Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-ro
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Edwards nXR Multi Stage Roots Pumps On Sale Agilent TriScroll Pumps On Sale Edwards nEXT300D TStations On Sale Agilent IDP-7 Dry Scroll Vacuum Pumps On Sale Adixen 2021C2 Pumps On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC Vacuum Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Product Image 1
Product Image 2
Product Image 3

Agilent Varian Optional 170ºF Pump Ready Thermal Switch for AX-65 Diffusion Pump, L9964002

Condition:
  New
Part Number:
  P106754
Warranty:
  Varian Warranty

Available Now   5  

Sale: lei871.55

Agilent Varian Optional 170ºF Pump Ready Thermal Switch for AX-65 Diffusion Pump, L9964002 871.55
Currency: Romanian Leu (RON)

Description

Agilent Varian Optional Pump Ready 170ºF Thermal Switch for AX-65 Diffusion Pump.
Agilent Varian Part Number L9964002

This is a (Optional) Pump Ready thermal switch. This thermal Pump Ready switch, is to be attached to the side plate of the AX-65 Pump next to the over temperature thermal switch. This optional thermal switch can be connected to a light to show when the pump is at operating temperature. It is normally open and closes when the pump reaches operating temperature. The switch is set to close at 170ºF (operating temperature). See graphic for installation/location on the pump.

Brochure

Specifications
Specification Units AX-65 with cold cap AX-65 with baffle
Operating Range
Torr
mbar
3x10⁻³ to < 5x10⁻⁸
3.9x10⁻³ to < 6.5x10⁻⁸
8.0x10⁻³ to < 5x10⁻⁸
10.4x10⁻³ to < 6.5x10⁻³
Pumping Speed,
Maximum
l/s, Air
l/s, Helium
65
90
30
65
Throughput (Air), Max.
Optimum Range

Overload Range
(@ 1x10⁻² Torr)
Torr-l/s
mbar-l/s

Torr-l/s
mbar-l/s
0.19
0.25

0.30
0.40
Forepressure, Max.
No Load


Full Load
Torr
mbar

Torr
mbar
0.75
1.00

0.60
0.78
Compression Ratio Air
He
4x10⁻⁷
4x10⁻⁶
Backstreaming Rate
at Pump Inlet
mg/cm² < 2x10⁻⁴ < 2x10⁻⁵
Electrical Power
VAC, 50/60 Hz
1 Phase
Watts 200/250
Warmup Time minutes 7
Cooldown Time minutes 10
Fluid Charge cc 30
Recommended
backing pump
capacity
cfm (m³/hr) ≥ 1.5 (2.5)
Cooling Fan cfm 30
Inlet Flange N/A NW50 or ISO-63-K
Body N/A Stainless steel
Jet Assembly N/A Three-stage, self-aligning, aluminum, w/ aluminum cold cap
Net Weight lbs (kg) 8 (3.63)

AX-65 Diffusion Pump Replacement Parts List

Description Part No. Item
Jet Assembly L9674301 1
Cold Cap L9675301 2
Inlet Baffle L9706001 3
Inlet Baffle Retrofit Kit R1160065 3
Jet Alignment Kit L9995301 4
Heaters (one heater required per pump) 5
   90 V / 250 watt Heater Harness L9994301 5.1
   115 V / 250 watt Heater Harness L9994303 5.2
   165 V / 250 watt Heater Harness L9994302 5.3
   220 V / 250 watt Heater Harness L9994304 5.4
   115 V / 250 watt Heater Harness L9994307 5.5
   220 V / 250 watt Heater Harness L9994308 5.6
Normally Closed Thermal Switch (set to open at 365°) L9964001 6
Optional Normally Open Switch (set to close at 170°) L9964002 7
Fan 661300138 8
Foreline Baffle L9676301 9
Inlet Centering Ring Assembly, NW50 with Viton O-ring L9680301 10
Foreline Centering Ring Assembly, NW16 with Viton O-ring KC16AV 11
Bottom Insulation L9701002 12
Santovac 5 diffusion pump fluid, 40 cc 695405001 13
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com



Press ESC to Close


deepbox image 2
load time = 0.8672