Keyword Part Number:
Bolt Kit for Connecting ISO-F DN 63, 80, 100 Hole Through Flange to Threaded Bulkhead Weld-On Flange, Includes 1 Silver Plated M8 x 1.25 x 30 mm Long Bolt and1 Stainless Steel Washer. These bolt kits consist of 1 hex head, silver plated M8 x 1.25 x 30 mm long bolt and 1 stainless steel flat washer. The bolts are the correct length for connecting standard ISO-F 63, 80 or 100 hole through flanges or fittings to the same size ISO threaded bulkhead flanges without bottoming out. The bolts are silver plated to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they have been heated to bakeout temperatures. A centering ring with O-ring seal is required and sold separately (see below). The number of bolt kits needed depends on the ISO-F flange size: ISO-63: Needs 4 kits ISO-80: Needs 8 kits ISO-100: Needs 8 kits If an ISO-K type flange is to be connected to a bulkhead ISO-F flange, a similar number of single claw clamps with longer bolts is needed (part number P108058, fits ISO 63, 80, and 100 flanges). The same centering ring is used for connecting ISO-F or ISO-K type flanges to an ISO-F threaded bulkhead flange. Centering Rings: ISO-63: Part number P101761 ISO-80: Part number P101762 ISO-100: Part number P101763 Bulkhead Threaded Weld-On Flanges: ISO-63: Part number P1013027 ISO-80: Part number P1013028 ISO-100: Part number P1013029
Condition: New
Part Number: P1013039
Price: Ft960.58
ISO-F DN 160, 200, 250 Bolt, for Tapped Bulkhead Weld-On Vacuum Flange, Metric M10 x 30 mm Long Bolts, 1.5 mm Pitch, 304 Stainless Steel, Silver Plated Sold As One Each, One Bolt and One WasherThese bolts are for tapped threaded hole flanges and follow ISO-LF standards for flange sizes of NW-160, NW-200, NW-250. ISO flanged vacuum fittings are commonly used to build process vacuum plumbing and systems for industrial applications. The fittings are quick to assemble using double claw clamps and a centering ring (please see top right figure - click to enlarge). The Viton® centering ring contains a rubber/elastomeric o-ring. The ISO standard sizes for large flanges are NW-63, NW-80, NW-100, NW-160, NW-200, NW-250, NW-320, NW-400, NW-500, NW-630, NW-800, NW-1000. These vacuum fittings are made of corrosive resistant 304 stainless steel.Bolt And Washer, for Tapped Threaded Hole NW-160, NW-200, NW-250, Vacuum Flanges, Stainless SteelFits ISO-LF Bulkhead Flange Size: NW-160, NW-200, NW-250Sold as Quantity: 1 Bolt And 1 WasherBolt Quantity Required:ISO-160: Needs 8 Each ISO-200: Needs 12 Each ISO-250: Needs 12 Each Common Dimensions: Bolt Size M10X30 Pitch 1.5mm
Condition: New
Part Number: P1013040
Price: Ft1,029.19
ISO-F DN 320, 400, 500, Bolt, for Tapped Bulkhead Weld-On Vacuum Flange, Metric M12 x 40 mm Long Bolts, 1.75 mm Pitch, 304 Stainless Steel, Silver Plated Sold As One Each, One Bolt and One WasherThese bolts are for tapped threaded hole flanges and follow ISO-LF standards for flange sizes of NW-320, NW-400, NW-500. ISO flanged vacuum fittings are commonly used to build process vacuum plumbing and systems for industrial applications. The fittings are quick to assemble using double claw clamps and a centering ring (please see top right figure - click to enlarge). The Viton® centering ring contains a rubber/elastomeric o-ring. The ISO standard sizes for large flanges are NW-63, NW-80, NW-100, NW-160, NW-200, NW-250, NW-320, NW-400, NW-500, NW-630, NW-800, NW-1000. These vacuum fittings are made of corrosive resistant 304 stainless steel.Bolt And Washer, for Tapped Threaded Hole NW-320, NW-400, NW-500, Vacuum Flanges, Stainless SteelFits ISO-LF Bulkhead Flange Size: NW-320, NW-400, NW-500Sold as Quantity: 1 Bolt And 1 WasherBolt Quantity RequiredISO-320: Needs 12 Each ISO-400: Needs 16 Each ISO-500: Needs 16 Each Common Dimensions: Bolt Size M12X40 Pitch 1.75mm
Condition: New
Part Number: P1013041
Price: Ft1,155.58
ISO-F DN 630, 800, 1000 Bolt, for Tapped Bulkhead Weld-On Vacuum Flange, Metric M12 x 50 mm Long Bolts, 1.75 mm Pitch, 304 Stainless Steel, Silver Plated Sold As One Each, One Bolt and One WasherThese bolts are for tapped threaded hole flanges and follow ISO-LF standards for flange sizes of NW-630, NW-800, NW-1000. ISO flanged vacuum fittings are commonly used to build process vacuum plumbing and systems for industrial applications. The fittings are quick to assemble using double claw clamps and a centering ring (please see top right figure - click to enlarge). The Viton® centering ring contains a rubber/elastomeric o-ring. The ISO standard sizes for large flanges are NW-63, NW-80, NW-100, NW-160, NW-200, NW-250, NW-320, NW-400, NW-500, NW-630, NW-800, NW-1000. These vacuum fittings are made of corrosive resistant 304 stainless steel.Bolt And Washer, for Tapped Threaded Hole NW-630, NW-800, NW-1000, Vacuum Flanges, Stainless SteelFits ISO-LF Bulkhead Flange Size: NW-630, NW-800, NW-1000Sold as Quantity: 1 Bolt And 1 WasherBolt Quantity RequiredISO-630: Needs 20 Each ISO-800: Needs 24 Each ISO-1000: Needs 32 Each Common Dimensions: Bolt Size M12X50 Pitch 1.75mm
Condition: New
Part Number: P1013042
Price: Ft1,256.70