Welch Vacuum MPC 101Z PTFE Dry Pump 6 Torr, 18 L/min, CE, 115 V, 50/60 Hz 1Ph, Dry Diaphragm Pumps , Dry Diaphragm Pumps ,  PN  412522-01

These Welch Vacuum MPC 101Z PTFE Dry Pump 6 Torr, 18 L/min, CE, 115 V, 50/60 Hz 1Ph  have part number 412522-01, are new, and come with full Welch Vacuum warranty. MPC Diaphragm Vacuum Pumps are Chemical resistant and oil free. MPC models use PTFE and other flourinated plastics for the wetted parts to allow agressive acids and vapors to be pumped. All two-stage and three-stage MPC pumps come standard wtih gas a ballast valve. Model MPC 302 Z uses a patented pump head design to significantly improve performance. Optimized construction of the pump heads allows the MPC 302 Z to achieve a 17% higher pumping speed in the application critical vacuum range compared to similar products. Besides the pumping speed the ultimate vacuum pressure is improved as well to 5 mbar(3.8 torr). MPC Pumps are used for the following applications: Rotary Evaporation, Vacuum Filtration, Vacuum Oven, Desiccator, Aspiration, Gel Dryer, Concentrator, Distillation. MP Diaphragm Vacuum Pumps are standard duty and oil free. MP models use aluminum pump heads suitable for pumping non-reactive gases/vapors such as air, noble gases and water vapor. PTFE diaphragms are used because they offer longer lifetime than conventional elastomer diaphragms. The diaphragms consist of a PTFE membrane sandwiched to a strong non-wetted backing. PEEK valves are used due to their excellent resistance to chemical attack and are extremely hard wearing when compared to elastomer valves. Connectors are made from PA with PTFE tubing. Exhaust silencers are included with MP pumps. The MP pumps are used for Vacuum Filtration and Desiccator.

More information about these Welch Vacuum MPC 101Z PTFE Dry Pump 6 Torr, 18 L/min, CE, 115 V, 50/60 Hz 1Ph  can be found by downloading the pdf catalog and documents below. Simply open the pdf catalog below, run the pdf search (ctrl F) and search for the 412522-01.