Ideal Vacuum Cube 12 x 12 Vacuum Chamber Blank Plate No Ports Uncoated for Bakeout. This is an uncoated Ideal Vacuum Cube 12 x 12 inch blank plate without ports and without the internal optical breadboard grid found on most other Cube plates. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This is the least expensive 12 x 12 Cube plate we offerUse it as is for the bottom of a Cube or any other Cube side where ports are not needed, or customize to your requirements by adding unusual or proprietary ports, for welding on bulkhead fittings, or for custom attachments and fixtures. Note that Ideal Vacuum offers custom Cube plate solutions. Please speak to your representative for a quick quote. Features: 12 x 12 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 12 x 12 x 12 6x12x12 (on 12 x 12 side) 24 x 24 x 24

Ideal Vacuum Cube Plate Adapter Kit 12 x 12 in. to One Centered 6 x 6 in., Uncoated. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to one centered 6 x 6 inch opening. The 6 x 6" opening accepts any 6 x 6 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Kit includes: 12 x 12 to one centered 6 x 6 adapter plate One Viton O-ring for 12 x 12 Cube Plate (P108428) One Viton O-ring for 6 x 6 Cube plate (P107295) Thirty-two 1/4"-20 x 5/16" long SHCS mounting screws, P1013341 (includes 8 spares) Features: Allows one 6 x 6 plate to attach to a 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C Internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube 12 x 12 Vacuum Chamber Plate With One Conflat CF 10.0 in. Port Uncoated Stainless Steel. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 12 x 12 inch plate with one CF 10.0" centered Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires twenty-four (24) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012252). The CF port is not compatible with metal gaskets. Use only Viton seals (P104347). Cube baseline vacuum is 1 x 10-7 Torr. Features: 12 x 12 plate 6061-T6 aluminum 304L stainless steel Single CF 10.0" port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 12 x 12 x 12 6x12x12 (on 12 x 12 side) 24 x 24 x 24

Ideal Vacuum Cube 12 x 12 in. to One 6 x 6 in. Adapter Plate, with Four KF-25 Ports, Uncoated with Internal Optical Breadboard, Hardware and O-ring. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to a single, centered 6 x 6 inch opening. This adapter plate also has four KF-25 ports located in the corners of the plate. The 6 x 6 opening accepts any 6 x 6 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, the KF-25 ports on this adapter plate use KF bulkhead clamps and cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599). Kit includes: 12 x 12 to 6 x 6 centered adapter plate One Viton O-ring for 12x12 Cube Plate (P108428) One Viton O-ring for 6 x 6 Cube plate (P107295) Eight 1/4"-20 x 5/16" long SHCS screws for 6 x 6 plate mounting (P1013341) Features: Allows 6 x 6 plate to attach to center of 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C Four KF-25 (NW-25) bulkhead ports (uses KF-25 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Plate Adapter Kit 12 x 12 in. to Two 6 x 12 in., Uncoated. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to two 6 x 12 inch openings. The 6 x 12" opening accepts any 6 x 12 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Note that this Cube adapter plate is thicker than other plates (to maintain plate rigidity) and therefore uses 1/2" long socket head cap screws for mounting to the 12" x 12" frame side. The 6 x 12 plates mount with the usual 1/4"-20 x 5/16" long screws. Kit includes: 12 x 12 to two 6 x 12 adapter plate One Viton O-ring for 12 x 12 Cube Plate (P108428) Two Viton O-ring for 6 x 12 Cube plate (P108339) Sixteen 1/4"-20 x 1/2" long SHCS screws for mounting to 12 x 12" frame side, P1013343 (includes 8 spares) Twenty-four 1/4"-20 x 5/16" long SHCS screws for 6 x 12 plate mounting, P1013341 (includes 8 spares) Features: Allows two 6 x 12 plates to attach to a 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C No internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube Plate Adapter Kit 12 x 12 in. to Four 6 x 6 in., Uncoated. This is an uncoated Ideal Vacuum Cube adapter plate that converts a 12 x 12 Cube frame opening to four 6 x 6 inch openings. The 6 x 6" openings accept any 6 x 6 Cube plate, greatly expanding porting options for pumping and feedthroughs, or viewing options. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Kit includes: 12 x 12 to four 6 x 6 adapter plate One Viton O-ring for 12 x 12 Cube Plate (P108428) Four Viton O-ring for 6 x 6 Cube plate (P107295) Fifty-six 1/4"-20 x 5/16" long SHCS mounting screws, P1013341 (includes 8 spares) Features: Allows four 6 x 6 plates to attach to a 12 x 12 frame side Use on any 12" x 12" Cube frame side 6061-T6 aluminum Uncoated for bakeout to 150°C No internal optical breadboard Mounts in any orientation Please download the Cube plate installation manual for installation instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

Ideal Vacuum Cube 12 x 12 inch Thermally Isolated TVAC Chamber Plate For Circulating Hot or Cold Fluids including Liquid Nitrogen LN2 with Type-K Thermocouple. This is a thermally isolated Ideal Vacuum Cube 12 x 12 inch TVAC plate with 1/2” OD vacuum isolated fluid tubes and includes Swagelok® fittings. This plate allows the vacuum side of the plate to be thermally controlled by circulating hot or cold fluids, including LN2 through its stainless steel tubes and internal channels. The operating temperature range of this plate is 200°C to -200°C (392°F to -328°F). A Type-K thermocouple is mounted through a KF-16 port for logging temperature data or for a user supplied setpoint controller to use. The blanked KF-40 port is unused. This plate is uncoated and may be baked out to 150°C (the limit of the Viton O-ring). This Cube plate allows the Ideal Vacuum Cube to be used as a thermal vacuum or thermal shock vacuum chamber. It can also function as a chilled trap for chemical and high boiling point liquids. Multiple TVAC plates may be mounted to a Cube and plumbed together to enhance temperature control capability. Fluid is commonly supplied by a recirculating heater or chiller such as those made by Thermo Scientific, Neslab, and Huber. Insulated supply and return hoses connect the heater/chiller system to the thermal plate with 0.5" OD tube fittings. The core of the plate is made of 304L stainless steel and has an optical breadboard on the vacuum side with a 10.275" x 10.275" temperature-controlled area. The plate’s thermally isolated core allows it to be operated between 200°C to -200°C (392°F to -328°F) without compromising vacuum seal integrity. The plate is designed to occupy minimal volume within the Cube envelope and may be mounted in any orientation. Features: 12" x 12" plate size Uncoated 6061-T6 aluminum plate 1/2” OD stainless steel supply and return tubes with Swagelok fittings Operating temperature range 200°C to -200°C (392°F to -328°F) Stainless steel vacuum isolated10.275" x 10.275" temperature-controlled core Internal optical breadboard Built-in Type-K thermocouple Bakeout to 150°C Mounts in any orientation Directly mounts to frame size: 12 x 12 x 12 6 x 12 x 12 (on 12 x 12 side) 24 x 24 x 24 Swagelok-TM Swagelok Company

Ideal Vacuum Cube 12 x 12 inch Thermally Isolated TVAC Chamber Plate with Cooling Tubes for LN2 and Resistive Heating for Extreme Temperatures with Type-K Thermocouple. This is a thermally isolated Ideal Vacuum Cube 12 x 12 inch TVAC plate for extreme temperatures. It has 1/2” OD stainless steel vacuum isolated fluid tubes with Swagelok® fittings for circulating cooling fluids, including LN2. The plate also has embedded resistive heating elements for elevated temperatures. The heaters operate at 100-240 VAC. The operating temperature range of this plate is 200°C to -200°C (392°F to -328°F). A Type-K thermocouple is mounted through a KF-16 port for logging temperature data or for a user supplied setpoint controller to use. The KF-40 port is used to connect the heating elements to an outboard controller, such as the Ideal Vacuum PID Plug & Play Heater Control System. This plate is uncoated and may be baked out to 150°C (the limit of the Viton O-ring). This Cube plate allows the Ideal Vacuum Cube to be used as a thermal vacuum or thermal shock vacuum chamber. It can also function as a chilled trap for chemical and high boiling point liquids. Multiple TVAC plates may be mounted to a Cube and plumbed together to enhance temperature control capability. Fluid is commonly supplied by a circulating fluid chiller such as those made by Thermo Scientific, Neslab, and Huber, or from a user’s bulk LN2 tank. Insulated supply and return hoseswith 1/2" OD tube ends are used to connect the chilled fluid lines. The core of the plate is made of 304L stainless steel and has an optical breadboard on the vacuum side with a 10.275" x 10.275" temperature-controlled area. The plate’s thermally isolated core allows it to be operated between 200°C to -200°C (392°F to -328°F) without compromising vacuum seal integrity. The plate is designed to occupy minimal volume within the Cube envelope and may be mounted in any orientation. Features: 12" x 12" plate size Uncoated 6061-T6 aluminum plate 1/2” OD stainless steel supply and return tubes with Swagelok fittings Operating temperature range 200°C to -200°C (392°F to -328°F) Stainless steel vacuum isolated10.275" x 10.275" temperature-controlled core Built-in Type-K thermocouple Bakeout to 150°C Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 12 x 12 x 12 6 x 12 x 12 (on 12 x 12 side) 24 x 24 x 24 Swagelok-TM Swagelok Company

Ideal Vacuum Cube 12 x 12 inch Thermally Isolated TVAC Chamber Plate with Resistive Heating and Built-in Type-K Thermocouple. This is a thermally isolated Ideal Vacuum Cube 12 x 12 inch TVAC plate for high temperatures. The plate has embedded resistive heating elements for elevated temperatures. The heaters operate at 100-240 VAC. The operating temperature range of this plate is from ambient to 200°C (392°F). A Type-K thermocouple is mounted through a KF-16 port for logging temperature data or for a user supplied setpoint controller to use. The KF-40 port is used to connect the heating elements to an outboard controller, such as the Ideal Vacuum PID Plug & Play Heater Control System. This plate is uncoated and may be baked out to 150°C (the limit of the Viton O-ring). The core of the plate is made of 304L stainless steel and has an optical breadboard on the vacuum side with a 10.275" x 10.275" temperature-controlled area. The plate’s thermally isolated core allows it to be operated between ambient and 200°C (392°F) without compromising vacuum seal integrity. The plate is designed to occupy minimal volume within the Cube envelope and may be mounted in any orientation. Features: 12" x 12" plate size Uncoated 6061-T6 aluminum plate Built-in resistive heating elements Operating temperature range ambient to 200°C (392°F). Stainless steel vacuum isolated10.275" x 10.275" temperature-controlled core Built-in Type-K thermocouple Bakeout to 150°C Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 12 x 12 x 12 6 x 12 x 12 (on 12 x 12 side) 24 x 24 x 24 Swagelok-TM Swagelok Company