MKS 220DD 20mmHg (20 Torr) Gen. Purpose Industrial Differential Capacitance Manometer, Temp. Controlled, ½ in. Tube, 115/230 VAC. MKS Part Number: 220DD-00020A2B. The 220DD general purpose differential capacitance manometer provides a reliable and accurate solution for measuring low differential pressures. This is a 20 Torr Full Scale gauge with ½” straight tube fitting. The unit is powered by 115 or 230 VAC (switchable) using a standard IEC 320 C14 computer style power cord (not included). The Type 220DD sensor is housed in a rugged steel NEMA 1 enclosure for ultimate protection in harsh operating environments. Temperature control provides for enhanced zero and span stability. The gauge has a useable resolution of 1 in 10,000 (0.01% of F.S) and an accuracy of +/- 0.15%.

Granville Phillips 307 Dual Thermocouple Gauge Cable Connects the 307 Controller to Two Thermocouple (TC) Gauge Sensors, 10ft Long. MKS Granville Phillips: 307054. These Granville Phillips 307 Dual Thermocouple Gauge Cable 10ft long, part number 307054, connects the 307 ion gauge controller to two separate thermocouple (TC) gauge sensors. These cable are 10ft long. Ion gauge controllers, ion gauge tubes, and thermocouple sensors are also available but sold separately.

Granville Phillips 375 Convectron Gauge Controller AC Power Supply Adapter, 115 VAC (Granville Phillips Part Number 475008-1) These Granville Phillips AC adapter power supplies are used to power a single Granville Phillips 375 controller. They have a 10 foot cable lenght and operate on 115 VAC. The Granville Phillips 375 & 275 Convectron gauges shown in photographs above are avaliable but not included at the listed price.

Granville Phillips 375 Convectron Gauge Controller Signal Cable, 3m (10 ft.) (Granville Phillips Part Number 375012-10) This Granville Phillips signal cable connects to the 375 controller and the 275 Convectron gauge sensor tube. This is the cable ONLY, the 375 controller and 275 Convectron tubes are sold separately.

MKS Vacuum Gauge Cable Connects 937B Controllers to GP275 Vacuum Gauges, 10 ft. (3m) Long. MKS Part Number: 100016980. The MKS vacuum gauge signal cable connects 937B controllers to GP275 vacuum gauges. It connects to the back of the MKS controllers and to the side of the GP275 vacuum gauges. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.

MKS Vacuum Gauge Cable Connects 937B Controllers to GP275 Vacuum Gauges, 25 ft. (7.5m) Long. MKS Part Number: 100016981. The MKS vacuum gauge signal cable connects 937B controllers to GP275 vacuum gauges. It connects to the back of the MKS controllers and to the side of the GP275 vacuum gauges. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.

AC Power Cord (only) for AC Adapter on the Granville Phillips 375 Convectron Controller, 220 VAC Australia This AC power cord connects to the GP 375 AC Adapter PN 375007-2. This is the power cord only not the adapter box and is for Australia