Welch 1399, 1400, 8905, 8890, 8890A, Mist Exhaust Filter with Inlet 3/4 - 20 Fine Thread For Vacuum Pumps up to 4 CFM This Compact Oil Mist Filter comes with Filter Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Steel construction with Nickel plated finish. Seamless drawn housings and no welds to rust or vibrate apart. Comes with filter media that's easy to replace with a thumbscrew. Fits Welch Outlet Ports on 1399, 1400, 8905, 8890, 8890A Rotary Vane DirecTorr GEM Vacuum Pumps. Common Dimensions & Specifications: Use with Vacuum Pumps Up to 4 CFM. Approx. weight of filter and media 1 lbs. Inlet 3/4-20 Fine, A= 3-1/4, B= 1, C= 2-1/2

Welch Replacement Filter Media for Cannister Filter for 1399,1400, 8905, 8890, 8890A Pumps with Inlet 3/4 - 20 Fine Thread For Pumps up to 4 CFM This the Filter Replacement Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Fits Welch Cannister Filters on 1399, 1400, 8905, 8890, 8890A Rotary Vane Vaccum Pumps.

Compact Oil Mist Exhaust Filter with Inlet KF16 For Vacuum Pumps up to 5 CFM This Compact Oil Mist Exhaust Filter comes with Filter Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Steel construction with Nickel plated finish. Seamless drawn housings and no welds to rust or vibrate apart. Comes with filter media that's easy to replace with a thumbscrew. Fits: Alcatel 2002A Pumps With KF-16 or NW-16 Exhaust Flange! Edwards E2M0.7, E2M1, E2M1.5 Pump with KF-16 NW-16 Exhaust Flanges! Leybold D2A, D4A, D1.6B, D4B, and D8B With KF-16 or NW16 Exhaust Flanges! Or any rotary vane vacuum pump with KF16 or NW16 outlet up to 5 CFM. Common Dimensions & Specifications: Use with Vacuum Pumps Up to 5 CFM. Approx. weight of filter and media 1 lbs. Inlet KF16, A= 4-1/2, B= 7/8, C= 2-1/2

Replacement Filter For Oil Mist Filter Systems Part No. P101877 & P101879 This is a Replacement Filter For Oil Mist Filter Systems Part No. P101877 & P101879. Common Dimensions & Specifications: Approx. weight 8 oz., Height= 3 inches, Diameter= 2-1/4 inches.

Compact Oil Mist Exhaust Filter with Inlet KF25 For Vacuum Pumps up to 24 CFM This Compact Oil Mist Exhaust Filter comes with Filter Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Steel construction with Nickel plated finish. Seamless drawn housings and no welds to rust or vibrate apart. Comes with filter media that's easy to replace with a thumbscrew. Fits: Alcatel 2004A, 2008A, 2012A, 2020A, 2005SD, 2010SD, 2015Sd, 2021SD and others. Edwards E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, E2M28, E2M30, RV3, RV5, RV8, RV12, XDS-5, XDS-10, and others. Labconco E2M5, E2M8, 117, & 195. Leybold D8A, D16A, D16B, D25B, and others Pfeiffer Savant VP100, VP190, VLP80, VLP120, VLP190, & VLP285 Or any rotary vane vacuum pump with KF25 outlet up to 24 CFM. Common Dimensions & Specifications: Use with Vacuum Pumps Up to 24 CFM. Approx. weight of filter and media 3.5 lbs. Inlet KF25, A= 9-1/4, B= 2-1/8, C= 5-1/8

Filter Replacement for Exhaust Oil Mist Filter Systems Part No P101876 & P101878 This Filter Replacement for Exhaust Oil Mist Filter Systems Part No P101876 & P101878. Common Dimensions & Specifications: Approx. weight 12 oz., Height= 6 inches, Diameter= 4 inches.

Compact Oil Mist Exhaust Filter with Inlet 1-20 Fine up to 5 CFM for Welch & Fisher Vacuum Pumps This Compact Oil Mist Filter comes with Filter Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Steel construction with Nickel plated finish. Seamless drawn housings and no welds to rust or vibrate apart. Comes with filter media that's easy to replace with a thumbscrew. Fits Welch Pumps 8907, 8912, 8915, 1405. Fits Fisher Pumps M4C, M6C. Common Dimensions & Specifications: Use with Vacuum Pumps Up to 5 CFM. Approx. weight of filter and media 1 lbs. Inlet 1-20 Fine, A= 3-7/8, B= 7/8, C= 2-1/2

Compact Oil Mist Exhaust Filter with Inlet 1 inch-20 Fine up to 24 CFM for Welch & Fisher Vacuum Pumps This Compact Oil Mist Exhaust Filter comes with Filter Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Steel construction with Nickel plated finish. Seamless drawn housings and no welds to rust or vibrate apart. Comes with filter media that's easy to replace with a thumbscrew. Part No. for this filter with media is EF-FG10-103. Fits Welch Vacuum Pumps 8907, 8912, 8915, 8917, 8920, 8925, 1373, 1376, 1380, 1402, 1405. Fisher Vacuum Pumps M4C, M6C, M8C, M12C, M16C. Common Dimensions & Specifications: Use with Vacuum Pumps Up to 24 CFM. Approx. weight of filter and media 7 lbs. Inlet 1-20 Fine, A= 8, B= 7/8, C= 5-1/8

Replacement Filter Paper Element For Oil Mist Filters Up to 4 CFM Dimensions 1.25 X 2.25 X 2.13 This is a Replacement Filter Paper Element for Oil Mist Filters up to 4 CFM dimension below. Common Dimensions: Approx. weight 1 lb., ID= 1.25 OD=2.25 Height= 2.13

Compact Oil Mist Exhaust Filter with Drain Back Fits Welch & Fisher Pumps inlet 1-20 & up to 16 CFM This Compact Oil Mist Exhaust Filter comes with Filter Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Comes with auto drain back design for recycling of oil mist. The internal drain returns oil back into the pump, prevents oil blow back with auto sealing and with an enclosed housing allows for a clean environment. Steel construction with Nickel plated finish. Seamless drawn housings and no welds to rust or vibrate apart. Comes with filter media that's easy to replace with a thumbscrew. Fits Welch Vacuum Pumps 8907, 8912, 8915, 8917, 8920, 8925, 1373, 1376, 1380, 1402, 1405. Fisher Vacuum Pumps M4C, M6C, M8C, M12C, M16C. Common Dimensions & Specifications: Use with Vacuum Pumps Up to 16 CFM. Approx. weight of filter and media 2.3 lbs. Inlet 1-20 Fine, A= 7-1/8, B= 7/8, C= 5-1/8

Filter Media Replacement Only, Used on Mist Filter Assemblies Part Numbers P101874 and P102028 on This Website.This is a replacement filter for mist filter on assemblies P101874 and P102028. About the oil mist eliminator exhaust filter assemblies: The compact oil mist eliminator exhaust filters come with the internal filter media installed and are used to capture oil fog, mist, or smoke from the exhaust of oil vacuum pumps. These exhaust filters are air tight to prevent the vacuum pump exhaust vapors from leaking into your laboratory. They have KF25 (NW25) ports for easy connection between your vacuum pump and exhaust line. These oil mist exhaust eliminator filters are made of chrome plated steel construction to prevent rusting and has internal oil drain-back to return the captured oil back in to the vacuum pump. Each comes with an installed filter media that''s easy to replace with a thumbscrew. Filter Media Replacement Common Dimensions & Specifications:Approx. weight 8 oz.Height= 3-7/8 inchesDiameter= 4 inches.

Filter Element Replacement for Welch Pumps 1376, 1380, 1402, 8806,8811,8814, PN- 1417G 0.3 micron particle size. Fits Welch Exhaust Mist Oil Filter P/N 1417P-10 or any other cannister with like dimensions. Common Dimensions & Specifications of Element: Approx. weight 6 oz., Height= 4 inches, Diameter= 3 inches.

Compact Oil Mist Exhaust Filter with Drain Back for Welch Vacuum Pumps. Inlet 1-3/4-20 Fine This Compact Oil Mist Exhaust Filter comes with Filter Media and captures oil fog, mist or smoke from exhaust of oil flooded vacuum pumps. Comes with auto drain back design for recycling of oil mist. The internal drain returns oil back into the pump, prevents oil blow back with auto sealing and with an enclosed housing allows for a clean environment. Steel construction with Nickel plated finish. Seamless drawn housings and no welds to rust or vibrate apart. Comes with filter media that's easy to replace with a thumbscrew. Fits Welch Belt Drive pumps 1397 and 1374. Common Dimensions & Specifications: Use with Vacuum Pumps Up to 24 CFM. Approx. weight of filter and media 2.5 lbs. Inlet 1-3/4-20 Fine, A= 9-5/8, B= 2, C= 6-1/4

Filter Replacement for Part No. P101875 Oil Mist Filter With Drain Back For Welch 1374 & 1397 This is a Filter Replacement for Part No. P101875 Oil Mist Filter With Drain Back For Welch 1374 & 1397 Common Dimensions & Specifications: Approx. weight 10 oz., Height= 4-1/8 inches, Diameter= 5 inches.

Replacement Filter Paper Element For Oil Mist Filters Up to 7 CFM Dimensions 1.25 X 2.25 X 4.00 This is a Replacement Filter Paper Element for Oil Mist Filters up to 7 CFM dimension below. Common Dimensions: Approx. weight 1 lb., ID= 1.25 OD=2.25 Height= 4.00

Compact Oil Mist Eliminator Exhaust Filter, KF16 Inlet & Exhaust Ports, up to 10 CFM These compact oil mist eliminator exhaust filters come with the internal filter media installed and are used to capture oil fog, mist, or smoke from the exhaust of oil vacuum pumps. These exhaust filters are air tight to prevent the vacuum pump exhaust vapors from leaking into your laboratory. They have KF16 (NW16) ports for easy connection between your vacuum pump and exhaust line. These filters also have an internal back pressure valve designed to release the element at 7.35 PSI differential pressure for pump safety. They come with a 1/8 NPT oil drain port and are made of steel construction with a white painted finish. These compact oil mist eliminator exhaust filters are designed with seamless drawn housings and no welds to rust or vibrate apart. Each comes with an installed filter media that's easy to replace with a thumbscrew. Fits: Alcatel 2002A Pumps With KF-16 or NW-16 Exhaust Flange. Edwards E2M0.7, E2M1, E2M1.5 Pump with KF-16 NW-16 Exhaust Flanges. Leybold D2A, D4A, D1.6B, D4B, and D8B With KF-16 or NW16 Exhaust Flanges. Welch 1400, 1399, & 1405 With KF-16 or NW16 Exhaust Fittings. Or any rotary vane vacuum pump with KF16 or NW16 outlet up to 10 CFM. Common Dimensions & Specifications: Capacity: Up to 10 CFM Weight: ~ 1 lbs Inlet: KF16 or NW16 Exhaust: KF16 or NW 16 Dimensions: A= 4-5/16, B= 7/8, C= 3-1/4, D= 7/8

Compact Oil Mist Eliminator Exhaust Filter, KF25 Inlet & Exhaust Ports, up to 10 CFM These compact oil mist eliminator exhaust filters come with the internal filter media installed and are used to capture oil fog, mist, or smoke from the exhaust of oil vacuum pumps. These exhaust filters are air tight to prevent the vacuum pump exhaust vapors from leaking into your laboratory. They have KF25 (NW25) ports for easy connection between your vacuum pump and exhaust line. These filters also have an internal back pressure valve designed to release the element at 7.35 PSI differential pressure for pump safety. They come with a 1/8 NPT oil drain port and are made of steel construction with a white painted finish. These compact oil mist eliminator exhaust filters are designed with seamless drawn housings and no welds to rust or vibrate apart. Each comes with an installed filter media that's easy to replace with a thumbscrew. Fits: Alcatel 2004, 2005, 2008, 2010, & 2012 Pumps With KF-25 or NW-25 Exhaust Flange. Edwards E2M2, E2M5, E2M8, E2M12, RV3, RV5, RV8, RV12 Pumps with KF-25 NW-25 Exhaust Flanges. Labconco E2M5, E2M8, 117, 195 with KF-25 or NW25 Exhaust Flanges. Leybold D8A with KF-25 or NW25 Exhaust Flanges. Savant VP100, VP190, VLP80, VLP120, VLP190, VLP285 with KF-25 or NW25 Exhaust Flanges. Varian SD90, SD200, SD300, SD91, SD201, SD301, DS102, DS202, DS302 with KF-25 or NW25 Exhaust Flanges. Welch 8907, 8910, 8912, 8917, 8920, 8925, 1402, 1380, with KF-25 or NW25 Exhaust Flanges. Or any rotary vane vacuum pump with KF25 or NW25 outlet up to 10 CFM. Common Dimensions & Specifications: Capacity: Up to 10 CFM Weight: ~ 1 lbs Inlet: KF25 or NW25 Exhaust: KF25 or NW25 Dimensions: A= 4-5/16, B= 7/8, C= 3-1/4, D= 7/8

Filter Replacement for Exhaust Oil Mist Filter Systems Part No P102027 and P102026 This is a Filter Replacement for Exhaust Oil Mist Filter Systems Part No P102027 and P102026. Common Dimensions & Specifications: Approx. weight 12 oz., Height= 2.5 inches, Diameter= 2.25 inches.

Compact Oil Mist Eliminator Exhaust Filter, KF25 Inlet & Exhaust Ports, up to 16 CFM These compact oil mist eliminator exhaust filters come with the internal filter media installed and are used to capture oil fog, mist, or smoke from the exhaust of oil vacuum pumps. These exhaust filters are air tight to prevent the vacuum pump exhaust vapors from leaking into your laboratory. They have KF25 (NW25) ports for easy connection between your vacuum pump and exhaust line. These oil mist exhaust eliminator filters are made of chrome plated steel construction to prevent rusting and has internal oil drain-back to return the captured oil back in to the vacuum pump. Each comes with an installed filter media that's easy to replace with a thumbscrew. Fits: Alcatel 2004, 2005, 2008, 2010, 2012, 2015, 2020, & 2021 Vacuum Pumps With KF-25 or NW-25 Exhaust Flange. Edwards E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, RV3, RV5, RV8, RV12 Pumps with KF-25 NW-25 Exhaust Flanges. Labconco E2M5, E2M8, 117, 195 with KF-25 or NW25 Exhaust Flanges. Leybold D8A, D16A, D16B with KF-25 or NW25 Exhaust Flanges. Savant VP100, VP190, VLP80, VLP120, VLP190, VLP285 with KF-25 or NW25 Exhaust Flanges. Varian SD90, SD200, SD300, SD450, SD91, SD201, SD301, SD451, DS102, DS202, DS302, DS402 with KF-25 or NW25 Exhaust Flanges. Welch 8907, 8910, 8912, 8917, 8920, 8925, 1402, 1376, 1380, with KF-25 or NW25 Exhaust Flanges. Or any rotary vane vacuum pump with KF25 or NW25 outlet up to 16 CFM. Common Dimensions & Specifications: Capacity: Up to 16 CFM Weight: ~ 1 lbs Inlet: KF25 or NW25 Exhaust: KF25 or NW25 Dimensions: A= 8-3/8, B= 2-1/8, C= 5-1/8

Compact Oil Mist Eliminator Exhaust Filter, KF25 Inlet & Exhaust Ports, up to 20 CFM These compact oil mist eliminator exhaust filters come with the internal filter media installed and are used to capture oil fog, mist, or smoke from the exhaust of oil vacuum pumps. These exhaust filters are air tight to prevent the vacuum pump exhaust vapors from leaking into your laboratory. They have KF25 (NW25) ports for easy connection between your vacuum pump and exhaust line. These filters also have an internal back pressure valve designed to release the element at 7.35 PSI differential pressure for pump safety. They come with a 1/8 NPT oil drain port and are made of steel construction with a white painted finish. These compact oil mist eliminator exhaust filters are designed with seamless drawn housings and no welds to rust or vibrate apart. Each comes with an installed filter media that's easy to replace with a thumbscrew. Fits: Alcatel 2004, 2005, 2008, 2010, 2012, 2015, 2020, & 2021 Vacuum Pumps With KF-25 or NW-25 Exhaust Flange. Edwards E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, E2M28, E2M30, RV3, RV5, RV8, RV12 Pumps with KF-25 NW-25 Exhaust Flanges. Labconco E2M5, E2M8, 117, 195 with KF-25 or NW25 Exhaust Flanges. Leybold D8A, D16A, D16B, D25B, with KF-25 or NW25 Exhaust Flanges. Savant VP100, VP190, VLP80, VLP120, VLP190, VLP285 with KF-25 or NW25 Exhaust Flanges. Varian SD90, SD200, SD300, SD450, SD91, SD201, SD301, SD451, DS102, DS202, DS302, DS402 with KF-25 or NW25 Exhaust Flanges. Welch 8907, 8910, 8912, 8917, 8920, 8925, 1402, 1376, 1380, 1397, with KF-25 or NW25 Exhaust Flanges. Or any rotary vane vacuum pump with KF25 or NW25 outlet up to 20 CFM. Common Dimensions & Specifications: Capacity: Up to 16 CFM Weight: ~ 1 lbs Inlet: KF25 or NW25 Exhaust: KF25 or NW25 Dimensions: A= 7-3/8, B= 7/8, C= 5-1/4, D= 7/8

Filter Replacement for Exhaust Oil Mist Filter System Part No P102029 This is a Filter Replacement for Exhaust Oil Mist Filter System Part No P102029. Common Dimensions & Specifications: Approx. weight 12 oz., Height= 5 inches, Diameter= 3 inches.