Agilent Varian Turbo V 1001 ターボ ポンプ パッケージには、Conflat CF 10.0 インチ インレット、TV 1001 Navigator オンボード コントローラ、および空冷キットが含まれます。

Notes on the Agilent Varian V1001 Navigator Controller
The Agilent Varian V1001 Navigator controller is designed to mount below or on the side and provide power for the Turbo-V 1001 turbo molecular pump, its cooling fan, and its vent valve. These Agilent Varian V1001 Navigator controllers are built to automatically operate on any input voltage between 100 to 240 VAC. The Agilent Varian Turbo-V 1001 Navigator turbo pump controllers also incorporate auxiliary 24 VDC power connectors for powering the cooling fan and vent valve devices through ports P4 and P3 respectively (see photo below). The turbo pump to controller cable is integral being built into the Turbo-V 1001 Navigator controller and is standard 1 foot length. A J1 connector on the side of the Navigator controller handles interlock an other logic (see photo below). A mating J1 interlock-jumped connector is provided with each new Turbo-V 1001 Navigator controller and this mating connector must be in place to close the interlock circuit and allow the pump to start after installation. There is also present a J2 serial port on the Turbo V 1001 Navigator controller which can be used to communicate with the turbo system using Agilent Varian T-Plus software (see optional accessories below).

All optional accessories, pumps, controllers, and different configurations are available from us at Ideal Vacuum Products. The user’s manual and Agilent Varian Turbo-V 1001 Navigator controller catalog brochure sections are available for download in PDF format below. Call us for all your turbo pump needs at (505) 872-0037.