 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble heated chamber development kit prepped with KF and Conflat CF ports. It comes with an easy-to-open 12 x 12 door with viewing window. It includes everything needed to assemble a 1.0 cu. ft. heated vacuum chamber including a 12 x 12 x 12 inch Cube frame, four 12 x 12 plates, one 12 x 12 heated plate, one 12 x 12 inch door with viewing window, all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Note that the CF ports are NOT compatible with copper gaskets. Use with Viton CF gaskets ONLY! Cube plates of a given size can be mounted to any similar frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 12 x 12 x 12 heated chamber development kit includes: 12 x 12 x 12 Cube frame (P107540) 12 x 12 x 12 Cube assembly hardware kit (P108176, includes plate seals and mounting screws) One 12 x 12 plate with one KF-50, two KF-40, two KF-25, and two KF-16 ports (P108174) One 12 x 12 plate with one CF 4.5" and four CF 2.75" ports (P108173) One 12 x 12 door kit with tempered glass viewing window, hinges, and quick knobs for easy opening Two 12 x 12 blank plates (P108171) One 12 x 12 heater plate for up to 140°C (P108320) Offset rubber vibration isolating foot kit Centering rings and bulkhead clamps for KF ports, Viton gaskets for CF ports, KF bulkhead clamps, blanks and hardware for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube. ? ?

12 x 12 x 12 Cubic Modular Vacuum Chamber Thermally Controlled Development Kit with Viewing Window Door, KF and Conflat CF Ports, 1 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble thermally controlled chamber development kit prepped with KF and Conflat CF ports. The kit comes with an easy-to-open 12 x 12 door with viewing window. It includes everything needed to assemble a 1.0 cu. ft. thermally controlled vacuum chamber including a 12 x 12 x 12 inch Cube frame, four 12 x 12 plates, one 12 x 12 non-thermally isolated plate for circulating hot and cold fluids within the operating range of 150°C to -26°C (302°F to -15°F). A heated/cooled recirculating system is required. Fluid connections are 3/8" OD tubing. This kit also includes one 12 x 12 inch door with viewing window and all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Note that the CF ports are NOT compatible with copper gaskets. Use with Viton CF gaskets ONLY! Cube plates of a given size can be mounted to any similar frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 12 x 12 x 12 thermally controlled chamber development kit includes: 12 x 12 x 12 Cube frame (P107540) 12 x 12 x 12 Cube assembly hardware kit (P108176, includes plate seals and mounting screws) One 12 x 12 plate with one KF-50, two KF-40, two KF-25, and two KF-16 ports (P108174) One 12 x 12 plate with one CF 4.5" and four CF 2.75" ports (P108173) One 12 x 12 door kit with tempered glass viewing window, hinges, and quick knobs for easy opening Two 12 x 12 blank plates (P108171) One 12 x 12 non-thermally insulated plate for circulating hot or cold fluids (P108474) Offset rubber vibration isolating foot kit Centering rings and bulkhead clamps for KF ports, Viton gaskets for CF ports, KF bulkhead clamps, blanks and hardware for all ports ? ?