M4-0.7 x 4 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 4 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 4 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 4 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 4 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 4 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 5 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 5 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 5 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 5 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 5 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 5 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 6 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 6 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 6 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 6 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 6 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 6 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 8 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 8 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 8 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 8 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 8 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 8 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 10 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 10 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 10 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 10 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 10 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 10 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 12 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 12 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 12 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 12 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 12 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 12 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 16 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 16 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 16 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 16 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 16 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 16 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 18 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 18 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 18 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 18 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 18 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 18 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 20 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 20 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 20 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 20 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 20 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 20 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 22 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 22 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 22 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 22 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 22 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 22 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 25 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 25 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 25 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 25 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 25 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 25 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com

M4-0.7 x 30 mm Socket Head Cap Screws (SHCS), M4 With 0.7 mm Thread Pitch By 30 mm Long, 304 Stainless Steel, 1 Each. These M4-0.7 x 30 mm socket head cap screws (SHCS) have a diameter of M4, with 0.7 mm thread pitch, and are 30 mm long. They are non-magnetic being made of chemical and corrosion resistant 304 stainless steel. Socket head cap screws have a smaller head diameter than normal screws. They are tightened using an Allen wrench (hex key) which is inserted into the recessed hex-drive socket located in the screw head. The screw length is measured from under the head (length of shaft only) and are sold as 1 each. M4-0.7 x 30 mm socket head cap screws (SHCS) Product details: Head style: Socket cap Drive type: Allen Material: Stainless steel Grade: 304 Stainless steel (chemical resistant) Diameter: M4 Thread count: 0.7 mm per thread Length: 30 mm Thread direction: Right hand Drive size: 2.0 mm Allen Wrench Needed Units: Metric We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com