Keyword Part Number:
Swagelok SS-RTM4-F4-1, Rupture Disk Tee, 1/4 in. Male NPT-to-Female NPT, 1900 psig Burst Disk, 316L Stainless Steel This Swagelok® Rupture Disc Tee has a 1/4 male NPT inlet and 1/4 Female NPT outlet and is rated for 1900 psig (+/- 100 psig at 22°C / 72°F). These single-use rupture disc units are designed to rapidly vent sample cylinders or other equipment to atmosphere, providing pressure relief in the case of an overpressurization. The Swagelok rupture disc is welded to a body that is then threaded into a rupture disc Tee or valve body and sealed by an FKM O-ring. The disc can be replaced easily without removing the valve or tee from the system. Rupture disc replacements are available with a nominal burst pressure of either 1900 or 2850 psig. Caution: Compressed gas cylinders must be equipped with pressure relief devices in accordance with CGA S-1.1, the definitive standard for the selection of the correct pressure relief device required to meet the requirements of the U.S. DOT in 49 CFR for over 150 gases.Be sure to use the correct pressure-relief device for the gas being used. Proper filling of cylinders according to DOT specifications, or other local regulations, is critical in preventing overpressurization. For more information and specifications, please see the Sample Cylinder and Accessories download. Swagelok-TM Swagelok Company
Condition: New
Part Number: P1011129
Price: zł1,700.74
Swagelok SS-RTM4-F4-2, Rupture Disk Tee, 1/4 in. Male NPT-to-Female NPT, 2850 psig Burst Disk, 316L Stainless Steel This Swagelok® Rupture Disc Tee has a 1/4 male NPT inlet and 1/4 Female NPT outlet and is rated for 2850 psig (+/- 150 psig at 22°C / 72°F). These single-use rupture disc units are designed to rapidly vent sample cylinders or other equipment to atmosphere, providing pressure relief in the case of an overpressurization. The Swagelok rupture disc is welded to a body that is then threaded into a rupture disc Tee or valve body and sealed by an FKM O-ring. The disc can be replaced easily without removing the valve or tee from the system. Rupture disc replacements are available with a nominal burst pressure of either 1900 or 2850 psig. Caution: Compressed gas cylinders must be equipped with pressure relief devices in accordance with CGA S-1.1, the definitive standard for the selection of the correct pressure relief device required to meet the requirements of the U.S. DOT in 49 CFR for over 150 gases.Be sure to use the correct pressure-relief device for the gas being used. Proper filling of cylinders according to DOT specifications, or other local regulations, is critical in preventing overpressurization. For more information and specifications, please see the Sample Cylinder and Accessories download. Swagelok-TM Swagelok Company
Condition: New
Part Number: P1011130
Price: zł1,626.70
Swagelok SS-16DKM4-F4-1, Needle Valve with Rupture Disc, 1/4 in. Male NPT-to-Female NPT, 1900 psig Burst Disk, 316L Stainless Steel This Swagelok® Integral-Bonnet, Nonrotating-Stem Needle Valve with integrated Rupture Disc has a 1/4 male NPT inlet and 1/4 Female NPT outlet and is rated for 1900 psig (+/- 100 psig at 22°C / 72°F). The valve has a soft-seat stem and PCTFE stem tip which limits its'' maximum working temperature to 93°C (200°F). The valve has a maximum flow coefficient of 0.09Cv and can withstand pressures significantly higher than the rupture disc (up to 6000 psig at 37°C / 100°F). This straight pattern valve/rupture disc combination, made of 316L stainless steel is compact and convenient for sample cylinder use and anywhere where space is at a premium. The rupture disc can be replaced easily without removing the valve or tee from the system. Rupture disc replacements are available with a nominal burst pressure of either 1900 or 2850 psig. Caution: Compressed gas cylinders must be equipped with pressure relief devices in accordance with CGA S-1.1, the definitive standard for the selection of the correct pressure relief device required to meet the requirements of the U.S. DOT in 49 CFR for over 150 gases.Be sure to use the correct pressure-relief device for the gas being used. Proper filling of cylinders according to DOT specifications, or other local regulations, is critical in preventing overpressurization. For more information and specifications, please see the Sample Cylinder and Accessories and the Needle Valve downloads. Swagelok-TM Swagelok Company
Condition: New
Part Number: P1011131
Price: zł1,973.16
Swagelok SS-16DKM4-F4-2, Needle Valve with Rupture Disc, 1/4 in. Male NPT-to-Female NPT, 2850 psig Burst Disk, 316L Stainless Steel This Swagelok® Integral-Bonnet, Nonrotating-Stem Needle Valve with integrated Rupture Disc has a 1/4 male NPT inlet and 1/4 Female NPT outlet and is rated for 2850 psig (+/- 150 psig at 22°C / 72°F). The valve has a soft-seat stem and PCTFE stem tip which limits its'' maximum working temperature to 93°C (200°F). The valve has a maximum flow coefficient of 0.09Cv and can withstand pressures significantly higher than the rupture disc (up to 6000 psig at 37°C / 100°F). This straight pattern valve/rupture disc combination, made of 316L stainless steel is compact and convenient for sample cylinder use and anywhere where space is at a premium. The rupture disc can be replaced easily without removing the valve or tee from the system. Rupture disc replacements are available with a nominal burst pressure of either 1900 or 2850 psig. Caution: Compressed gas cylinders must be equipped with pressure relief devices in accordance with CGA S-1.1, the definitive standard for the selection of the correct pressure relief device required to meet the requirements of the U.S. DOT in 49 CFR for over 150 gases.Be sure to use the correct pressure-relief device for the gas being used. Proper filling of cylinders according to DOT specifications, or other local regulations, is critical in preventing overpressurization. For more information and specifications, please see the Sample Cylinder and Accessories and the Needle Valve downloads. Swagelok-TM Swagelok Company
Condition: New
Part Number: P1011132
Price: zł1,982.52
Swagelok SS-RDK-16-1900, Replacement Rupture Disc Unit, 1900 psig Burst Disk, 316L Stainless Steel This Swagelok® Rupture Disc Unit replaces a damaged unit on Swagelok Rupture Disc Tees and Needle valves with Rupture Disc. These single-use rupture disc units are designed to rapidly vent sample cylinders or other equipment to atmosphere, providing pressure relief in the case of an overpressurization. The Swagelok rupture disc is welded to a body that is then threaded into the Rupture Disc Tee or valve body and sealed by an FKM O-ring. The Rupture Disc Unit is replaced easily without removing the valve or tee from the system. Rupture disc replacements are available with a nominal burst pressure of either 1900 or 2850 psig. Caution: Compressed gas cylinders must be equipped with pressure relief devices in accordance with CGA S-1.1, the definitive standard for the selection of the correct pressure relief device required to meet the requirements of the U.S. DOT in 49 CFR for over 150 gases.Be sure to use the correct pressure-relief device for the gas being used. Proper filling of cylinders according to DOT specifications, or other local regulations, is critical in preventing overpressurization. For more information and specifications, please see the Sample Cylinder and Accessories download. Swagelok-TM Swagelok Company
Condition: New
Part Number: P1011133
Price: zł868.02