Leybold iPad Controller with software and protective case for Phoenix L300i Series Helium Leak Detector Leybold pn: 252005V01 The Leybold iPad Controller with software and protective case for Phoenix L300i Series Helium Leak Detector incorporates brand new technology to bring users an interface with intelligent control. Other user benefits include: Big, clearly structured, easy-to-read touch-screen control High-resolution retina 9.7 display Easy Start/Stop function Large, dynamic measuring range iData storage Wireless remote option (WIFI) Talking Leak Detector Set-up of individual test profiles to simplify leak detection Barcode scanner option The Leybold Phoenix Series L300i helium leak detector is the smallest in this series and offers amazing new features and control options. The minimum detectable leak rate available for this unit in vacuum mode is <5x10-12 mbar l/s and in sniffer mode <1x10-7 mbar l/s. The inlet flange on the Phoenix L300i is DN25KF and it comes standard with the TW70H Turbo Pump, a TL7 internal calibrated leak and certificate of calibration. This helium leak detector can be used as a portable or benchtop unit. For the ultimate control and operation of the machine an iPad is recommended and offered as an optional accessory. Please note that the Phoenix L300i Leak Detectors do not come standard with the RC310 wireless or corded remote or the iPad controller. These items are sold separately and available below in our Related section. The Phoenix L300i helium leak detector offers new features such as: Quick Start up (< 2 minutes) Extremely fast response Different reporting options – based on particular application needs Optional barcode scanner to increase working speed Auto Calibration High Sensitivity Detectable Masses of 2, 3 and 4 Flexible application areas Maximum mobility due to wireless remote control RC 310 or iPad Modular design makes this unit very service friendly 10 languages available (iPad Version: only German, English) Most robust and reliable ion source (extended warranty time) Please see below in our “Related” section for additional accessories that may benefit your vacuum applications and needs. We offer a large variety of vacuum fittings, hoses, vacuum gauges, sensors/transducers and accessories sold separately on this website. Call us for a quote (505) 872-0037. For instruction manuals or data sheets please see the Available Download PDF's Below.

Leybold RC310WL Wireless Remote Control for Phoenix L300i Series Helium Leak Detector Leybold pn: 252014V01 The Leybold RC310WL Wireless Remote Control is designed to be used with any of the Phoenix L300i Helium Leak Detectors in the L300i series. The connectors included with this remote control make it more flexible to use around your laboratory, facility or classroom. The Leybold Phoenix Series L300i helium leak detector is the smallest in this series and offers amazing new features and control options. The minimum detectable leak rate available for this unit in vacuum mode is <5x10-12mbar l/s and in sniffer mode <1x10-7mbar l/s. The inlet flange on the Phoenix L300i is DN25KF and it comes standard with the TW70H Turbo Pump, a TL7 internal calibrated leak and certificate of calibration. This helium leak detector can be used as a portable or benchtop unit. For the ultimate control and operation of the machine an iPad is recommended and offered as an optional accessory. Please note that the Phoenix L300i Leak Detectors do not come standard with the RC310 wireless or corded remote or the iPad controller. These items are sold separately and available below in our Related section. The Phoenix L300i helium leak detector offers new features such as: Quick Start up (< 2 minutes) Extremely fast response Different reporting options – based on particular application needs Optional barcode scanner to increase working speed Auto Calibration High Sensitivity Detectable Masses of 2, 3 and 4 Flexible application areas Maximum mobility due to wireless remote control RC 310 or iPad Modular design makes this unit very service friendly 10 languages available (iPad Version: only German, English) Most robust and reliable ion source (extended warranty time) Please see below in our “Related” section for additional accessories that may benefit your vacuum applications and needs. We offer a large variety of vacuum fittings, hoses, vacuum gauges, sensors/transducers and accessories sold separately on this website. Call us for a quote (505) 872-0037. For instruction manuals or data sheets please see the Available Download PDF's Below.

Leybold RC310C Corded Remote Control for Phoenix L300i Series Helium Leak Detector Leybold pn: 252013V01 The Leybold RC310C Corded Remote Control is designed to be used with any of the Phoenix L300i Helium Leak Detectors in the L300i series. Included with the remote control is a 4m cord and magnetic bracket to attach the controller to the helium leak detector. The Leybold Phoenix Series L300i helium leak detector is the smallest in this series and offers amazing new features and control options. The minimum detectable leak rate available for this unit in vacuum mode is <5x10-12mbar l/s and in sniffer mode <1x10-7mbar l/s. The inlet flange on the Phoenix L300i is DN25KF and it comes standard with the TW70H Turbo Pump, a TL7 internal calibrated leak and certificate of calibration. This helium leak detector can be used as a portable or benchtop unit. For the ultimate control and operation of the machine an iPad is recommended and offered as an optional accessory. Please note that the Phoenix L300i Leak Detectors do not come standard with the RC310 wireless or corded remote or the iPad controller. These items are sold separately and available below in our Related section. The Phoenix L300i helium leak detector offers new features such as: Quick Start up (< 2 minutes) Extremely fast response Different reporting options – based on particular application needs Optional barcode scanner to increase working speed Auto Calibration High Sensitivity Detectable Masses of 2, 3 and 4 Flexible application areas Maximum mobility due to wireless remote control RC 310 or iPad Modular design makes this unit very service friendly 10 languages available (iPad Version: only German, English) Most robust and reliable ion source (extended warranty time) Please see below in our “Related” section for additional accessories that may benefit your vacuum applications and needs. We offer a large variety of vacuum fittings, hoses, vacuum gauges, sensors/transducers and accessories sold separately on this website. Call us for a quote (505) 872-0037. For instruction manuals or data sheets please see the Available Download PDF's Below.

Leybold Leak Detector Preamplifier for Phoenix, L200i or L300i Leybold Part Number 20099046This leak detector preamplifier is composed of a tube shaped suppressor and the collecting plate. The suppressor has a positive potential which is slightly less than the anode''s potential. The suppressor''s purpose is to prevent scattered ions (which have lower energy) from reaching the collector. This improves resolution at low detection rates. The current generated on the ion collector is amplified. In the most sensitive range, the detection limit is approximately 1x10-15 A. The amplifier also monitors its own temperature, and requests a calibration for every 10°F change. Replacing the Preamp and Ion Collector Required Items: • 20099046 Preamp and Ion Collector (includes gasket seal) • 8 mm open end wrench • Clean, lint free glovesPower down unit, then disconnect Preamp and Ion Suppressor Electrical Cable Loosen the four 8 mm bolts at the flange. Remove the detector from the rear. A 0.5 mm thick sealing gasket is used on the flat seal. Before installing the new detector, all sealing surfaces must be cleaned with a piece of clean cloth or tissue dipped in alcohol. Even though the seals may be reused several times, it is recommended to the use the new gasket. Make absolutely sure the sealing gasket is not damaged as scratches or marks may cause leaks. Helium Leak Testing BasicsHelium mass spectrometry, or helium leak testing, is a highly precise means of leak detection. This technology was first developed for the Manhattan Project during World War II to locate extremely small leaks in the gas diffusion process.At the heart of helium leak testing is a complex piece of equipment called a helium mass spectrometer. Quite simply, this machine is used to analyze air samples (which are introduced into the machine via vacuum pumps) and provides a quantitative measurement of the amount of helium present in the sample. In practice, a leak, is identified by a rise in the level of helium being analyzed by the machine.Helium leak testing can identify extremely small leaks. For example, our equipment can detect a leak so small that it would emit just two cubic centimeters of helium (or the amount equal to two sugar cubes) in 320 years. While very few applications require this level of precision, this example serves to highlight the accuracy possible with this process.While helium leak detection may appear to be a simple procedure, the process involves a combination of both art and science. The user must ensure the equipment is functioning properly and the process is highly dependant upon the user’s experience. Consider this analogy: while anyone with enough money can buy an airplane, learning how to fly one takes a lot of practice. The same is true with helium leak detection—make sure your pilot knows how to fly.Why Is Helium Superior?While many gases are used in leak detection, helium’s qualities provide for superior testing. Having an AMU (Atomic Mass Unit) of only 4, helium is the lightest inert gas. Only hydrogen, with an AMU of 2, is lighter than helium. However, due the hydrogen’s explosive potential it is rarely used.Additional reasons why helium is a superior tracer gas:Only modestly present in the atmosphere (roughly 5 parts per million) Flows through cracks 2.7x faster than air Nontoxic Nondestructive Nonexplosive Inexpensive User Friendly Due to these attributes, and its high sensitivity, helium leak testing has gained broad acceptance in a wide range of leak testing applications. Helium Leak Testing’s two primary testing modes are spray probe and sniffer probe.Two primary methods of helium leak testing:Spray Probe Sniffer Probe The choice between these two modes is based on both the size of the system being tested, as well as, the level of sensitivity required.Spray Probe: Provides Maximum SensitivityFor this technique, the leak detector is hooked directly to the system under test and the inside of the system is evacuated. Once an acceptable vacuum is achieved, helium is sprayed discreetly on the outside of the system, with particular attention being paid to any suspect locations. Any leaks in the system, including defective welds (caused by cracks, pin holes, incomplete welds, porosity, etc.), flawed or missing gaskets, leaks due to loose clamps, or any other defect will allow helium to pass and be readily detected by the machine. The source of any leaks can then be accurately pinpointed and repaired.The spray probe process is used to achieve the highest level of sensitivity. The equipment being used dictates the maximum sensitivity achievable; in Jurva Leak Testing’s case it is 2x10-10 std cc/sec. This technique does require that the system being tested is relatively leak tight prior to testing, as an ample vacuum is required for testing. However, by using special throttling devices a gross test can typically be performed. The gross test should eliminate any major leaks, permitting the use of increased sensitivity.The following are examples of systems that we test using the spray probe technique:A-bar furnaces E-beam systems Laser systems Metal deposition equipment Distillation systems Vacuum systems Sniffer ProbeFor this technique, helium is purged throughout the inside of system being tested. Due to the innate properties of helium it readily migrates throughout the system and in its attempt to escape penetrates any imperfections, including: defective welds (caused by cracks, pin holes, incomplete welds, porosity, etc.), flawed or missing gaskets, leaks due to loose clamps, or any other defect. The system’s exterior is then scanned by using a probe attached to the leak tester. Any leaks will result in an increased level of helium nearest the source and be readily detected. Leak sources can then be pinpointed, providing the opportunity for immediate repair and retest.Unlike the spray probe technique, this process is very flexible and can be adapted to meet the needs of any virtually any system in which helium can be injected. There is no practical size limitation. The sniffer probe technique is not as sensitive as the spray probe process, however, due to the amount of helium present in the air (approximately 5 ppm). The maximum sensitivity achievable under this procedure is approximately 1x10-6 std cc/sec. Nevertheless, this process is vastly superior to other traditional leak testing methods, such as: bubble testing, acoustic emission, liquid penetrant or vacuum box testing.The following list is an example of systems that Jurva Leak Testing has tested using the sniffer probe process:Storage tanks (both above ground and below) Floating roofs Underground pipelines Underground cables Aseptic systems (flash coolers, heat exchangers, fillers, etc.) Any vessel/line or system that can be pressurized

Leybold I/0 Phoenix interface module. Leybold pn: 252211V02 Leybold Phoenix I/O interface module I/O 1000. A device that is an interface between the leak detector Phoenix Quadro and an external controller. Instruction .pdf for use can be downloaded at Downloads to the side.

Leybold Valve V5 for Phoenix L300i Leak Detector. Leybold pn: 200001375 Leybold Valve V5 for Phoenix L300i Leak Detector. 12 VDC. This valve connects to the Phoenix L300i Leak Detector Valve Block.

Leybold 24VDC Valve V3 for Phoenix UL200 and L300i Helium Leak Detectors. Leybold Part Number: 20099052. Leybold Valve V3 for the Phoenix L300i and valve V1 for the UL200 Helium leak detectors. 24 VDC. This valve connects to the Phoenix Leak Detector Valve Block.

Leybold Flat Washer Seals for Helium Leak Detector Mass Spectrometer Phoenix L300i. Leybold Size 41.5 X 55mm - P/N 20099135 (pack of 20) This is a package of 20 flat washers for the Leybold Phoenix L300i Helium Leak Detector Mass Spectrometer, for locations of the washers See graphic to the left, highlighted in yellow.

Leybold Phoenix Quadro, Vario & L300i and Edwards ELD500, Replacement Fuse Set PN: 200000641 This is a complete set of all the different fuses used inside Leybold Phoenix Quadro, Vario, L300i and Edwards ELD500 helium leak detectors. The set consists of 14 different value fuses in packs of 10 fuses each value. Fuse values are: 32mA, 200mA, 315mA, 500mA, 800mA, 1A, 1.6A, 2A, 2.5A, 3.15A, 4A, 6.3A, 8A, 10A.

Leybold Fan Filter Media for Phoenix Quadro Helium Leak Detectors. Leybold PN: E200001210 Fan Filter Media for the Leybold Phoenix HLD. Located to the back of the Quadro Leak Dectector at the fan area.

Leybold Replacement Filter Holder for UL 200 Helium Leak Detectors PN: 20099026 This is a replacement filter element for Leybold LDS Leak Tracer, HLT560, Phoenix L200 & L300, UL200 helium leak detectors.