MKS Type 246 246C SingleChannel Mass Flow Controller Power Supply Readout. MKS Part Number 246C. The MKS Type 246 246C Power Supplies/Readouts are designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 246 246C is a single channel single readout unit. Compatible with mass flow controllers and mass flow readouts 179, 180, 579, 1179, 1479, 1480, 1559, 1579, 2179, M10M, M100. Signal cables for the MKS 246 246C are available on this website. For Specifications on this MKS 246 246C See AVAILABLE DOWNLOADS Below.

MKS 1179C Mass Flow Electronic Absolute Pressure Controller, 50 sccm N2 Equivalent, 15 Pin, Swagelok 4 VCR. MKS Instruments Part Number: 1179C00151CR1BV. The MKS 1179C is an all-metal mass flow controller designed to measure the flow of gases in a wide variety of applications. Input and output connections are Swagelok® 4 VCR® The MKS 1179C mass flow controllers are available with full scales from 10 sccm to 20 slm, providing fast, repeatable flow metering to as low as 0.1 sccm.The 1179C is a direct form-fit-function replacement for the most common mass flow meters on the market today. The standard 3-inch footprint enables the 1179C to drop directly into the same space without modifying existing gas lines. Electrical connectors are the same Type “D” connectors, with similar pin-outs, signals, and functions as their industry counterparts. The 1179C is compatible with mass flow controller power supply and display electronics from MKS or other manufacturers. Swagelok, VCR-TM Swagelok Company

MKS 1179C Mass Flow Electronic Absolute Pressure Controller, 100 sccm N2 Equivalent, 15 Pin, 1/4" Swagelok®, Viton® O-Ring. MKS Instruments Part Number: 1179C00151CR1BV. The MKS 1179C is an all-metal mass flow controller designed to measure the flow of gases in a wide variety of applications. Input and output connections are 1/4" Swagelok® with Viton® O-Ring. The MKS 1179C mass flow controllers are available with full scales from 10 sccm to 20 slm, providing fast, repeatable flow metering to as low as 0.1 sccm.The 1179C is a direct form-fit-function replacement for the most common mass flow meters on the market today. The standard 3-inch footprint enables the 1179C to drop directly into the same space without modifying existing gas lines. Electrical connectors are the same Type “D” connectors, with similar pin-outs, signals, and functions as their industry counterparts. The 1179C is compatible with mass flow controller power supply and display electronics from MKS or other manufacturers. Swagelok, VCR-TM Swagelok Company

MKS 1179C Mass Flow Electronic Absolute Pressure Controller, 500 sccm N2 Equivalent, 15 Pin, Swagelok 4 VCR male. MKS Instruments Part Number: 1179C01352CR1BV. The MKS 1179C is an all-metal mass flow controller designed to measure the flow of gases in a wide variety of applications. Input and output connections are 1/4" Swagelok® with Viton® O-Ring. The MKS 1179C mass flow controllers are available with full scales from 10 sccm to 20 slm, providing fast, repeatable flow metering to as low as 0.1 sccm.The 1179C is a direct form-fit-function replacement for the most common mass flow meters on the market today. The standard 3-inch footprint enables the 1179C to drop directly into the same space without modifying existing gas lines. Electrical connectors are the same Type “D” connectors, with similar pin-outs, signals, and functions as their industry counterparts. The 1179C is compatible with mass flow controller power supply and display electronics from MKS or other manufacturers. Swagelok, VCR-TM Swagelok Company

MKS 1179C Mass Flow Electronic Absolute Pressure Controller, 1000 sccm N2 Equivalent, 15 Pin, 1/4" Swagelok®, Viton® O-Ring. MKS Instruments Part Number: 1179C00151CR1BV. The MKS 1179C is an all-metal mass flow controller designed to measure the flow of gases in a wide variety of applications. Input and output connections are 1/4" Swagelok® with Viton® O-Ring. The MKS 1179C mass flow controllers are available with full scales from 10 sccm to 20 slm, providing fast, repeatable flow metering to as low as 0.1 sccm.The 1179C is a direct form-fit-function replacement for the most common mass flow meters on the market today. The standard 3-inch footprint enables the 1179C to drop directly into the same space without modifying existing gas lines. Electrical connectors are the same Type “D” connectors, with similar pin-outs, signals, and functions as their industry counterparts. The 1179C is compatible with mass flow controller power supply and display electronics from MKS or other manufacturers. Swagelok, VCR-TM Swagelok Company

MKS 1179C Mass Flow Electronic Absolute Pressure Controller, 2,000 sccm N2 Equivalent, 15 Pin, 1/4" Swagelok®, Viton® O-Ring. MKS Instruments Part Number: 1179C01323CS1BV. The MKS 1179C is an all-metal mass flow controller designed to measure the flow of gases in a wide variety of applications. Input and output connections are 1/4" Swagelok® with Viton® O-Ring. The MKS 1179C mass flow controllers are available with full scales from 10 sccm to 20 slm, providing fast, repeatable flow metering to as low as 0.1 sccm.The 1179C is a direct form-fit-function replacement for the most common mass flow meters on the market today. The standard 3-inch footprint enables the 1179C to drop directly into the same space without modifying existing gas lines. Electrical connectors are the same Type “D” connectors, with similar pin-outs, signals, and functions as their industry counterparts. The 1179C is compatible with mass flow controller power supply and display electronics from MKS or other manufacturers. Swagelok, VCR-TM Swagelok Company

MKS 1179C Mass Flow Electronic Absolute Pressure Controller, 10,000 sccm N2 Equivalent, 15 Pin, 1/4" Swagelok®, Viton® O-Ring. MKS Instruments Part Number: 1179C01314CS1BV. The MKS 1179C is an all-metal mass flow controller designed to measure the flow of gases in a wide variety of applications. Input and output connections are 1/4" Swagelok® with Viton® O-Ring. The MKS 1179C mass flow controllers are available with full scales from 10 sccm to 20 slm, providing fast, repeatable flow metering to as low as 0.1 sccm.The 1179C is a direct form-fit-function replacement for the most common mass flow meters on the market today. The standard 3-inch footprint enables the 1179C to drop directly into the same space without modifying existing gas lines. Electrical connectors are the same Type “D” connectors, with similar pin-outs, signals, and functions as their industry counterparts. The 1179C is compatible with mass flow controller power supply and display electronics from MKS or other manufacturers. Swagelok, VCR-TM Swagelok Company

MKS Mass Flow Controller Cable Connects 246 or 247 Controllers to 179 or GM50A Mass Flow Controllers, 15-pin type D connector, 10 ft. (3m) Long. MKS Part Number: RCBDMFC-1-10. The MKS Mass Flow Controller Cable connects 179, 258, 358, 558, 1159, 1162, 1179, 1259, 1261, 1359, 1449, 1459, 1479, 1559, 1562, 1679, 2159, 2162, 2259, GE50A, GM50A, GM100A, IE50A, IM50A, P250A, IM250A, M10B, M100 Mass Flow controllers to 246, 247 or 660 controllers with 15-pin type D High-density subminiature to 15-pin standard subminiature connectors. This is the Cable ONLY. The MKS 946 is a versatile half-rack vacuum gauge measurement and control system, it provides power and simultaneous readout for up to six different vacuum gauges and/or mass flow controllers, with options for controlling pressure. Power Supplies/Readouts are designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The 946 Vacuum System Controller is a six channel/sequentially selectable single readout. Compatible with mass flow controllers and mass flow readouts. Signal cables for the MKS 946 are available on this website.

MKS Cable Connects Digital Readouts Controllers 246 or 247 to Pressure Transducers, 15-Pin D-Connector. MKS Part Number: CB259-5-10. This cable is for the MKS Pressure Controllers 621 thru 651 and PR 4000B, also MKS Mass-Flo® Controllers and Digital Readouts 246/247 thur 258, 358, 558, 1159, 1179, 1479, 1162, 1259, 1261, 1359, 1449, 1459, 1559, 1562, 1661, 1678, 1679, 2159, 2162, 2259, 1150/2 with CB260-3-1. Comes with a 15 pin "D" connector to be connected to Pressure Transducers (Baratron) 127, 128, 626, 627, 628 or 631B without trip point relay option and the other end connects to the MKS Pressure/Mass-Flo® Controllers/Meters listed. These cables are 10 feet long.

MKS Cable Connects Digital Readouts Controllers 246 or 247 to Pressure Transducers, 15-Pin D-Connector. MKS Part Number: CB259-5-20. This cable is for connecting MKS power supplies, process controllers, readouts, and cluster gauge measurement and control systems (PR4000, 146, 186, 651, 660) to Baratron HAC manometers (624, 625, 627, 628). This cable can also be used to connect power supplies, readouts, vacuum gauge and pressure controllers, mass flow controllers, and mass flow meters (247, 358, 558, 1150, 1152, 1359, 15559, 640, 641). Manufacturer Note: cable - 655 to 624, 625, 626, 627, 628, 722 15-pin manometers to 651, 655, PR4000 controllers and 246, 247 power supply/readouts - 20 feet