Thermo Scientific ThermoChill I LR Recirculating Chiller, 700 Watt Cooling, 115V PD1 Pump. Thermo Neslab Part Number 196211010000. The Thermo Scientific ThermoChill I LR recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is air-cooled only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These ThermoChill I LR chillers 115V PD1 Pump and RS232 offer the following features: Positive Displacement PD1 pump 1.4 gpm at 60 psig 700W (2391 BTU) cooling capacity at 20°C 115V 15 amp Voltage requirement: 115V/60Hz Low Range Setpoint Temperature Range: -10°C to +30°C Ambient Temperature Range: +10°C to +35°C 9.5 liter (2.5 gallons) Reservoir Volume Accessible fill port for easy filling Pressure gauge located on control panel for easy viewing of application pressure Intuitive digital controller with controller indicator lights Locking casters for easy maneuvering Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific ThermoChill I recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. They are very simple to use, simply make the plumbing connections, add recirculating fluid, turn on and select the set point temperature. It is that easy to install a ThermoChill system. These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This gives users the flexibility to meet a wide range of application needs. These ThermoChill recirculating chillers are low cost solutions for new replacements of the discontinued: Thermo Neslab ThermoChill I - Replacement for Neslab CFT25 CFT-25, 580 Watts Cooling @ 20 Degrees C Neslab Merlin M25 M-25, 750 Watts Cooling @ 20 Degrees CThermo Neslab ThermoChill II - Replacement for Neslab CFT33 CFT-33, 950 Watts Cooling @ 20 Degrees C Neslab Merlin M33 M-33, 1250 Watts Cooling @ 20 Degrees CThermo Neslab ThermoChill III - Replacement for Neslab CFT75 CFT-75, 2100 Watts Cooling @ 20 Degrees C Neslab Merlin M75 M-75, 2300 Watts Cooling @ 20 Degrees CThe user''s manual and product brochure for these Thermo Neslab ThermoChill series recirculating chillers can be downloaded in PDF format below.

Thermo Scientific ThermoChill II LR Recirculating Chiller, 1000W Cooling, 115V 20 amp PD1 Pump. Thermo Neslab Part Number 197211010000 The Thermo Scientific Neslab ThermoChill II LR recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is air-cooled only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These ThermoChill II LR 115V PD1 Pump recirculating chillers offer the following features: Positive Displacement PD1 pump 1.4 gpm at 60 psig 1000W (3415 BTU) cooling capacity at 20°C 115V 20 amp Voltage requirement: 115V/60Hz Low Range Setpoint Temperature Range: -10°C to +30°C Ambient Temperature Range: +10°C to +35°C 9.5 liter (2.5 gallons) Reservoir Volume Accessible fill port for easy filling Pressure gauge located on control panel for easy viewing of application pressure Intuitive digital controller with controller indicator lights Locking casters for easy maneuvering Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific ThermoChill I recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. They are very simple to use, simply make the plumbing connections, add recirculating fluid, turn on and select the set point temperature. It is that easy to install a ThermoChill system. These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This gives users the flexibility to meet a wide range of application needs. These ThermoChill recirculating chillers are low cost solutions for new replacements of the discontinued: Thermo Neslab ThermoChill I - Replacement for Neslab CFT25 CFT-25, 580 Watts Cooling @ 20 Degrees C Neslab Merlin M25 M-25, 750 Watts Cooling @ 20 Degrees CThermo Neslab ThermoChill II - Replacement for Neslab CFT33 CFT-33, 950 Watts Cooling @ 20 Degrees C Neslab Merlin M33 M-33, 1250 Watts Cooling @ 20 Degrees CThermo Neslab ThermoChill III - Replacement for Neslab CFT75 CFT-75, 2100 Watts Cooling @ 20 Degrees C Neslab Merlin M75 M-75, 2300 Watts Cooling @ 20 Degrees CThe user''s manual and product brochure for these Thermo Neslab ThermoChill series recirculating chillers can be downloaded in PDF format below.

Thermo Scientific ThermoChill II LR Recirculating Chiller, 1000W Cooling, 115V PD2 Pump and RS232. Thermo Neslab Part Number 197212120000 (This model also replaces the model: 197112010000) The Thermo Scientific Neslab ThermoChill II LR recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is air-cooled only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These ThermoChill II LR recirculating chillers 115V PD2 Pump and RS232 offer the following features: Positive Displacement PD2 pump 3.6 gpm at 60 psig 1000W (3415 BTU) cooling capacity at 20°C 115V 20 amp Voltage requirement: 115V/60Hz Low Range Setpoint Temperature Range: -10°C to +30°C Ambient Temperature Range: +10°C to +35°C 9.5 liter (2.5 gallons) Reservoir Volume Accessible fill port for easy filling Pressure gauge located on control panel for easy viewing of application pressure Intuitive digital controller with controller indicator lights RS232 Digital Communication Locking casters for easy maneuvering Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific ThermoChill I recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. They are very simple to use, simply make the plumbing connections, add recirculating fluid, turn on and select the set point temperature. It is that easy to install a ThermoChill system. These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This gives users the flexibility to meet a wide range of application needs. These ThermoChill recirculating chillers are low cost solutions for new replacements of the discontinued: Thermo Neslab ThermoChill I - Replacement for Neslab CFT25 CFT-25, 580 Watts Cooling @ 20 Degrees C Neslab Merlin M25 M-25, 750 Watts Cooling @ 20 Degrees C Thermo Neslab ThermoChill II - Replacement for Neslab CFT33 CFT-33, 950 Watts Cooling @ 20 Degrees C Neslab Merlin M33 M-33, 1250 Watts Cooling @ 20 Degrees C Thermo Neslab ThermoChill III - Replacement for Neslab CFT75 CFT-75, 2100 Watts Cooling @ 20 Degrees C Neslab Merlin M75 M-75, 2300 Watts Cooling @ 20 Degrees C The user's manual and product brochure for these Thermo Neslab ThermoChill series recirculating chillers can be downloaded in PDF format below.

Thermo Scientific ThermoChill III LR Recirculating Chiller, 2000 Watt Cooling, 208-230V PD1 Pump. Thermo Neslab Part Number 198231010000 The Thermo Scientific ThermoChill III recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is air-cooled only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These ThermoChill III chillers 208-230V PD1 Pump offer the following features: Positive Displacement PD1 pump – 1.4 gpm at 60 psig 2000W (6830 BTU) cooling capacity at 20°C 208-220V 20 amp Voltage requirement: 208-220V/60Hz Low Range Setpoint Temperature Range: -10°C to +30°C Ambient Temperature Range: +10°C to +35°C 19 liter (5 gallons) Reservoir Volume Accessible fill port for easy filling Pressure gauge located on control panel for easy viewing of application pressure Intuitive digital controller with controller indicator lights Locking casters for easy maneuvering Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific ThermoChill I recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. They are very simple to use, simply make the plumbing connections, add recirculating fluid, turn on and select the set point temperature. It is that easy to install a ThermoChill system. These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This gives users the flexibility to meet a wide range of application needs. These ThermoChill recirculating chillers are low cost solutions for new replacements of the discontinued: Thermo Neslab ThermoChill I - Replacement for Neslab CFT25 CFT-25, 580 Watts Cooling @ 20 Degrees C Neslab Merlin M25 M-25, 750 Watts Cooling @ 20 Degrees C Thermo Neslab ThermoChill II - Replacement for Neslab CFT33 CFT-33, 950 Watts Cooling @ 20 Degrees C Neslab Merlin M33 M-33, 1250 Watts Cooling @ 20 Degrees C Thermo Neslab ThermoChill III - Replacement for Neslab CFT75 CFT-75, 2100 Watts Cooling @ 20 Degrees C Neslab Merlin M75 M-75, 2300 Watts Cooling @ 20 Degrees C The user's manual and product brochure for these Thermo Neslab ThermoChill series recirculating chillers can be downloaded in PDF format below.

Thermo Scientific ThermoChill III LR Recirculating Chiller, 2000 Watt Cooling, 208-230V PD2 Pump. Thermo Neslab Part Number 198232010000. (This model also replaces the model: 198132120000) The Thermo Scientific ThermoChill III LR recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is air-cooled only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These ThermoChill III LR chillers 2000 Watt Cooling, 208-230V PD2 Pump offer the following features: Positive Displacement PD2 pump – 3.6 gpm at 60 psig 2000W (6830 BTU) cooling capacity at 20°C 208-220V 20 amp Voltage requirement: 208-220V/60Hz Low Range Setpoint Temperature Range: -10°C to +30°C Ambient Temperature Range: +10°C to +35°C 19 liter (5 gallons) Reservoir Volume Accessible fill port for easy filling Pressure gauge located on control panel for easy viewing of application pressure Intuitive digital controller with controller indicator lights Locking casters for easy maneuvering Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific ThermoChill I recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. They are very simple to use, simply make the plumbing connections, add recirculating fluid, turn on and select the set point temperature. It is that easy to install a ThermoChill system. These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This gives users the flexibility to meet a wide range of application needs. These ThermoChill recirculating chillers are low cost solutions for new replacements of the discontinued: Thermo Neslab ThermoChill I - Replacement for Neslab CFT25 CFT-25, 580 Watts Cooling @ 20 Degrees C Neslab Merlin M25 M-25, 750 Watts Cooling @ 20 Degrees CThermo Neslab ThermoChill II - Replacement for Neslab CFT33 CFT-33, 950 Watts Cooling @ 20 Degrees C Neslab Merlin M33 M-33, 1250 Watts Cooling @ 20 Degrees CThermo Neslab ThermoChill III - Replacement for Neslab CFT75 CFT-75, 2100 Watts Cooling @ 20 Degrees C Neslab Merlin M75 M-75, 2300 Watts Cooling @ 20 Degrees CThe user’s manual and product brochure for these Thermo Neslab ThermoChill series recirculating chillers can be downloaded in PDF format below.