Keyword Part Number:
Welch 2511 WOB-L Piston Pressure And Vacuum Pump, 21.3 in Hg, 219 Torr Vacuum, 11 LPM, 0.39CFM, 115 VAC Welch Vacuum Part Number 2511B-01 The Welch 2511 is a vacuum and pressure pump all-in-one and is perfect for many common laboratory vacuum applications. The 2511 produces an ultimate vacuum pressure of 219 Torr (21.3 inches of Hg), maximum positive pressure up to 33 PSIG, and has a 11 liters per minute (0.39 CFM) pumping speed. Applications Include: Filtration, Aspiration, Desiccation, Replace water aspirator and Vacuum Drying. The Welch 2511 WOB-L pressure and vacuum pump come with intake and discharge hose barbs which accept 1/4” ID rubber pressure and vacuum hose. Hose clamps should be used to hold the hose in place. For best results, we recommend the length of the tubing between the chamber and the pump be kept as small as possible. An Owners Manual in .PDF format is available for download to the side.
Condition: New
Part Number: P1011489
Price: Ft209,971.78
Welch 2522 WOB-L Piston Pressure And Vacuum Pump, Pressure to 100 PSI, Vacuum to 100 Torr, 22 LPM Pumping Speed, 115 VAC Welch Vacuum Part Number 2522B-01 The Welch 2522 is a vacuum and pressure pump all-in-one and are perfect for many common laboratory vacuum applications. The 2522 produces an ultimate vacuum pressure of 110 Torr (25.6 inches of Hg), maximum positive pressure up to 100 PSI, has a 22 liters per minute (0.76 CFM) pumping speed, and includes dial pressure gauges, regulators, and moisture traps on both the vacuum low pressure and positive pressure sides of the pump. The Welch 2522 WOB-L is a laboratory duty dry oil-free diaphragm vacuum and pressure pump all-in-one. It produces vacuum on the suction side and pressurizes those evacuated gases to positive pressure one the other side. The Welch 2522 includes both vacuum and positive pressure side regulators, dial gauges, and moisture traps. The two regulators and two gauges make it easy to meet your vacuum and pressure requirements. The vacuum regulator and vacuum dial gauge are attached to the intake port. The vacuum regulator allows the vacuum level to be set between roughly atmospheric pressure and the maximum vacuum allowed for the pump model. A moisture trap keeps water from accidentally being drawn into the unit. The pressure regulator and pressure dial gauges are attached to the discharge port. The pressure regulator allows discharge pressure to be set between atmospheric and the maximum possible for the pump model. Discharge air is filtered and noise is muffled with a filter. The Welch 2522 WOB-L pressure and vacuum pump come with intake and discharge hose barbs which accept 1/4” ID rubber pressure and vacuum hose. Hose clamps should be used to hold the hose in place. Since the vacuum side operates in the viscous flow regime, the small diameter of the hose will generate minimal conductance loss. For best results, we recommend the length of the tubing between the chamber and the pump be kept as small as possible. The Welch 2522 WOB-L pressure and vacuum pump come with dial gauges mounted on the regulator assemblies. The vacuum gauge gives negative pressure - that is pressure below atmospheric. The reference point for the vacuum gauge is atmospheric pressure. The pressure gauge gives pressure above atmospheric. The reference point for the pressure gauge is atmospheric pressure. Please keep in mind that atmospheric pressure tends to vary from day to day. As a result of this variability, the dial vacuum gauge will indicate slightly different maximum vacuum readings from day to day. The pumps will handle humid air and all wetted aluminum parts are treated for corrosion protection from moisture. All other wetted parts are stainless steel. A plastic trap with a ball check valve is attached to the regulator assembly to prevent water condensate from accidentally being ingested into the pump. If there is a chance liquid may be drawn from the process under evacuation, we recommend and additional liquid trap be placed between the process and the pump. A simple liquid trap is a filtering flask. When a heavy load of water vapor is evolved from the vacuum process, a cold trap is recommended to help prevent damage to the pump mechanism. A user's manual, brochure, and catalog sections in PDF format are available for downloaded below.
Condition: New
Part Number: P105864
Price: Ft348,609.79
Welch 2534 WOB-L Piston Pressure And Vacuum Pump, Pressure to 50 PSI, Vacuum to 95 Torr, 34 LPM Pumping Speed, 115 VAC Welch Vacuum Part Number 2534B-01 The Welch 2534 is a vacuum and pressure pump all-in-one is are perfect for many common laboratory vacuum applications. The 2534 produces an ultimate vacuum pressure of 95 Torr (26.2 inches of Hg), maximum positive pressure up to 50 PSI, has a 34 liters per minute (1.20 CFM) pumping speed, and includes dial pressure gauges, regulators, and moisture traps on both the vacuum low pressure and positive pressure sides of the pump. The Welch 2534 WOB-L is a laboratory duty dry oil-free diaphragm vacuum and pressure pump all-in-one. It produces vacuum on the suction side and pressurizes those evacuated gases to positive pressure one the other side. The Welch 2534 includes both vacuum and positive pressure side regulators, dial gauges, and moisture traps. The two regulators and two gauges make it easy to meet your vacuum and pressure requirements. The vacuum regulator and vacuum dial gauge are attached to the intake port. The vacuum regulator allows the vacuum level to be set between roughly atmospheric pressure and the maximum vacuum allowed for the pump model. A moisture trap keeps water from accidentally being drawn into the unit. The pressure regulator and pressure dial gauges are attached to the discharge port. The pressure regulator allows discharge pressure to be set between atmospheric and the maximum possible for the pump model. Discharge air is filtered and noise is muffled with a filter. The Welch 2534 WOB-L pressure and vacuum pump come with intake and discharge hose barbs which accept 1/4” ID rubber pressure and vacuum hose. Hose clamps should be used to hold the hose in place. Since the vacuum side operates in the viscous flow regime, the small diameter of the hose will generate minimal conductance loss. For best results, we recommend the length of the tubing between the chamber and the pump be kept as small as possible. The Welch 2534B-01 WOB-L pressure and vacuum pump come with dial gauges mounted on the regulator assemblies. The vacuum gauge gives negative pressure - that is pressure below atmospheric. The reference point for the vacuum gauge is atmospheric pressure. The pressure gauge gives pressure above atmospheric. The reference point for the pressure gauge is atmospheric pressure. Please keep in mind that atmospheric pressure tends to vary from day to day. As a result of this variability, the dial vacuum gauge will indicate slightly different maximum vacuum readings from day to day. The pumps will handle humid air and all wetted aluminum parts are treated for corrosion protection from moisture. All other wetted parts are stainless steel. A plastic trap with a ball check valve is attached to the regulator assembly to prevent water condensate from accidentally being ingested into the pump. If there is a chance liquid may be drawn from the process under evacuation, we recommend and additional liquid trap be placed between the process and the pump. A simple liquid trap is a filtering flask. When a heavy load of water vapor is evolved from the vacuum process, a cold trap is recommended to help prevent damage to the pump mechanism. A user's manual, brochure, and catalog sections in PDF format are available for downloaded below.
Condition: New
Part Number: P105865
Price: Ft384,228.96
Welch 2546 WOB-L Piston Pressure And Vacuum Pump, Pressure to 100 PSI, Vacuum to 60 Torr, 45 LPM Pumping Speed, 115 VAC Welch Vacuum Part Number 2546B-01 The Welch 2546 is a vacuum and pressure pump all-in-one and is perfect for many common laboratory vacuum applications. The 2546 produces an ultimate vacuum pressure of 60 Torr (27.6 inches of Hg), maximum positive pressure up to 50 PSI, has a 45 liters per minute (1.6CFM) pumping speed, and includes dial pressure gauges, regulators, and moisture traps on both the vacuum low pressure and positive pressure sides of the pump. The Welch 2546 WOB-L is a laboratory duty dry oil-free diaphragm vacuum and pressure pump all-in-one. It produces vacuum on the suction side and pressurizes those evacuated gases to positive pressure one the other side. The Welch 2546 includes both vacuum and positive pressure side regulators, dial gauges, and moisture traps. The two regulators and two gauges make it easy to meet your vacuum and pressure requirements. The vacuum regulator and vacuum dial gauge are attached to the intake port. The vacuum regulator allows the vacuum level to be set between roughly atmospheric pressure and the maximum vacuum allowed for the pump model. A moisture trap keeps water from accidentally being drawn into the unit. The pressure regulator and pressure dial gauges are attached to the discharge port. The pressure regulator allows discharge pressure to be set between atmospheric and the maximum possible for the pump model. Discharge air is filtered and noise is muffled with a filter. The Welch 2546 WOB-L pressure and vacuum pump come with intake and discharge hose barbs which accept 1/4” ID rubber pressure and vacuum hose. Hose clamps should be used to hold the hose in place. Since the vacuum side operates in the viscous flow regime, the small diameter of the hose will generate minimal conductance loss. For best results, we recommend the length of the tubing between the chamber and the pump be kept as small as possible. The Welch 2546B-01 WOB-L pressure and vacuum pump come with dial gauges mounted on the regulator assemblies. The vacuum gauge gives negative pressure - that is pressure below atmospheric. The reference point for the vacuum gauge is atmospheric pressure. The pressure gauge gives pressure above atmospheric. The reference point for the pressure gauge is atmospheric pressure. Please keep in mind that atmospheric pressure tends to vary from day to day. As a result of this variability, the dial vacuum gauge will indicate slightly different maximum vacuum readings from day to day. The pumps will handle humid air and all wetted aluminum parts are treated for corrosion protection from moisture. All other wetted parts are stainless steel. A plastic trap with a ball check valve is attached to the regulator assembly to prevent water condensate from accidentally being ingested into the pump. If there is a chance liquid may be drawn from the process under evacuation, we recommend and additional liquid trap be placed between the process and the pump. A simple liquid trap is a filtering flask. When a heavy load of water vapor is evolved from the vacuum process, a cold trap is recommended to help prevent damage to the pump mechanism. A user's manual, brochure, and catalog sections in PDF format are available for downloaded below.
Condition: New
Part Number: P108865
Price: Ft425,627.37
Welch 2561B-50 WOB-L Laboratory Duty Dry Oil-Free Piston Vacuum Pump, 2.3 CFM, 5 torr Ultimate Pressure, 115V 60Hz. Welch Vacuum Part Number 2561B-50 These Welch 2561B-50 laboratory duty dry oil-free dual stage piston vacuum pumps are perfect for many common laboratory vacuum applications. The 2516-50 produces and ultimate vacuum pressure of 5 Torr (29.8 inches of Hg) and includes a vacuum regulator with a built in vacuum gauge which is simple to adjust & monitor the vacuum level. The 2561B-50 WOB-L pump includes an inlet water trap with float ball that rises to seal off the vacuum pump in case of accidental ingestion of water and a muffler which quiets the pump and filters discharge air. These Welch 2561B-50 WOB-L piston pumps operate on 1-Phase 110 to 120 VAC at 50/60 Hz and are designed for use with dry or aqueous vapor applications only. A user's instruction manual in PDF format is available for downloaded below.
Condition: New
Part Number: P105861
Price: Ft813,087.04
Welch 2562 WOB-L Laboratory Duty Dry Oil-Free Piston Vacuum Pump, 2.3 CFM, 7.5 torr Ultimate Pressure, 115V 60Hz. Welch Vacuum Part Number 2562B-01 These Welch 2562B-01 laboratory duty dry oil-free piston vacuum pumps are perfect for many common laboratory vacuum applications. The 2562B-01 produces and ultimate vacuum pressure of 7.5 Torr (29.6 inches of Hg) but do NOT include a vacuum regulator, pressure gauge, or water vapor trap. These Welch 2562B-01 WOB-L piston pumps operate on 1-Phase 110 to 120 VAC at 50/60 Hz and are designed for use with dry applications only. A user's instruction manual in PDF format is available for downloaded below.
Condition: New
Part Number: P105862
Price: Ft648,970.92
Welch 2581B-50 2581 WOB-L Laboratory Dry Oil-Free Piston Vacuum Pump, 100 LPM, 5 torr, 115 VAC Welch Vacuum Part Number 2581B-50 These Welch 2581B-50 laboratory duty dry oil-free dual stage diaphragm vacuum pumps are perfect for many common laboratory vacuum applications. The 2581B-50 produces and ultimate vacuum pressure of 5 Torr 29.8 inches of Hg and includes a vacuum regulator with a built in vacuum gauge which is simple to adjust & monitor the vacuum level. The 2581B-50 pump includes an inlet water trap with float ball that rises to seal off the vacuum pump in case of accidental ingestion of water and a muffler which quiets the pump and filters discharge air. These Welch 2581B-50 piston pumps operate on 1-Phase 110 to 120 VAC at 50/60 Hz and are designed for use with dry or aqueous vapor applications only. A user's instruction manual in PDF format is available for downloaded below.
Condition: New
Part Number: P107419
Price: Ft1,112,370.09
Welch 2585B WOB-L Laboratory Dry Oil-Free Piston Vacuum Pump, 201 LPM, 60 torr, 115 VAC Welch Vacuum Part Number 2585B-50 These Welch 2585B-50 laboratory duty dry oil-free dual stage diaphragm vacuum pumps are perfect for many common laboratory vacuum applications. The 2585B-50 produces and ultimate vacuum pressure of 60 Torr 27.6 inches of Hg and includes a vacuum regulator with a built in vacuum gauge which is simple to adjust & monitor the vacuum level. The 2585B-50 WOB-L pump includes an inlet water trap with float ball that rises to seal off the vacuum pump in case of accidental ingestion of water and a muffler which quiets the pump and filters discharge air. These Welch 2585B-50 WOB-L piston pumps operate on 1-Phase 110 to 120 VAC at 50/60 Hz and are designed for use with dry or aqueous vapor applications only. A user's instruction manual in PDF format is available for downloaded below.
Condition: New
Part Number: P105904
Price: Ft915,487.30
OEM Welch 2522 Standard Duty Dry Vacuum Pump Major Rebuild Kit for Welch 2522B-01 WOB-L pumps. Welch OEM PN 2522K-03 This is a one head major service rebuild kit for the 2522B-01 WOB-L Welch Diaphragm Pumps. These are OEM Genuine Welch Parts.
Condition: New
Part Number: P107529
Price: Ft148,156.95
Welch Two-Head Rebuild Kit for Welch Standard Duty Dry Vacuum Pumps, PN: 2563K-03 This is a two-head service rebuild kit for the 2561 and 2563 Welch standard duty dry piston pumps. These are OEM Genuine Welch Parts.
Condition: New
Part Number: P108851
Price: Ft191,630.23
New Welch Vacuum Exhaust Silencer for Welch 2561 Pump (Sold Seperately) New Welch Vacuum Exhaust Silencer for Welch 2561 Pump (Sold Seperately)
Condition: New
Part Number: P1010089
Price: Ft47,668.96
New Welch Vacuum Regulator with Inlet Separator Jar 2565K-50 The 2565K-50 includes an inlet trap to help prevent ingestion of fluids into the pump, a dial gauge for continuous vacuum level monitoring and a regulator bleed valve to adjust vacuum levels. It has a 3/8 I.D. hose barb connection, and a 1/4 NPT male mount. FITS on Welch Pumps 2560, 2561, 2562, 2563, 2565, 2567.
Condition: New
Part Number: P1011038
Price: Ft168,711.23