Keyword Part Number:
ISO-F DN 63 Tapped m8 x 1.25 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 63 weld-on, tapped M8 x 1.25, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013039). To connect ISO-K type flanges or fittings, use single claw clamps (part number P108058) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P101761). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. These bulkhead flanges are a perfect solution when adding one of our HALO View vacuum windows to a new or existing chamber (part number P1011599). The minimal port length allows the greatest chamber viewing angle. 3D CAD models are available in the download section. ISO-F 63 Bulkhead Flange Dimensions:Number of bolt holes = 4 Ø A = 5.12 in. (130.0 mm) Ø B = 4.33 in. (109.1 mm) C = 0.610 in. (15.5 mm) D = M8 x 1.25 Ø G = 2.76 in. (70.1 mm)
Condition: New
Part Number: P1013027
Price: Ft37,368.52
ISO-F DN 80 Tapped m8 x 1.25 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 80 weld-on, tapped m8 x 1.25, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013039). To connect ISO-K type flanges or fittings, use single claw clamps (part number P108058) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P101762). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. These bulkhead flanges are a perfect solution when adding one of our HALO View vacuum windows to a new or existing chamber (part number P1011600). The minimal port length allows the greatest chamber viewing angle. 3D CAD models are available in the download section. ISO-F 80 Bulkhead Flange Dimensions:Number of bolt holes = 8 Ø A = 5.71 in. (145.0 mm) Ø B = 4.92 in. (124.1 mm) C = 0.610 in. (15.5 mm) D = M8 x 1.25 Ø G = 3.27 in. (6.5 mm)
Condition: New
Part Number: P1013028
Price: Ft41,222.37
ISO-F DN 100 Tapped M8 x 1.25 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 100 weld-on, tapped M8 x 1.25, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013039). To connect ISO-K type flanges or fittings, use single claw clamps (part number P108058) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P101763). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. These bulkhead flanges are a perfect solution when adding one of our HALO View vacuum windows to a new or existing chamber (part number P1011601). The minimal port length allows the greatest chamber viewing angle. 3D CAD models are available in the download section. ISO-F 100 Bulkhead Flange Dimensions:Number of bolt holes = 8 Ø A = 6.50 in. (165.1 mm) Ø B = 5.71 in. (145.0 mm) C = 0.610 in. (15.5 mm) D = M8 x 1.25 Ø G = 4.00 in. (101.6 mm)
Condition: New
Part Number: P1013029
Price: Ft59,016.73
ISO-F DN 160 Tapped M10 x 1.50 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 160 weld-on, tapped M10 x 1.50, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013040). To connect ISO-K type flanges or fittings, use single claw clamps (part number P1012767) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P101764). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. These bulkhead flanges are a perfect solution when adding one of our HALO View vacuum windows to a new or existing chamber (part number P1011602). The minimal port length allows the greatest chamber viewing angle. 3D CAD models are available in the download section. ISO-F 160 Bulkhead Flange Dimensions:Number of bolt holes = 8 Ø A = 8.86 in. (225.0 mm) Ø B = 7.85 in. (199.4 mm) C = 0.610 in. (15.5 mm) D = M10 x 1.50 Ø G = 6.00 in. (152.4 mm)
Condition: New
Part Number: P1013030
Price: Ft87,716.74
ISO-F DN 200 Tapped M10 x 1.50 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 200 weld-on, tapped M10 x 1.50, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013040). To connect ISO-K type flanges or fittings, use single claw clamps (part number P1012767) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P101765). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. These bulkhead flanges are a perfect solution when adding one of our HALO View vacuum windows to a new or existing chamber (part number P1011603). The minimal port length allows the greatest chamber viewing angle. 3D CAD models are available in the download section. ISO-F 200 Bulkhead Flange Dimensions:Number of bolt holes = 12 Ø A = 11.22 in. (285.0 mm) Ø B = 10.24 in. (260.0 mm) C = 0.610 in. (15.5 mm) D = M10 x 1.50 Ø G = 8.39 in. (213.1 mm)
Condition: New
Part Number: P1013031
Price: Ft106,025.19
ISO-F DN 250 Tapped M10 x 1.50 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 250 weld-on, tapped M10 x 1.50, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013040). To connect ISO-K type flanges or fittings, use single claw clamps (part number P1012767) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P105424). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. These bulkhead flanges are a perfect solution when adding one of our HALO View vacuum windows to a new or existing chamber (part number P1011604). The minimal port length allows the greatest chamber viewing angle. 3D CAD models are available in the download section. ISO-F 250 Bulkhead Flange Dimensions:Number of bolt holes = 12 Ø A = 13.19 in. (335.0 mm) Ø B = 12.20 in. (310.0 mm) C = 0.610 in. (15.5 mm) D = M10 x 1.50 Ø G = 10.28 in. (261.1 mm)
Condition: New
Part Number: P1013032
Price: Ft115,477.22
ISO-F DN 320 Tapped M12 x 1.75 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 320 weld-on, tapped M12 x 1.75, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013041). To connect ISO-K type flanges or fittings, use single claw clamps (part number P1012717) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P109020). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. 3D CAD models are available in the download section. ISO-F 320 Bulkhead Flange Dimensions:Number of bolt holes = 12 Ø A = 16.73 in. (425.0 mm) Ø B = 15.55 in. (395.0 mm) C = 0.787 in. (20.0 mm) D = M12 x 1.75 Ø G = 12.52 in. (318.0 mm)
Condition: New
Part Number: P1013033
Price: Ft322,436.40
ISO-F DN 400 Tapped M12 x 1.75 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 400 weld-on, tapped M12 x 1.75, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013041). To connect ISO-K type flanges or fittings, use single claw clamps (part number P1012717) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P1012723). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. 3D CAD models are available in the download section. ISO-F 400 Bulkhead Flange Dimensions:Number of bolt holes = 16 Ø A = 20.08 in. (510.0 mm) Ø B = 18.90 in. (480.1 mm) C = 0.787 in. (20.0 mm) D = M12 x 1.75 Ø G = 15.75 in. (400.0 mm)
Condition: New
Part Number: P1013034
Price: Ft492,874.42
ISO-F DN 500 Tapped M12 x 1.75 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 500 weld-on, tapped M12 x 1.75, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013041). To connect ISO-K type flanges or fittings, use single claw clamps (part number P1012717) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P1012744). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. 3D CAD models are available in the download section. ISO-F 500 Bulkhead Flange Dimensions:Number of bolt holes = 16 Ø A = 24.02 in. (610.1 mm) Ø B = 22.84 in. (580.1 mm) C = 0.787 in. (20.0 mm) D = M12 x 1.75 Ø G = 19.73 in. (501.1 mm)
Condition: New
Part Number: P1013035
Price: Ft739,368.35
ISO-F DN 630 Tapped M12 x 1.75 Weld-On Bulkhead Flange, For ISO-F Bolted or ISO-K Claw Clamp Style Flanges, Stainless Steel. These ISO-LF DN 630 weld-on, tapped M12 x 1.75, 304 stainless steel bulkhead flanges are designed to be welded directly to the side of a stainless steel vacuum chamber wall with a port cut out diameter equal to the inside diameter of the flange (see dimensions below). The flange is welded to the chamber on the inside port which makes a perfect vacuum seal. These bulkhead flanges have threaded through holes. Once the flange is welded to the chamber wall, the chamber wall becomes the thread bottom. So, the flange’s through holes become blind holes with a thread depth equal to the flange’s thickness. These flanges can be used with ISO-F bolted and ISO-K claw clamped flanges of the same ISO size. To connect ISO-K bolted flanges or fittings, use silver plated bulkhead bolts to prevent galling or seizing of the bolts and to make them easier to loosen, especially if they will be heated to bakeout temperatures (part number P1013041). To connect ISO-K type flanges or fittings, use single claw clamps (part number P1012718) with anti seize thread lubricant. Either connection type requires a centering ring with O-ring seal (part number P1012745). Bulkhead flanges offer the highest possible conductance by minimizing the port length which preserves maximum vacuum throughput and pumping speed. 3D CAD models are available in the download section. ISO-F 630 Bulkhead Flange Dimensions:Number of bolt holes = 16 Ø A = 29.53 in. (750.1 mm Ø B = 28.35 in. (720.1 mm) C = 0.945 in. (24.0 mm) D = M12 x 1.75 Ø G = 25.63 in. (651.0 mm)
Condition: New
Part Number: P1013036
Price: Ft1,045,538.46