Keyword Part Number:
Ideal Vacuum Cube Quick Knob Assembly, Includes 1 Quick Knob, 1 Fastener and Fastening Bolt Quick and Easy To Install, Made With 6061-T6 Aluminum Alloy These Quick Knobs are designed to work with the Chamber Hinge and Glass viewing window plate assemblies to make opening and closing the Vacuum Cube easy and efficient. Each Quick Knob assembly includes 1 Quick Knob (connected to fastener) and 1 1/4-20 fastening bolt. Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P107936
Price: ₺932.86
Ideal Vacuum Cube Foot Kit, Designed To Support The Weight Of A Complete Hexagonal Modular Vacuum Chamber Assembly, Vibration Isolating, 6 feet. Quick and Easy To Install, Made With Vibration Isolating Rubber These vibration isolation mounting support kits are designed to be used as replacement parts for 6x6x6 hexagonal modular vacuum chambers. The rubber support feet are designed to thread into the bottom plate near each of its six corners. The cube plates include tapped threaded holes for access on the outside of the plates, for easy mounting of these support feet or standoff posts to optical benches. Components included in this kit are: Qty 6 each, Rubber Vibration Support Feet Qty 6 each, Bolts Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1010086
Price: ₺932.86
Ideal Vacuum Cube Foot Kit, Designed To Support The Weight Of A Complete Cube Assembly, Vibration Mount Quick and Easy To Install, Made With Vibration Isolating Rubber These vibration isolation mounting support kits are designed to be used as replacement parts for 6x6x6 vacuum cubes. The rubber support feet are designed to thread into the bottom plate near each of its four corners. The cube plates include tapped threaded holes for access on the outside of the plates, for easy mounting of support feet or pedestals to optic tables. Components included in the cube support kit are: Qty 4 each, Rubber Vibration Support Feet Qty 4 each, Bolts Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P107297
Price: ₺410.28
USB 2.0 to RS-485 Cable Adapter with Terminal Block Changer. This cable connects to a USB 1.1 or higher port on a computer and provides a serial com port that can be configured to work with RS-485 devices. When connected to a USB 2.0 port it supports data transfer rates of up to 3 MBaud. No external power supply is needed. This adapter can plug directly into Ideal Vacuum’s Heavy Duty Heater Controller to provide programming and serial control without the use of the included breakout board. However, the breakout board can be used to regain access to the relay functionality. The breakout board may also be used with other devices that do not follow the same RS-485 DB-9 pinout convention.
Condition: New
Part Number: P1012591
Price: ₺3,521.95
Ideal Vacuum Cube, Vacuum Chamber Hinge Assembly & Hardware to convert 6x6, 9x9 and 12x12 Plates Into a Door.Quick and Easy To Install, 6061-T6 Aluminum Alloy These Ideal Vacuum Cube vacuum chamber Hinge assemblies can be used to transform a standard vacuum cube plate into an operable door. These hinges are designed to fit 6x6 (Qty 1 required per plate), 9x9 (Qty 1 required per plate) and 12x12 (Qty 2 required per plate) Vacuum Cube Plates. These Vacuum Cube hinges are CNC milled from a single block of lightweight 6061-T6 Aluminum Alloy. This is the sale of an Ideal Vacuum Cube hinge assembly only (other plates, frame, and hardware are required and sold separately). Ideal Vacuum Cube IntroductionOur Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4"-20 mounting threads on a standard 1" optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and VersatilityThe large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical DetailsPatent-Pending Chamber SystemOur Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building BlocksIdeal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and AccessoriesThe Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum CubesOur Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P106868
Price: ₺4,209.44
Ideal Vacuum Cube, Vacuum Chamber Hinge Assembly & Hardware to convert 6x6, 9x9 and 12x12 Plates Into Side By Side Door Plates.Quick and Easy To Install, 6061-T6 Aluminum Alloy. These Ideal Vacuum Cube vacuum chamber Hinge assemblies can be used to transform two plates into side by side door plates. These hinges are designed to fit 6x6 (Qty 1 required per plate), 9x9 (Qty 1 required per plate) and 12x12 (Qty 2 required per plate). These Vacuum Cube hinges are CNC milled from a single block of lightweight 6061-T6 Aluminum Alloy. This is the sale of an Ideal Vacuum Cube hinge assembly only (other plates, frame, and hardware are required and sold separately).Ideal Vacuum Cube IntroductionOur Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4"-20 mounting threads on a standard 1" optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and VersatilityThe large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical DetailsPatent-Pending Chamber SystemOur Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building BlocksIdeal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and AccessoriesThe Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum CubesOur Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1011325
Price: ₺4,209.44
New 90 Degree Angle Bracket for Vacuum Cube Side Mounting Feet and Instruments, PN: VC-01-802 These 90 Degree Angle Brackets are used for offsetting mounting points from the bottom of a Vacuum Cube modular vacuum chamber, to the side. Benefits include easier access to bottom plate removal and greater stability. These side mounted brackets should be used with Ideal Vacuum vibration isolating rubber feet for bench-top use (P107297), or with any standard standoff post.
Condition: New
Part Number: P1010061
Price: ₺761.57
Ideal Vacuum Cube Replacement Viton Sealing O-ring, Designed For Sealing 6x6 Vacuum Cube Plates Quick and Easy To Install, Made With Viton Rubber Elastomer These vacuum cube replacement o-ring seals are used to create a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They also replacement vacuum seals for our multicube coupling seal connector. They are made of Viton and can be baked up to 150 degrees Celsius (being sold individually). Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P107295
Price: ₺316.09
Ideal Vacuum Cube Replacement Silicone Sealing O-ring, Designed For Sealing 6x6 Vacuum Cube Plates. These replacement silicone O-rings are used on the 6x6 Ideal Vacuum Cube modular chamber system plates. They are are used to create a vacuum tight seal between the cube frame and plate. These silicone O-rings can be baked up to 210 degrees Celsius without permanent deformation, so are the best choice for researchers who require regular Cube reconfiguration while also needing to regularly bakeout the Cube chamber. Silicone O-rings are somewhat more permeable than Viton, but still can achieve medium high vacuum in the range of 10-6 Torr. Sold per each. Ideal Vacuum Cube IntroductionOur Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and VersatilityThe large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical DetailsPatent-Pending Chamber SystemOur Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building BlocksIdeal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and AccessoriesThe Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum CubesOur Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1012316
Price: ₺397.88
Ideal Vacuum Cube Replacement Viton Sealing O-ring, Designed For Sealing 6x12 Vacuum Cube Plates Quick and Easy To Install, Made With Viton Rubber Elastomer These vacuum cube replacement o-ring seals are used to create a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They are made of Viton and can be baked up to 150 degrees Celsius (being sold individually). Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P108339
Price: ₺463.92
Ideal Vacuum Cube Replacement Silicone Sealing O-ring, Designed For Sealing 6x12 Vacuum Cube Plates. These replacement silicone O-rings are used on the 6x12 Ideal Vacuum Cube modular chamber system plates. They are are used to create a vacuum tight seal between the cube frame and plate. These silicone O-rings can be baked up to 210 degrees Celsius without permanent deformation, so are the best choice for researchers who require regular Cube reconfiguration while also needing to regularly bakeout the Cube chamber. Silicone O-rings are somewhat more permeable than Viton, but still can achieve medium high vacuum in the range of 10-6 Torr. Sold per each. Ideal Vacuum Cube IntroductionOur Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and VersatilityThe large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical DetailsPatent-Pending Chamber SystemOur Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building BlocksIdeal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and AccessoriesThe Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum CubesOur Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1012314
Price: ₺433.41
Ideal Vacuum Cube Replacement Viton Sealing O-ring, Designed For Sealing 9x9 Vacuum Cube Plates Quick and Easy To Install, Made With Viton Rubber Elastomer These vacuum cube replacement o-ring seals are used to create a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They are made of Viton and can be baked up to 150 degrees Celsius (being sold individually). Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1010490
Price: ₺392.18
Ideal Vacuum Cube Replacement Silicone Sealing O-ring, Designed For Sealing 9x9 Vacuum Cube Plates. These replacement silicone O-rings are used on the 9x9 Ideal Vacuum Cube modular chamber system plates. They are are used to create a vacuum tight seal between the cube frame and plate. These silicone O-rings can be baked up to 210 degrees Celsius without permanent deformation, so are the best choice for researchers who require regular Cube reconfiguration while also needing to regularly bakeout the Cube chamber. Silicone O-rings are somewhat more permeable than Viton, but still can achieve medium high vacuum in the range of 10-6 Torr. Sold per each. Ideal Vacuum Cube IntroductionOur Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and VersatilityThe large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical DetailsPatent-Pending Chamber SystemOur Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building BlocksIdeal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and AccessoriesThe Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum CubesOur Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1012315
Price: ₺433.41
Ideal Vacuum Cube Replacement Viton Sealing O-ring, Designed For Sealing 12x12 Vacuum Cube Plates Quick and Easy To Install, Made With Viton Rubber Elastomer These vacuum cube replacement o-ring seals are used to create a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They are made of Viton and can be baked up to 150 degrees Celsius (being sold individually). Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P108428
Price: ₺1,582.14
Ideal Vacuum Cube Replacement Silicone Sealing O-ring, Designed For Sealing 12x12 Vacuum Cube Plates. These replacement silicone O-rings are used on the 12x12 Ideal Vacuum Cube modular chamber system plates. They are are used to create a vacuum tight seal between the cube frame and plate. These silicone O-rings can be baked up to 210 degrees Celsius without permanent deformation, so are the best choice for researchers who require regular Cube reconfiguration while also needing to regularly bakeout the Cube chamber. Silicone O-rings are somewhat more permeable than Viton, but still can achieve medium high vacuum in the range of 10-6 Torr. Sold per each. Ideal Vacuum Cube IntroductionOur Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and VersatilityThe large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical DetailsPatent-Pending Chamber SystemOur Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building BlocksIdeal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and AccessoriesThe Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum CubesOur Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1012317
Price: ₺1,048.51
Ideal Vacuum Cube Silicone Sealing O-ring, Designed For Sealing 6x12 Vacuum Chamber Glove-Box Adapter Plates. These silicone O-rings are used on the 6x12 Ideal Vacuum Cube Glove Box adapter plates (part number P1011467) only. They are are used to create a vacuum tight seal between the cube frame and plate. These silicone O-rings can be baked up to 210 degrees Celsius without permanent deformation, so are the best choice for researchers who require regular Cube reconfiguration while also needing to regularly bakeout the Cube chamber. Silicone O-rings are somewhat more permeable than Viton, but still can achieve medium high vacuum in the range of 10-6 Torr. Sold per each. Ideal Vacuum Cube IntroductionOur Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and VersatilityThe large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical DetailsPatent-Pending Chamber SystemOur Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building BlocksIdeal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and AccessoriesThe Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum CubesOur Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1012327
Price: ₺392.18
O-Ring Removal Tool, Non Scratch Polycarbonate, Keeps O-Ring Seals and Grooves from Damage This O-ring removal tool, made of non scratch, tough polycarbonate plastic, allows you to remove O-rings from the groove without damaging either the O-ring seal or the groove. This 5-1/2" long, nearly unbreakable tool has a prying tip on one end, and a hook on the other which allows you to remove even the most stubborn O-rings, even in hard-to-reach places. This tool is a must have in your toolbox! We recommended it for installation, maintenance and service on the Ideal Vacuum Cube modular chamber system, or with any vacuum component. Note: Color may vary.
Condition: New
Part Number: P1010547
Price: ₺186.37
Ideal Vacuum Cube Viewing Window Assembly Maintenance and Service Tool Kit This simple toolkit includes a 9/64" hex key wrench and an O-ring removal tool. It is a perfect little tool kit for maintaining and servicing ALL Ideal Vacuum Cube Viewing Window Assemblies; 6x6, 6x12, 9x9 and 12x12. Use it when disassembling the standard glass for cleaning, for periodic tightening, when replacing the O-ring window pane seal, or when replacing the standard tempered glass with fused quartz or fused silica material. This is a simple yet essential tool kit for maintaining and servicing the Ideal Vacuum Cube Viewing Window Assembly. Please see our other tool kits for a Cube plate mounting tool kit, or for our complete Cube maintenance and service tool kit which has all the tools needed for proper Cube assembly, disassembly, maintenance and repair.
Condition: New
Part Number: P1010555
Price: ₺675.76
Ideal Vacuum Cube Plate Maintenance and Service Tool Kit This simple and inexpensive toolkit includes a 3/16" hex key wrench and an O-ring removal tool. It is a perfect little tool kit for installing, maintaining and servicing ALL Ideal Vacuum Cube side or door plates, whether they be ported or not. Use these essential tools when mounting sides to the Cube, or when replacing O-ring seals. These tools work for all 6x6, 6x12, 9x9 and 12x12 Cubes; rectangular, hexagonal or octagonal chambers. Please see our other tool kits for a complete essential Cube maintenance and service tool kit, which has all the tools needed for proper Cube assembly, disassembly, maintenance and repair.
Condition: New
Part Number: P1010554
Price: ₺675.76
Ideal Vacuum Cube Essential Maintenance and Service Tool Kit This tool kit has everything you need to assemble, disassemble, maintain, service and repair all Ideal Vacuum Cube modular chambers. Includes: 13 pc. Hex key wrench set (inch sizes from 0.050" to 3/8", U.S.A) 7/16" polished combination wrench (for Cube coupling) O-Ring Removal Tool (non scratch polycarbonate, for all O-ring seals) 2 pair of Large Nitrile gloves (use when working on any vacuum component) We’ve gathered all the essential tools you need and packaged them in their own snap close polypropylene box that fits comfortably in your vacuum service tool box, or a desk drawer. Use these essential tools when assembling or installing a Cube for the first time, or when performing routine maintenance, cleaning, and seal replacement. These tools work for all 6x6, 6x12, 9x9 and 12x12 Cubes; rectangular, hexagonal or octagonal chambers, and all accessories that use hex head bolts or screws for attachment to the Cube system (valves, flanges, etc.). This inexpensive tool kit is a must have for all Ideal Vacuum Cube modular chamber system users. Dimensions: 8-3/8" x 3-5/8" x 2". Color may vary.
Condition: New
Part Number: P1010558
Price: ₺1,372.64
Ideal Vacuum Cube Hardware Kit, Designed For 6x6x6 Cubes, Includes Viton O-rings And Plate Bolts Quick and Easy To Install, Made Viton O-rings And 8-18 Stainless Steel Bolts These vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 6x6x6 vacuum cubes. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They also replacement vacuum seals for our multicube coupling seal connector. The bolts are used for fastening down the plates to the cube frame. The o-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. Components included in the Hardware Kit for Cube 6x6 Plates Qty 12 each, Viton O-ring for 6x6 Cube Plate Qty 48 each, 1/4-20 SHCS Bolts for Plate Mounting, 18-8 Stainless Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P107293
Price: ₺1,856.00
Ideal Vacuum Cube Hardware Kit, Designed For 6x12x12 Cubes, Includes Viton O-rings And Plate Bolts Quick and Easy To Install, Made Viton O-rings And 8-18 Stainless Steel Bolts These vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 6x12x12 vacuum cubes. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They also replacement vacuum seals for our multicube coupling seal connector. The bolts are used for fastening down the plates to the cube frame. The o-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. Components included in the Hardware Kit for Cube 6x12 and 12x12Plates Qty 8 each, Viton O-ring for 6x12 Cube Plate Qty 4 each, Viton O-ring for 12x12 Cube Plate Qty 84 each, 1/4-20 SHCS Bolts for Plate Mounting, 18-8 Stainless, 2 sets of O-Rings Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1010078
Price: ₺3,918.49
Ideal Vacuum Cube Hardware Kit, Designed For 6x6 Hexagonal Frame, Includes Viton O-rings And Bolts Quick and Easy To Install, Made Viton O-rings And 8-18 Stainless Steel Bolts These vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 6x6 hexagonal frames. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They also replacement vacuum seals for our multicube coupling seal connector. The bolts are used for fastening down the plates to the cube frame. The o-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. Components included in the Hardware Kit for Cube 6x6 Plates Qty 16 each, Viton O-ring for 6x6 Cube Plates Qty 64 each, 1/4-20 SHCS Bolts for Plate Mounting, 18-8 Stainless Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help to make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as Conflat CF, KF/NW, or ISO-LF (large flange), which is easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system. The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted with feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conflat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to be incorporated into optics laboratories for quick installation in laser research applications. The modular design of our Ideal Vacuum Cubes makes them suitable for many vacuum chamber applications, including the following: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1010684
Price: ₺2,572.66
Ideal Vacuum Cube Hardware Kit, Designed For 9x9x9 Cubes, Includes Viton O-rings And Plate Bolts Quick and Easy To Install, Made Viton O-rings And 8-18 Stainless Steel Bolts These vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 9x9x9 vacuum cubes. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They also replacement vacuum seals for our multicube coupling seal connector. The bolts are used for fastening down the plates to the cube frame. The o-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. Components included in the Hardware Kit for Cube 9x9 Plates Qty 12 each, Viton O-ring for 9x9 Cube Plate Qty 48 each, 1/4-20 SHCS Bolts for Plate Mounting, 18-8 Stainless Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P109824
Price: ₺2,680.93
Ideal Vacuum Cube High-Temperature Chemical-Resistant Hardware Kit, Designed For 6x6x6 CubesMade With High-Temperature And Chemical-Resistant Kalrez O-rings And 8-18 Stainless Steel BoltsThese high-temperature and chemical-resistant vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 6x6x6 vacuum cubes. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They also replacement vacuum seals for our multicube coupling seal connector. The socket cap screws are used for fastening down the plates to the cube frame and are made of 18-8 stainless steel. The o-rings are made of Kalrez material and can be baked up to 275° C.Note: Making use of the high-temperature capabilities of these Kalrez o-ring replacement kits will require the use of uncoated, bare-metal 6x6 plates. The blue powder coated plates will not withstand repeated exposures to temperatures above 150° C without fading and discoloration.Components included in the Hardware Kit for Cube 6x6 Plates Qty 6 each, Kalrez Chemical-Resistant And High-Tempurature O-rings for 6x6 Cube Plate Qty 48 each, 1/4"-20 SHCS Bolts for Plate Mounting, 18-8 Stainless Ideal Vacuum Cube IntroductionOur Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4"-20 mounting threads on a standard 1" optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and VersatilityThe large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical DetailsPatent-Pending Chamber SystemOur Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building BlocksIdeal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and AccessoriesThe Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum CubesOur Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P107294
Price: ₺65,414.95
Ideal Vacuum Cube Hardware Kit, Designed For 6x6x12 Cubes, Includes Viton O-rings And Plate Bolts Quick and Easy To Install, Made Viton O-rings And 8-18 Stainless Steel Bolts These vacuum cube hardware kits are designed to be used as replacement parts for 6x6x12 vacuum cubes. The O-ring forms the vacuum tight seal between the cube frame and plate. Both 6x12 and 6x6 O-ring seals are installed on the inner sealing groove of the plate. The 6x6 O-rings can also replace the vacuum seals of our multicube coupling connector. The bolts are used for fastening the plates to the cube frame and, ultimately, for seating the O-ring in its taper-seal surface. The O-rings are made of Viton and can be baked up to 150° C. The socket head cap screws (SHCS) are made of 18-8 stainless steel. Components included in the Hardware Kit for the 6x6x12 Cube Qty 4 each, Viton O-ring for 6x6 Cube Plate Qty 8 each, Viton O-ring for 6x12 Cube Plate Qty 72 each, 1/4-20 SHCS Bolts for Plate Mounting, 18-8 Stainless Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P108338
Price: ₺3,918.49
Ideal Vacuum Cube Hardware Kit, Designed For 6x6x12 Hexagonal Chambers, Includes Viton O-rings And Plate Bolts Quick and Easy To Install, Viton O-rings And 8-18 Stainless Steel Bolts These vacuum cube hardware kits are designed to be used as replacement parts for 6x6x12 tall hexagonal vacuum chambers. The O-ring forms the vacuum tight seal between the cube frame and plate. Both 6x12 and 6x6 O-ring seals are installed on the inner sealing groove of the plate. The 6x6 O-rings can also replace the vacuum seals of our multicube coupling connector. The bolts are used for fastening the plates to the cube frame and, ultimately, for seating the O-ring in its taper-seal surface. The O-rings are made of Viton and can be baked up to 150° C. The socket head cap screws (SHCS) are made of 18-8 stainless steel. Components included in the Hardware Kit for the 6x6x12 Hexagonal Vacuum Chamber Qty 4 each, Viton O-ring for 6x6 Cube Plate Qty 12 each, Viton O-ring for 6x12 Cube Plate Qty 88 each, 1/4-20 SHCS Bolts for Plate Mounting, 18-8 Stainless Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P1010079
Price: ₺3,918.49
Ideal Vacuum Cube Hardware Kit, Designed For 12x12x12 Cubes, Includes Viton O-rings And Plate Bolts Quick and Easy To Install, Made Viton O-rings And 8-18 Stainless Steel Bolts These vacuum cube hardware kits are designed to be used as replacement parts, including o-ring seals and plate mounting bolts for 12x12x12 vacuum cubes. The o-ring form a vacuum tight seal between the cube frame and plate. These o-ring seals are installed on the inner sealing groove of the plate. They also replacement vacuum seals for our multicube coupling seal connector. The bolts are used for fastening down the plates to the cube frame. The o-rings are made of Viton and can be baked up to 150 degrees Celsius. The socket head cap screws (SHCS) are made of 18-8 stainless steel. Components included in the Hardware Kit for Cube 12x12 Plates Qty 12 each, Viton O-ring for 12x12 Cube Plate Qty 120 each, 1/4-20 SHCS Bolts for Plate Mounting, 18-8 Stainless Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patent-pending seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patent-Pending Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P108176
Price: ₺6,145.56
1/4-20 x 1/4" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 1/4" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 1/4" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1012242
Price: ₺40.22
1/4-20 x 5/16" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 5/16" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 5/16" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1012243
Price: ₺40.22
1/4-20 x 3/8" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 3/8" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 3/8" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P108310
Price: ₺44.58
1/4-20 x 1/2" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 1/2" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 1/2" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P108311
Price: ₺50.28
8-32 x 3/4 Inch Vacuum Vented Socket Head Cap Screws, 8-32 Thread Size by 3/4" Long, 304 Stainless Steel, Sold as Each. These 8-32 x 3/4" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013329
Price: ₺60.67
8-32 x 5/8 Inch Vacuum Vented Socket Head Cap Screws, 8-32 Thread Size by 5/8" Long, 304 Stainless Steel, Sold as Each. These 8-32 x 5/8" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013328
Price: ₺53.30
1/4-20 x 3/4" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 3/4" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 3/4" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013321
Price: ₺77.10
8-32 x 5/16" Vacuum Vented Socket Head Cap Screws, 8-32 Thread Size by 5/16" Long, 304 Stainless Steel, Sold as Each. These 8-32 x 5/16" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013325
Price: ₺35.20
1/4-20 x 5/8" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 5/8" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 5/8" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P108312
Price: ₺66.03
8-32 x 1 Inch Vacuum Vented Socket Head Cap Screws, 8-32 Thread Size by 1" Long, 304 Stainless Steel, Sold as Each. These 8-32 x 1" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013331
Price: ₺67.71
8-32 x 7/8 Inch Vacuum Vented Socket Head Cap Screws, 8-32 Thread Size by 7/8" Long, 304 Stainless Steel, Sold as Each. These 8-32 x 7/8" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013330
Price: ₺67.71
1/4-20 x 1" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 1" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 1" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013323
Price: ₺100.56
1/4-20 x 7/8" Vacuum Vented Socket Head Cap Screws, 1/4-20 Thread Size by 7/8" Long, 304 Stainless Steel, Sold as Each. These 1/4-20 x 7/8" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013322
Price: ₺88.83
8-32 x 3/8" Vacuum Vented Socket Head Cap Screws, 8-32 Thread Size by 3/8" Long, 304 Stainless Steel, Sold as Each. These 8-32 x 3/8" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013326
Price: ₺35.53
8-32 x 1/2 Inch Vacuum Vented Socket Head Cap Screws, 8-32 Thread Size by 1/2" Long, 304 Stainless Steel, Sold as Each. These 8-32 x 1/2" long vacuum vented socket head cap screws (SHCS) are drilled through the head and shaft to vent fluid and gases trapped below the screw, making them necessary for vacuum applications. These vented scews are sold by the piece (1 each). When used as vacuum fasteners inside a vacuum chamber, typical solid shaft (unvented) screws trap gases in the void space between the screw tip and the bottom of the threaded hole. These trapped gases are slowly released into the evacuated chamber thus creating what is known as a virtual leak. Virtual leaks slow down pumping processes and can significantly prolong the time needed to reach the desired base pressure. These vented screws, also known as vacuum screws, help eliminate virtual leaks from high vacuum (HV) and ultra-high (UHV) systems. Our vacuum compatible vented screw fasteners have been drilled through the entire length of their shaft allowing these trapped gases to vent out. These screws are non-magnetic and made of chemical and corrosion resistant 304 stainless steel. The screw length is measured from under the head (length of shaft only). We know that selecting the correct vacuum hardware for your vacuum system can seem like a challenging process. To make buying easier we sell the hardware individually by the bolt specifications (bolt diameter, thread type, and length), or in prepackaged hardware sets tailored for specific applications, such as for connecting ISO, CF (Conflat), or ASA flanges, or for connecting vacuum valves. Links to bolt sets for some selected applications: Bolt Sets For ASA Vacuum Flanges Bolt Sets For Conflat (CF) Vacuum Flanges Bolt Sets For ISO-F (ISO LFB) Vacuum Flanges Bolt Sets For Vacuum Valves Bolt Sets For Ideal Vacuum Cubes Please send us an email if you are looking to order large quantities of fasteners or other hardware. We can offer substantial discounts for bulk orders. If you cannot find the particular hardware you need, please send us an email and we will quote it for you: fasteners@idealvac.com
Condition: New
Part Number: P1013327
Price: ₺35.53
Bolt Kit For 1.33 In. Conflat Tapped Bolt Hole Flanges, Silver-Plated Allen Bolts With Washers.These bolt kits contain silver-plated Allen head bolts and washers to fasten tapped hole 1.33 (1-1/3) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250.Complete Kit - 1.33 (1-1/3) inch Conflat Tapped Bolt Hole Fasteners: QTY 6, Silver-Plated 8-32 x 0.50 Inch Long Allen Bolts QTY 6, Washers
Condition: New
Part Number: P104402
Price: ₺1,111.52
Bolt Kit For 2.75 (2-3/4) In. Conflat Tapped Bolt Hole Flanges, Silver-Plated Allen Bolts With Washers.These bolt kits contain silver-plated 12-Point head bolts and washers to fasten tapped hole 2.75 (2-3/4) inch CF Conflat flanged fittings. These confalt flages can be pumped down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2-1/8, 2-3/4, 4-1/2, 4-5/8, 6, 6-3/4, 8, 10, 12, 13-1/4, 14 and 16-1/2. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250.Complete Kit - 2.75 (2-3/4) inch Conflat Tapped Bolt Hole Fasteners: QTY 6, Silver-Plated 1/4-28 x 0.875 Inch Long 12-Point Head Bolts QTY 6, Washers
Condition: New
Part Number: P104404
Price: ₺1,193.98
Bolt Kit for Ideal Vacuum Cube Plates with CF 3.375 or 4.5 Conflat Port, Eight Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0. This hardware kit is specifically for Ideal Vacuum Cube plates that have a Conflat 3.375 or 4.5 port with tapped bolt threads. The kit consists of eight (8) silver-plated, 12-point bolts, 5/16-24 x 1.0, and eight (8) stainless steel washers. The 1.0 screws are slightly shorter than the bolts typically used to connect two CF flanges together. The silver-plating on the bolts keeps them from galling and makes them easily removed and replaced when changing vacuum plumbing configurations. This kit consists of: 8 ea. silver-plated, 12 point, 5/16-24 x 1.0 bolts 8 ea. 304 stainless steel washers
Condition: New
Part Number: P1012250
Price: ₺1,482.59
Bolt Kit for Ideal Vacuum Cube Plates with CF 6.0 Conflat Port, Sixteen Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0. This hardware kit is specifically for Ideal Vacuum Cube plates that have a Conflat 6.0 port with tapped bolt threads. The kit consists of sixteen (16) silver-plated, 12-point bolts, 5/16-24 x 1.0, and sixteen (16) stainless steel washers. The 1.0 screws are slightly shorter than the bolts typically used to connect two CF flanges together. The silver-plating on the bolts keeps them from galling and makes them easily removed and replaced when changing vacuum plumbing configurations. This kit consists of: 16 ea. silver-plated, 12 point, 5/16-24 x 1.0 bolts 16 ea. 304 stainless steel washers
Condition: New
Part Number: P1012251
Price: ₺2,961.16
Bolt Kit for Ideal Vacuum Cube Plates with CF 8.0 Conflat Port, Twenty Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0. This hardware kit is specifically for Ideal Vacuum Cube plates that have a Conflat 8.0 port with tapped bolt threads. The kit consists of twenty (20) silver-plated, 12-point bolts, 5/16-24 x 1.0, and twenty (20) stainless steel washers. The 1.0 screws are slightly shorter than the bolts typically used to connect two CF flanges together. The silver-plating on the bolts keeps them from galling and makes them easily removed and replaced when changing vacuum plumbing configurations. This kit consists of: 20 ea. silver-plated, 12 point, 5/16-24 x 1.0 bolts 20 ea. 304 stainless steel washers
Condition: New
Part Number: P1012252
Price: ₺3,701.28
Bolt Kit for Ideal Vacuum Cube Plates with CF 10.0 Conflat Port, Twenty-Four Silver-Plated, 12-Point Bolts With Washers, 5/16-24 x 1.0. This hardware kit is specifically for Ideal Vacuum Cube plates that have a Conflat 10.0 port with tapped bolt threads. The kit consists of twenty-four (24) silver-plated, 12-point bolts, 5/16-24 x 1.0, and twenty-four (24) stainless steel washers. The 1.0 screws are slightly shorter than the bolts typically used to connect two CF flanges together. The silver-plating on the bolts keeps them from galling and makes them easily removed and replaced when changing vacuum plumbing configurations. This kit consists of: 20 ea. silver-plated, 12 point, 5/16-24 x 1.0 bolts 20 ea. 304 stainless steel washers
Condition: New
Part Number: P1012253
Price: ₺4,441.74
Ideal Vacuum Cube Cooling Plate Adapter Kit This cooling plate adapter kit is used to connect 2 Ideal Vacuum Cube 12x12 cooling plates to one Thermo Scientific Neslab model Arctic, AC200 A25, AC200 A40, or Accel 500LT cooler. The kit branches the main cooling line off to a secondary cooling plate attached to a second 12x12 Ideal Vacuum Cube, allowing both chambers to be chilled in conjunction with one single chiller. This cooling plate adapter kit comes with: 5ft length of 1/2 ID insulated hose (x2) 3/8 x 1/2 OD tube adapters (x2) 1/2 x 1/2 x 1/2 OD Stainless Steel Barbed Tee (x2) #10 Stainless Steel Clamps (x4)
Condition: New
Part Number: P109032
Price: ₺30,160.63
Ideal Vacuum Heavy Duty 20A, 2400W, Single Zone PID Heater Control System, 100-240 VAC, 1 Setpoint, RS485 ModbusThis Ideal Vacuum Heavy Duty, single zone 20A PID heater control system is designed to accurately measure and control the temperature of our conflat flange ThinBand nozzle heaters, Ideal Vacuum Cube heater plates, and other vacuum heater and chiller units in real time. The heater control operates at 100-240 VAC and can handle heaters up to 20A. The controller uses a type K thermocouple (sold separately). Temperature is monitored either directly on the heater control’s front panel, or via RS485/Modbus (DB9 female connector) remotely by a computer. Temperature is controlled by a user programmable set point. Two set point relays, wired through the DB9 connector, are available to activate other equipment (i.e., valve solenoids) when the set point is reached. These set point relays are rated for 1A maximum. The PID has many relay configurations which can be programmed according to the user ‘s requirements. The control system is housed in a strong and attractive ¼ DIN brushed aluminum enclosure. Hardware is included for table top use or panel mounting. Cutout for ¼ DIN panel mounting is 92mm x 92 mm (3.62x3.62 in.). Safety features include an over temperature audible alarm, and a thermal circuit breaker incorporated into the main power switch. This Ideal Vacuum Heavy Duty heater control system includes a robust 12 gauge input power cable with a 5-20P (20A) plug. The package also includes a C19 power entry plug (male C19) for wiring to a heater. Additional C19 power entry plugs are available (P1011284) to connect to different heaters without rewiring. A splitter kit (P1011285) is also available (C19 male plug to dual C20 female connectors), which allows the simultaneous connection of two heaters to the system (2400W total @120 VAC, 4800W total @240 VAC). Please see part number P1011963 for a 15A, 10 ft. long power Cord with NEMA 5-15P plug (standard 110V plug). Note: This system may also be powered on 208/240 VAC (50/60 Hz). Heaters must be rated for the same voltage as the input voltage. At 240 VAC, the total allowable heater load is 20A (4800W). For 240 VAC use, the user must supply their own power cord. Please see the downloads for the PID Quick Start directions and controller manual.
Condition: New
Part Number: P107361
Price: ₺53,772.78
Regular Price: ₺71,696.93
Power Cord, NEMA 5-15P to IEC 320-C19, 10 Ft., SJT, 14 AWG, 15A, 1800W, used with Ideal Vacuum PID Heater Controller, P107361. This is a 10 ft. power cord with an IEC 320-C19 plug on one end (standard computer type power plug) and a NEMA 5-15P standard house type 120 VAC power plug on the other. The cord is 14 ga. and SJT rated (300V max). It can be used on any equipment that requires a C19 power plug, for example our PID Heater Controller, model P107361, for heaters that draw 15A or less, or on XDS35i scroll pumps.
Condition: New
Part Number: P1011963
Price: ₺2,144.94
Spare Power Entry Plug, Male C20, Connects heater to Ideal Vacuum Heater Control Systems. This is a spare C20 power entry plug which connects a heater to the Ideal Vacuum Heater Control System (P107361). Using 12 gauge wire, these power plugs are rated for heater loads of up to 2400W at 120 VAC, and 4800W at 240 VAC. These spare C20 power plugs allow a user to pre-wire an additional heater. Users will enjoy the time savings and convenience of having multiple heaters prepped for use in systems requiring different configurations. Note: Heaters must be rated for the same voltage as the input voltage.
Condition: New
Part Number: P1011284
Price: ₺774.65
Splitter Kit for Using Dual Heaters with Ideal Vacuum PID Plug & Play Heater Control Systems, C19 Male Plug to two C20 Female ConnectorsThis splitter adapter kit allows two heaters to be connected simultaneously to the Ideal Vacuum PID Plug & Play Heater Control System. For systems requiring multiple heaters for better heat distribution, or in multiple locations, this is the solution. The splitter is rated for total heater loads of 20A@120 VAC (2400W) and 16A@240 VAC (3800W). The kit includes the block splitter connector and two C19 power entry plugs (P1011284).
Condition: New
Part Number: P1011285
Price: ₺2,836.46
Conflat Vacuum Fittings Bakeout Surface Mount K-Type Thermocouple, Response Times < 0.15 Seconds.Provides Temperature Feedback For Our Ideal Vacuum Heater Control System P/N P1011283 and P107361. These self-adhering mount K-Type thermocouples provide a rapid response (less than 0.15 seconds) and can be operated up to temperatures of 260°C (500°F) or can be cemented in place for use at temperatures up to 315°C (600°F). They use a polyimide and fiberglass junction insulation along with a fiberglass-insulated lead wire and require a patch length 1" by 0.375" width. It is important that the thermocouple be securely connected to the part being heated at all times so that good thermal contact in achieved during the complete bakeout cycle. Caution, if the thermocouple loses contact with the fitting, the temperature controller will measure a much lower temperature of the room air. This will result in a dangerously high run away heating of the vacuum-flanged fitting. We recommend that these thermocouples be directly adhered to the outer surface of the flange with the band nozzle heater installed over the thermocouple. This procedure will clamp the thermocouple onto the heated conflat flange. Information On Our Plug & Play PID Heater Control SystemsOur single zone PID heater control systems (P1011283) and (P107361) are designed to accurately measure and control the temperature of our conflat flange ThinBand nozzle heaters, as well as Ideal Vacuum Cube heater plates, and other vacuum heater and chiller units in real time. These heater control systems can operate at 120 or 240VAC with single or multiple heater loads up to 20A (2400W@120VAC, 4800W@240VAC). Information On Our Conflat Nozzle Type Band HeatersThese conflat 2.75 (2-3/4) inch nozzle heaters are designed to be tightened around the outer surface of the conflat flange. The thermal energy from the bakeout process helps desorb layers of water vapor in vacuum chambers allowing the molecular water vapor to be pumped away leading to a much quicker pump down time for ultra-high vacuum (UHV) applications. These conflat flange bakeout nozzle heaters are a low-cost solution to more expensive CF heating jackets. These conflat thin band nozzle heaters have a 2.75-inch inner diameter by 1.0-inch width, operate on 110 to 120 VAC input power, consume 300 Watts of power. and have 18-inch flying FFG Leads. They are tightened on to the conflat flange with an integrated socket head cap screw hardware component. Conflat ultra-high vacuum metal-to-metal seal with copper gasket and stainless-steel conflat flanges allows for baking of temperatures up to 450 °C. (maximum bakeout temperature can be limited by the choice of gasket material). These nozzle heaters work directly with our heating and temperature control units which incorporate temperature measurement input for a thermocouple. These items work together to make a complete CF heating and temperature control solution. Caution - it is important to understand the risk of being burned by heated vacuum flanges. The bakeout temperature of conflat flanges and fittings can reach 450 degrees Celsius! The vacuum system operator needs to be trained correctly on how to safely work around these very hot surfaces. The links below will take you to our selection of CF heaters, Cube heater plates and thermocouples (including feedthrough types). CF Flange Bakeout HeatersIdeal Vacuum Cube Heater PlatesK Type Thermocouples
Condition: New
Part Number: P107362
Price: ₺3,739.49
Ideal Vacuum Replacement Mitutoyo Micrometer Head for Ideal Vacuum Cube Stage plate Z axis, 0.25 in travel. Mitutoyo .25 travel micrometer head with clamp nut replacement micrometer head for 6x6 Ideal Vacuum Cube Stage plate Z axis.
Condition: New
Part Number: P109401
Price: ₺5,326.33
Ideal Vacuum Replacement Mitutoyo Micrometer Head for Ideal Vacuum Cube Stage plate X or Y axis, 0.50 in travel, 1 each. Mitutoyo .50 travel micrometer head with clamp nut replacement micrometer head for 6x6 Ideal Vacuum Cube Stage plate X or Y axis.
Condition: New
Part Number: P109402
Price: ₺5,213.70
Ideal Vacuum Cube UV Fused Silica Broadband Window, AR Coated, for 6x6 Viewport Vacuum Cube Plate, 1.5 in. dia., 350-700nm Quick and Easy To Install Fused Silica Window These fused silica replacement viewports fit our 6x6 1.5 diameter viewport plates, P108316. Lens diameter of 1.5 (38.1mm); glass thickness 0.159 (4.04mm). Type A Coating, Max Bake Temperature: 150°C, Operating Wavelength: 350nm~700nm. Ideal Vacuum Cube Introduction Our Ideal Vacuum Cube is a modular high-vacuum chamber system, conceived to enable creativity and design flexibility in vacuum chamber system construction. Cubes can be stacked together into various shapes and configurations, with interchangeable plates offering a variety of features for connections, windows, and feedthroughs. Plates include 1/4-20 mounting threads on a standard 1 optical pattern for easy connection of hinges, posts, mounts, lenses, polarizers, and other accessories. Durability and Versatility The large inner dimensions and open design of Ideal Vacuum Cubes makes them perfect for many vacuum chamber applications and experiments. Vacuum Cubes are constructed of lightweight 6061-T6 aluminum alloy, allowing them to be easily transported around the lab and mounted on optical tables (unlike heavy stainless steel vacuum chambers). A patented seal protective design, stainless steel thread inserts, and powder-coated outside plate finish help make the Vacuum Cube a durable tool for even the most demanding use. Technical Details Patented Chamber System Our Ideal Vacuum Cubes have a patent pending design which features our Taper-Seal technology. Unlike other vacuum flange designs, such as, Conflat CF, KF/NW, or ISO-LF (large flange), which can be easily damaged when set on work surfaces, our Taper-Seal design protects critical sealing edges and o-rings from contact which can cause damage or contamination. Innovative Chamber Building Blocks Ideal Vacuum Cubes can easily be stacked together to build a complex, yet lightweight vacuum system (see graphic below). The outer edges of each vacuum cube feature hardware mounting sockets for easy cube-to-cube connections. A cube coupling kit includes the hardware needed to connect two cubes together. This allows scientists to creatively construct long or odd-shaped vacuum systems in a laboratory. Configurable Plates and Accessories The Vacuum Cube can be configured with a wide variety of plates and windows with many options. A Vacuum Cube can be fitted feedthroughs for electrical power, thermocouple temperature measurements, optical lasers light or imaging detectors, gas supply, or fluid flow for heat/cooling recirculation lines. Compatible standard flange styles include KF-16, KF-25, KF-40, KF-50, ISO-63, along with conlfat CF 2.75, CF 3.375, and CF 4.5 inch flanged ports. Viewing windows are also available, and custom plates can be manufactured on request. An optional hinge kit can be ordered to convert any plate into an operable door. Applications for Ideal Vacuum Cubes Our Ideal Vacuum Cubes are designed to implement well into optics laboratories for quick installation in laser research applications. The graphic below depicts an example laser spectroscopy laboratory setup, cavity ring down spectroscopy (CRDS) vacuum chamber system, using a 6x6x18 inch Ideal Vacuum Cube chamber. The modular design of our Ideal Vacuum Cubes make them suitable for many vacuum chamber applications: Vacuum Ultraviolet (VUV) Devices and Experiments Thermal Vacuum Testing Altitude Testing Vacuum Degassing Chamber High Power and Ultra Short Pulsed Lasers Research and Development Ion Acceleration RGA (Residual Gas Analyzers) Helium Leak Testing of Hermetic Sealed Devices With Welded In Helium Atmosphere Leak Detection Of Pharma Packaging Spectroscopy Molecular Ion Trap Cryostat Vacuum Chamber Beamlines Vacuum Cube Pumping Performance The pump down curves for several Ideal Vacuum Cube configurations are shown in the graphs below. A single 6x6x6 inch Cube can be pumped from atmosphere to 1x10-5 Torr in 2.5 minutes and below 1x10-6 Torr in around 15 minutes. (view curves graphic 1) close image This was accomplished using a 68 liters/second turbomolecular pump backed by a 110 liters/minute (3.3 cfm) dry scroll vacuum pump. We have also provided roughing pump down curves for popular Agilent Varian IDP-3 and SH-110 dry scroll pumps. The 6x6x6 Cube reaches base pressure of 300 mTorr for the IDP-3 (2.1 cfm) in less than 1 minute of pumping, and 50 mTorr for Agilent Varian SH-110 (3.3 cfm) in around 2 minutes. (view curves graphic 2) close image On special request we can offer fully anodized plates to help with absorption of scattered light in laser research and optical applications. Anodized components do not pump down as fast as bare aluminum metal surfaces. (view curves graphic 3) close image A single 6x6x6 with anodized plates required 1 hour of pumping to reach 1x10-5 Torr.
Condition: New
Part Number: P108318
Price: ₺12,862.63