Agilent Varian FRG-720 KF25 Pirani and Bayard Alpert B/A Sensor Combination Gauge. Single Filament. Hot Cathode Ion, 760 to 3.8 X 10-10 Torr. Agilent Varian PN FRG720KF25. This Agilent Varian Gauge is a Pirani and Bayard Alpert combination gauge, hot cathode ionization design single filament and can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. They have a KF-25 vacuum flange fitting. This is the FRG-720 gauge only, No set points, No display, No Profibus. User replaceable sensors, signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG720KF25. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with Agilent Varian Pressure Gauge Controllers: XGS-600 Multi-gauge Controller Active Gauge Controllers AGC-100, AGD-100

Agilent Varian FRG-720 Pirani and Bayard Alpert B/A Sensor Combination Gauge with LED Display. Single Filament, Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, CF35 CF 2.75 in. Conflat Flange. Agilent Varian PN FRG720CF35D. This Agilent Varian Hot Cathode Ion Gauge is a Pirani and Bayard Alpert combination gauge with LED Display. It contains a long life yttrium oxide coated iridium Single Filament and can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. They have a CF35 CF 2.75 inch Conflat vacuum flange fitting. This is the FRG-720 gauge only, No set points, No Profibus. User replaceable sensors, signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG720CF35D. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with Agilent Varian Pressure Gauge Controllers: XGS-600 Multi-gauge Controller Active Gauge Controllers AGC-100, AGD-100

Agilent Varian FRG-720 Pirani and Bayard Alpert B/A Sensor Combination Gauge with Profibus Connector and Set Points. Single Filament. Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, CF35 CF 2.75 in. Conflat Flange. Agilent Varian PN FRG720CF35SP. This Agilent Varian Gauge is a Pirani and Bayard Alpert combination gauge with Profibus and Set Points. It is a hot cathode ionization design and contains a long life yttrium oxide coated iridium Single Filament and can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. They have a CF35 CF 2.75 inch Conflat vacuum flange fitting. This is the FRG-720 gauge only, No Display User replaceable sensors, signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG720CF35SP. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with Agilent Varian Pressure Gauge Controllers: XGS-600 Multi-gauge Controller Active Gauge Controllers AGC-100, AGD-100

Agilent Varian FRG-730 KF25 Pirani and Bayard Alpert B/A Sensor Combination Gauge With DUAL Filament, Set Points. Hot Cathode Ion, Pressure Range 760 to 3.8 X 10-10 Torr, KF25, Agilent Varian PN FRG730KF25S. This Agilent Varian Gauge is a Pirani and Bayard Alpert combination gauge, hot cathode ionization design. It contains a long life yttrium oxide coated iridium DUAL filament with Set Points. The gauge can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. They have a KF-25 vacuum flange fitting. This is the FRG-730 gauge only, No LCD Display, No Profibus. User replaceable sensors, signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG730KF25S. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with Agilent Varian Pressure Gauge Controllers: XGS-600 Multi-gauge Controller Active Gauge Controllers AGC-100, AGD-100

Agilent Varian FRG-730 Pirani and Bayard Alpert B/A Sensor Combination Gauge with Set Points. DUAL Filament, Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, CF35 CF 2.75 in. Conflat Flange. Agilent Varian PN FRG730CF35S. This Agilent Varian Gauge is a Pirani and Bayard Alpert combination gauge, with set points. It has a hot cathode ionization design and contains a long life yttrium oxide coated iridium DUAL Filament. The gauge can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. They have a CF35 CF 2.75 inch Conflat vacuum flange fitting. This is the FRG-730 gauge only, No display, No Profibus. User replaceable sensors, signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG730CF35S. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with Agilent Varian Pressure Gauge Controllers: XGS-600 Multi-gauge Controller Active Gauge Controllers AGC-100, AGD-100

Agilent Varian FRG-730 Pirani and Bayard Alpert B/A Sensor Combination Gauge with Set Points and LED Display. DUAL Filament, Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, CF35 CF 2.75 in. Conflat Flange. Agilent Varian PN FRG730CF35SD. This Agilent Varian Gauge is a Pirani and Bayard Alpert combination gauge, hot cathode ionization design with set points and LED display. It contains a long life yttrium oxide coated iridium DUAL Filament. The gauge can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. They have a CF35 CF 2.75 inch Conflat vacuum flange fitting. This is the FRG-730 gauge only, No Profibus. User replaceable sensors, signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG730CF35SD. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with Agilent Varian Pressure Gauge Controllers: XGS-600 Multi-gauge Controller Active Gauge Controllers AGC-100, AGD-100

Agilent Varian FRG-730 Pirani and Bayard Alpert B/A Sensor Combination Gauge with Set Points and Profibus Connector. DUAL Filament, Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, CF35 CF 2.75 in. Conflat Flange. Agilent Varian PN FRG730CF35SP. This Agilent Varian Gauge is a Pirani and Bayard Alpert combination gauge, hot cathode ionization design with set points and Profibus. It contains a long life yttrium oxide coated iridium DUAL Filament The gauge can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. They have a CF35 CF 2.75 inch Conflat vacuum flange fitting. This is the FRG-730 gauge only, No Display User replaceable sensors, signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG730CF35P. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with Agilent Varian Pressure Gauge Controllers: XGS-600 Multi-gauge Controller Active Gauge Controllers AGC-100, AGD-100

Agilent Varian FRG-720 Pirani and Bayard Alpert SINGLE Filament Replacement Sensor. Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, NW25 KF25 Flange. Agilent Varian PN FRG720KF25RS. This Agilent Varian Single Filament Replacement Sensor is for the FRG720 Bayard Alpert and Pirani Combination Gauge with a NW25 KF25 Flange. This filament sensor is replaceable by the user. The gauge can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. This is the replaceable single filament sensor with the NW25 KF25 flange. This replacement sensor is for the FRG720 combination gauges only. Signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG720KF25RS. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with FRG720 Single Filament Combination Gauge Part Numbers: FRG720KF25 FRG720KF25D FRG720KF25SP

Agilent Varian FRG-720 Pirani and Bayard Alpert SINGLE Filament Replacement Sensor. Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, CF35 CF 2.75 in. Flange. Agilent Varian PN FRG720CF35RS. This Agilent Varian Single Filament Replacement Sensor is for the FRG720 Bayard Alpert and Pirani Combination Gauge with a CF35 CF 2.75 in. Flange. This filament sensor is replaceable by the user. The gauge can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. This is the replaceable single filament sensor with the CF35 CF 2.75 in. flange. This replacement sensor is for the FRG720 combination gauges only. Signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG720CF35RS. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with FRG720 Single Filament Combination Gauge Part Numbers: FRG720CF35 FRG720CF35D FRG720CF35SP

Agilent Varian FRG-730 Pirani and Bayard Alpert DUAL Filament Replacement Sensor. Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, NW25 KF25 Flange. Agilent Varian PN FRG730KF25RS. This Agilent Varian DUAL Filament Replacement Sensor is for the FRG730 Bayard Alpert and Pirani Combination Gauge with a NW25 KF25 Flange. This filament sensor is replaceable by the user. The gauge can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. This is the replaceable DUAL filament sensor with the NW25 KF25 flange. This replacement sensor is for the FRG730 combination gauges only. Signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG730KF25RS. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with FRG730 DUAL Filament Combination Gauge Part Numbers: FRG730KF25S FRG730KF25SD FRG730KF25SP

Agilent Varian FRG-730 Pirani and Bayard Alpert DUAL Filament Replacement Sensor. Hot Cathode Ion, 760 to 3.8 X 10-10 Torr, CF35 CF 2.75 inch Conflat Flange. Agilent Varian PN FRG730CF35RS. This Agilent Varian DUAL Filament Replacement Sensor is for the FRG730 Bayard Alpert and Pirani Combination Gauge with a CF35 CF 2.75 inch Flange. This filament sensor is replaceable by the user. The gauge can measure pressure from 3.8 X 10-10 Torr to atmosphere. Over the whole measuring range, the gauge has a continuous characteristic curve and its measuring signal is output as logarithm of the pressure. The gauge functions with a Bayard-Alpert hot cathode ionization measurement system (for < 2.0×10-2 Torr) and a Pirani measurement system (for >5.5×10-3 Torr). In the overlapping pressure range of 2.0×10-2 to 5.5×10-3 Torr, a mixed signal of the two measurement systems is output. The hot cathode is switched on by the Pirani measurement system only below the switching threshold of 2.4×10-2 Torr (to prevent filament burnout). It is switched off when the pressure exceeds 3.2×10-2 Torr. This is the replaceable DUAL filament sensor with the CF35 CF 2.75 inch flange. This replacement sensor is for the FRG730 combination gauges only. Signal cables and pressure controllers sold separately on this website. Agilent Varian Part Number FRG730CF35RS. A complete Operating Instruction Manual and Spec Sheet is available for download in .pdf format below under AVAILABLE DOWNLOADS. Compatible with FRG730 DUAL Filament Combination Gauge Part Numbers: FRG730CF35S FRG730CF35SD FRG730CF35SP