Keyword Part Number:
SWIFT-SEAL KF-16 to 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF16, NW-16, 304 Stainless Steel This adapter converts a KF-16 flanged fitting to a 0.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-16 2 = 0.52 in. (13.2 mm) 3 = 0.79 in. (19.9 mm) 4 = 1.04 in. (26.3 mm) 5 = 1.29 in. (32.7 mm)
Condition: New
Part Number: P103919
Price: zł340.41
SWIFT-SEAL KF-16 to 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF16, NW-16, 304 Stainless Steel This adapter converts a KF-16 flanged fitting to a 0.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF16 2 = 0.77 in. (19.5mm) 3 = 0.78 in. (19.7 mm) 4 = 1.03 in. (26.1 mm) 5 = 1.28 in. (34.4 mm)
Condition: New
Part Number: P103920
Price: zł427.17
SWIFT-SEAL KF-25 to 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapter converts a KF-25 flanged fitting to a 0.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF25 2 = 0.52 in. (13.2 mm) 3 = 0.76 in. (19.2 mm) 4 = 1.00 in. (25.6 mm) 5 = 1.26 in. (31.9 mm)
Condition: New
Part Number: P103773
Price: zł420.75
SWIFT-SEAL KF-16 to 5/8 in. I.D. Compression Port, Quick Coupling Adapter, KF16, NW-16, 304 Stainless Steel This adapter converts a KF-16 flanged fitting to a 0.625 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-162 = 0.65 in. (16.4 mm)3 = 0.71 in. (17.9 mm)4 = 0.96 in. (24.3 mm)5 = 1.26 in. (30.1 mm)
Condition: New
Part Number: P1010080
Price: zł314.98
SWIFT-SEAL KF-25 to 5/8 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapter converts a KF-25 flanged fitting to a 0.625 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF25 2 = 0.64 in. (13.2 mm) 3 = 0.79 in. (19.9 mm) 4 = 1.04 in. (26.3 mm) 5 = 1.29 in. (32.7 mm)
Condition: New
Part Number: P103771
Price: zł420.20
SWIFT-SEAL KF-25 to 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapters converts a KF-25 flanged fitting to a 0.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-25 2 = 0.77 in. (19.6 mm) 3 = 0.9 in. (22.8 mm) 4 = 1.15 in. (29.1 mm) 5 = 1.28 in. (32.5 mm)
Condition: New
Part Number: P103770
Price: zł386.34
SWIFT-SEAL KF-25 to 1.0 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapter converts a KF-25 flanged fitting to a 1.0 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-25 2 = 1.02 in. (25.9mm) 3 = 0.81 in. (20.5mm) 4 = 1.06 in. (26.9 mm) 5 = 1.31 in. (33.2 mm)
Condition: New
Part Number: P103772
Price: zł424.23
SWIFT-SEAL KF-25 to 1 1/8 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapter converts a KF-25 flanged fitting to a 1.125 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-25 2 = 1.15 in. (29.1 mm) 3 = 1.04 in. (26.5 mm)
Condition: New
Part Number: P103769
Price: zł540.14
SWIFT-SEAL KF-40 to 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-16, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 0.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-402 = 0.52 in. (13.2 mm)3 = 0.85 in. (21.7 mm)4 = 1.10 in. (28.0 mm)5 = 1.35 in. (34.5 mm)
Condition: New
Part Number: P103774
Price: zł392.26
SWIFT-SEAL KF-40 to 5/8 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 0.625 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-402 = 0.65 in. (16.4 mm)3 = 0.72 in. (18.3 mm)4 = 0.97 in. (24.7 mm)5 = 1.22 in. (31.0 mm)
Condition: New
Part Number: P1010081
Price: zł362.27
SWIFT-SEAL KF-40 to 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 0.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 0.77 in. (19.6 mm) 3 = 0.86 in. (21.8 mm) 4 = 1.11 in. (28.1mm) 5 = 1.36 in. (34.5 mm)
Condition: New
Part Number: P103775
Price: zł427.64
SWIFT-SEAL KF-40 to 1.0 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.0 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.02 in. (25.9 mm) 3 = 0.85 in. (21.7 mm) 4 = 1.10 in. (28.1 mm) 5 = 1.35 in. (34.4 mm)
Condition: New
Part Number: P103776
Price: zł568.54
SWIFT-SEAL KF-40 to 1 1/8 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.125 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.15 in. (29.1 mm) 3 = 0.77 in. (19.7 mm) 4 = 1.02 in. (26.0 mm) 5 = 1.27 in. (32.3 mm)
Condition: New
Part Number: P103777
Price: zł655.81
SWIFT-SEAL KF-40 to 1 1/4 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.25 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.27 in. (32.3 mm) 3 = 0.76 in. (19.2 mm) 4 = 1.01 in. (25.5 mm) 5 = 1.26 in. (31.9 mm)
Condition: New
Part Number: P103922
Price: zł626.63
SWIFT-SEAL KF-40 to 1 3/8 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.375 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.39 in. (35.4 mm) 3 = 0.76 in. (19.3 mm) 4 = 1.01 in. (25.7 mm) 5 = 1.26 in. (32.0 mm)
Condition: New
Part Number: P104168
Price: zł584.72
SWIFT-SEAL KF-40 to 1 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.52 in. (13.2 mm) 3 = 0.76 in. (19.3 mm) 4 = 1.01 in. (25.7 mm) 5 = 1.26 in. (32.0 mm)
Condition: New
Part Number: P103921
Price: zł660.18
SWIFT-SEAL KF-50 to 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 0.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-16 2 = 0.52 in. (13.2 mm) 3 = 0.74 in. (18.9 mm) 4 = 0.99 in. (25.2 mm) 5 = 1.24 in. (31.6 mm)
Condition: New
Part Number: P103778
Price: zł495.24
SWIFT-SEAL KF-50 to 5/8 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 0.625 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 0.645 in. (16.4 mm) 3 = 0.72 in. (18.3 mm) 4 = 0.97 in. (24.7 mm) 5 = 1.22 in. (31.0 mm)
Condition: New
Part Number: P1010082
Price: zł435.76
SWIFT-SEAL KF-50 to 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 0.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 0.77 in. (19.6 mm) 3 = 0.81 in. (20.5 mm) 4 = 1.06 in. (26.9 mm) 5 = 1.31 in. (33.2 mm)
Condition: New
Part Number: P103779
Price: zł540.48
SWIFT-SEAL KF-50 to 1.0 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.0 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.02 in. (13.2 mm) 3 = 0.69 in. (17.6 mm) 4 = 0.94 in. (24.0 mm) 5 = 1.94 in. (30.3 mm)
Condition: New
Part Number: P103780
Price: zł528.29
SWIFT-SEAL KF-50 to 1 1/8 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.125 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.15 in. (29.1 mm) 3 = 0.78 in. (19.9 mm) 4 = 1.03 in. (26.2 mm) 5 = 1.28 in. (32.2 mm)
Condition: New
Part Number: P103781
Price: zł686.19
SWIFT-SEAL KF-50 to 1 1/4 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.25 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.27 in. (32.3 mm) 3 = 0.78 in. (19.9 mm) 4 = 1.03 in. (26.2 mm) 5 = 1.28 in. (32.2 mm)
Condition: New
Part Number: P1010083
Price: zł635.30
SWIFT-SEAL KF-50 to 1 3/8 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.375 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.39 in. (32.3 mm) 3 = 0.78 in. (19.9 mm) 4 = 1.03 in. (26.2 mm) 5 = 1.28 in. (32.2 mm)
Condition: New
Part Number: P1010084
Price: zł662.31
SWIFT-SEAL KF-50 to 1 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.52 in. (38.6 mm) 3 = 0.83 in. (21.1 mm) 4 = 1.08 in. (27.5 mm) 5 = 1.33 in. (33.8 mm)
Condition: New
Part Number: P103782
Price: zł755.85
SWIFT-SEAL KF-50 to 1 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.77 in. (38.6 mm) 3 = 0.83 in. (21.1 mm) 4 = 1.08 in. (27.5 mm) 5 = 1.33 in. (33.8 mm)
Condition: New
Part Number: P1010085
Price: zł714.25
SWIFT-SEAL KF-50 to 2.0 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 2.0 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 2.02 in. (51.3 mm) 3 = 0.76 in. (19.3 mm) 4 = 1.00 in. (25.6 mm) 5 = 1.26 in. (31.9 mm)
Condition: New
Part Number: P103783
Price: zł893.89
Replacement Viton O-Ring for Swift-Seal 1/2in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50 These replacement O-rings are made to fit 0.50 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P103919), KF-25 (P103773), KF-40 (P103774), and KF-50 (P103778).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 1/2 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50
Condition: New
Part Number: P1010709
Price: zł36.53
Replacement Viton O-Ring for Swift-Seal 5/8 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50 These replacement O-rings are made to fit 0.625 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P1010080), KF-25 (P103771), KF-40 (P1010081), and KF-50 (P1010082).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 5/8 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50
Condition: New
Part Number: P1010710
Price: zł21.63
Replacement Viton O-Ring for Swift-Seal 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50 These replacement O-rings are made to fit 0.75 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P103920), KF-25 (P103770), and KF-50 (P103779).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50
Condition: New
Part Number: P1010579
Price: zł33.94
Replacement Viton O-Ring for Swift-Seal 1.0 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50 These replacement O-rings are made to fit 1.0 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-25 (P103772), KF-40 (P103776), and KF-50 (P103780).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1.0 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50
Condition: New
Part Number: P1010711
Price: zł34.71
Replacement Viton O-Ring for Swift-Seal 1 1/8 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50 These replacement O-rings are made to fit 1.125 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-25 (P103769), KF-40 (P103777), and KF-50 (P103781).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 1 1/8 in. ID Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50
Condition: New
Part Number: P1010568
Price: zł27.63
Replacement Viton O-Ring for Swift-Seal 1 1/4 in. Diameter Series Compression Port Adapters- KF-40, KF-50 These replacement O-rings are made to fit 1.25 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-40 (P103922), and KF-50 (P1010083).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 1/4 in. ID Diameter Series Compression Port Adapters- KF-40, KF-50
Condition: New
Part Number: P1010713
Price: zł24.85
Replacement Viton O-Ring for Swift-Seal 1 3/8 in. Diameter Series Compression Port Adapters- KF-40, KF-50 These replacement O-rings are made to fit 1.375 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-40 (P104168), and KF-50 (P1010084).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 3/8 in. Diameter Series Compression Port Adapters- KF-40, KF-50
Condition: New
Part Number: P1010720
Price: zł24.30
Replacement Viton O-Ring for Swift-Seal 1 1/2 in. Diameter Series Compression Port Adapters- KF-40, KF-50 These replacement O-rings are made to fit 1.500 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-40 (P103921), and KF-50 (P103782).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 1/2 in. Inner Diameter Series Compression Port Adapters- KF-40, KF-50
Condition: New
Part Number: P1010722
Price: zł39.94
Replacement Viton O-Ring for Swift-Seal 1 3/4 in. Diameter Series Compression Port Adapters- KF-50 These replacement O-rings are made to fit 1.75 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-50 (P1010085).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 3/4 in. ID Diameter Series Compression Port Adapters- KF-50
Condition: New
Part Number: P1010726
Price: zł18.77
Replacement Viton O-Ring for Swift-Seal 2.0 in. Diameter Series Compression Port Adapters- KF-50 These replacement O-rings are made to fit 2.0 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-50 (P103783).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 2.0 in. Inner Diameter Series Compression Port Adapters- KF-50
Condition: New
Part Number: P1010727
Price: zł42.92
Replacement Retaining Ring for Swift-Seal 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50 These stainless steel replacement retaining rings are made to fit 0.75 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P103920), KF-25 (P103770), and KF-50 (P103779).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. These are Axially Assembled Internal retaining rings made act as a stop when properly installed within a Swift Seal fitting. Avoid scratching the bore interior by using correctly sized Ring Pliers. Stainless Steel Retaining Ring Replacement 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50
Condition: New
Part Number: P1010600
Price: zł26.51
Replacement Retaining Ring for Swift-Seal 1 1/8 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50 These stainless steel replacement retaining rings are made to fit 1.125 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-25 (P103769), KF-40 (P103777), and KF-50 (P103781).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. These are Axially Assembled Internal retaining rings made act as a stop when properly installed within a Swift Seal fitting. Avoid scratching the bore interior by using correctly sized Ring Pliers. Stainless Steel Retaining Ring Replacement 1 1/8 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50
Condition: New
Part Number: P1010599
Price: zł30.81