6 x 6 x 6 Cubic Modular Vacuum Chamber Basic Development Kit with KF Ports, 1/8 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble basic chamber development kit with KF ports. It includes everything needed to assemble a 0.125 cu. ft. vacuum chamber including a 6 x 6 x 6 inch Cube frame, six 6 x 6 inch Cube plates, all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 6 x 6 basic chamber development kit includes: Cube frame (P106861) Cube assembly hardware kit (P107293, includes plate seals and mounting screws) Cube plate with one centered KF-25 port (P106865) Cube plate with one centered KF-40 port (P106863) Four blank plates (P106862) Rubber vibration isolating foot kit Centering rings, bulkhead clamps, and blanks for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

6 x 6 x 6 Cubic Modular Vacuum Chamber Advanced Development Kit with Viewing Window Door, KF, and ISO Ports, 1/8 Cu. Ft. This is an Ideal Vacuum Cube modular ready-to-assemble advanced chamber development kit prepped with KF-16 and ISO-F 63 ports. This kit comes with an easy-to-open door with viewing window. It includes everything needed to assemble a 0.125 cu. ft. vacuum chamber including a 6 x 6 x 6 inch Cube frame, six 6 x 6 inch Cube plates (one is a door with viewing window), all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 6 x 6 advanced chamber development kit for high vacuum includes: Cube frame (P106861) Cube assembly hardware kit (P107293, includes plate seals and mounting screws) Cube plate with four KF-16 ports (P106862) Cube plate with one ISO-F 63 port (P106864) Three blank plates (P106862) One door kit with tempered glass viewing window, hinges, and quick knobs for easy opening Rubber vibration isolating feet Centering rings, KF bulkhead and ISO claw clamps, and blanks for all ports Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

6 x 6 x 6 Cubic Modular Vacuum Chamber Heated Development Kit with Viewing Window Door and KF Ports, 1/8 Cu. Ft.. This is an Ideal Vacuum Cube modular ready-to-assemble heated chamber development kit preppes with KF-16 and KF-40 ports and an easy-to-open door with viewing window. It includes everything needed to assemble a 0.125 cu. ft. vacuum chamber including a 6 x 6 x 6 inch Cube frame, six 6 x 6 inch Cube plates (one heated and one is a door with viewing window), all necessary Viton O-ring seals, port blanks, and assembly hardware. Assembly is quick and easy and only requires a 3/16” hex wrench. Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 6 x 6 heated chamber development kit includes: Cube frame (P106861) Cube assembly hardware kit (P107293, includes plate seals and mounting screws) Cube plate with four KF-16 ports (P106866) Cube plate with one centered KF-40 port (P106863) Two blank plates (P106862) Heater plate for up to 140°C (P108319) One door kit with tempered glass viewing window, hinges, and quick knobs for easy opening Offset rubber vibration isolating foot kit Centering rings, bulkhead clamps, and blanks for all ports Note that the heater plate requires a heater plate controller such as the IVP single zone PID plug & play heater control system (P107361) Please download the Cube plate installation manual and vacuum fittings assembly guide for instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

6 x 6 x 6 Cubic Modular Vacuum Chamber Package with Edwards E2M1.5 Rotary Vane Dual Stage Vacuum Pump. This Ideal Vacuum modular Cube Package is complete with a 6 x 6 x 6 inch Vacuum Cube and a 115 VAC Edwards E2M1.5 rotary vane dual stage vacuum pump. All necessary assembly hardware and cables are included. Assembly is quick and easy and only requires a 3/16” hex wrench. The Edwards E2M1.5 pump has a base pressure of 1.1 x 10-3 Torr and a pumping speed of 1.3 cfm. This Cube package also includes a vent valve for admittance of atmospheric air into the vacuum chamber, a metal bellows roughing hose, and all the hardware needed to connect the E2M1.5 roraty vane pump to the vacuum chamber. The two included KF-25 ported plates and four blank Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 6 x 6 chamber package includes: Qty 1 each, P106861, 6 x 6 x 6 Cube frame Qty 1 each, P107293, Cube assembly hardware kit (includes plate seals and mounting screws) Qty 2 each, P106865, 6 x 6 Cube plate with centered KF-25 port Qty 4 each, P106862, 6 x 6 Cube blank plate Qty 2 each, P101243, KF-25 stainless steel centering ring with Viton O-ring Qty 2 each, P104599, KF-25 bulkhead clamp Qty 1 each, P107297, Rubber vibration isolating foot kit Roughing line accessories included: Qty 1 each, P101227, KF-25 to KF-16 conical reducer Qty 1 each, P103703, 40 inch, KF-16, thin wall metal bellows hose Qty 2 each, P101242, KF-16 stainless steel centering ring with Viton O-ring Qty 2 each, P102581, KF-16 quick clamp with ratchet closure Qty 1 each, P103899, KF-10 air admittance vent valve Qty 1 each, P101246, KF-10 to KF-16 stainless steel adaptive centering ring with Viton O-ring Rotary vane rouging pump and pressure gauge included: Qty 1 each, P101924, Edwards E2M1.5 rotary vane dual stage vacuum pump, A37132902, 115 VAC Qty 1 each, P1010252, IVP XGC320 gauge controller with 2 setpoints, XGC-321 convection-enhanced Pirani gauge, 10 ft. sensor cable, and power supply Please download the Cube plate installation manual and vacuum fittings assembly guide for assembly instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

6 x 6 x 6 Cubic Modular Vacuum Chamber Package with Edwards E2M1.5 Rotary Vane Dual Stage Roughing Pump, Convection-Enhanced Pirani Gauge, and Controller. This Ideal Vacuum modular Cube Package is complete with a 6 x 6 x 6 inch Vacuum Cube, a 115 VAC Edwards E2M1.5 rotary vane dual stage vacuum pump, Ideal Vacuum (IVP) XGC-321 convection-enhanced Pirani gauge, and XGC-320 controller. All necessary assembly hardware and cables are included. Assembly is quick and easy and only requires a 3/16” hex wrench. The Edwards E2M1.5 pump has a base pressure of 1.1 x 10-3 Torr and a pumping speed of 1.3 cfm. The included Ideal Vacuum XGC320 Pirani gauge controller and XGC-321 convection enhanced Pirani gauge sensor measures pressure from atmosphere down to 1x10-4 Torr. Cabling is included. This Cube package also includes a vent valve for admittance of atmospheric air into the vacuum chamber, a metal bellows roughing hose, and all the hardware needed to connect the E2M1.5 roraty vane pump to the vacuum chamber. The included three KF-25 ported plates and three blank Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 6 x 6 chamber package includes: Qty 1 each, P106861, 6 x 6 x 6 Cube frame Qty 1 each, P107293, Cube assembly hardware kit (includes plate seals and mounting screws) Qty 3 each, P106865, 6 x 6 Cube plate with centered KF-25 port Qty 3 each, P106862, 6 x 6 Cube blank plate Qty 3 each, P101243, KF-25 stainless steel centering ring with Viton O-ring Qty 3 each, P104599, KF-25 bulkhead clamp Qty 1 each, P107297, Rubber vibration isolating foot kit Roughing line accessories included: Qty 2 each, P101227, KF-25 to KF-16 conical reducer Qty 1 each, P103703, 40 inch, KF-16, thin wall metal bellows hose Qty 2 each, P101242, KF-16 stainless steel centering ring with Viton O-ring Qty 3 each, P102581, KF-16 quick clamp with ratchet closure Qty 1 each, P103899, KF-10 air admittance vent valve Qty 2 each, P101246, KF-10 to KF-16 stainless steel adaptive centering ring with Viton O-ring Rotary vane rouging pump and pressure gauge included: Qty 1 each, P101924, Edwards E2M1.5 rotary vane dual stage vacuum pump, A37132902, 115 VAC Qty 1 each, P1010252, IVP XGC320 gauge controller with 2 setpoints, XGC-321 convection-enhanced Pirani gauge, 10 ft. sensor cable, and power supply Please download the Cube plate installation manual and vacuum fittings assembly guide for assembly instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

6 x 6 x 6 Cubic Modular Vacuum Chamber Package with Agilent IDP-3 Dry Scroll Roughing Pump. This Ideal Vacuum modular Cube Package is complete with a 6 x 6 x 6 inch Vacuum Cube and an 115 VAC Agilent IDP-3 dry scroll vacuum pump. All necessary assembly hardware is included. Assembly is quick and easy and only requires a 3/16” hex wrench. The Agilent IDP-3 dry scroll pump has a base pressure of 250 mTorr and a pumping speed of 2.1 cfm. This Cube package also includes a metal bellows roughing hose, and all the hardware needed to connect the IDP-3 scroll pump to the vacuum chamber. The two included KF-25 ported plates and four blank Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 6 x 6 chamber package includes: Qty 1 each, P106861, 6 x 6 x 6 Cube frame Qty 1 each, P107293, Cube assembly hardware kit (includes plate seals and mounting screws) Qty 2 each, P106865, 6 x 6 Cube plate with centered KF-25 port Qty 4 each, P106862, 6 x 6 Cube blank plate Qty 2 each, P101243, KF-25 stainless steel centering ring with Viton O-ringQty 2 each, P104599, KF-25 bulkhead clamp Qty 1 each, P107297, Rubber vibration isolating foot kit Roughing line accessories included: Qty 1 each, P101227, KF-25 to KF-16 conical reducer Qty 1 each, P103703, 40 inch, KF-16, thin wall metal bellows hose Qty 2 each, P101242, KF-16 stainless steel centering ring with Viton O-ring Qty 2 each, P102581, KF-16 quick clamp with ratchet closure Qty 1 each, P101246, KF-10 to KF-16 stainless steel adaptive centering ring with Viton O-ring Dry scroll rouging pump included: Qty 1 each, P103089, Agilent IDP-3 Dry Oil-Free Scroll Vacuum Pump, IDP3B01, 115 VAC Please download the Cube plate installation manual and vacuum fittings assembly guide for assembly instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.

6 x 6 x 6 Cubic Modular Vacuum Chamber Package with Agilent IDP-3 Dry Scroll Roughing Pump, Convection-Enhanced Pirani Gauge, and Controller. This Ideal Vacuum modular Cube Package is complete with a 6 x 6 x 6 inch Vacuum Cube, a 115 VAC Agilent IDP-3 dry scroll vacuum pump, Ideal Vacuum (IVP) XGC-321 convection-enhanced Pirani gauge, and XGC-320 controller. All necessary assembly hardware and cables are included. Assembly is quick and easy and only requires a 3/16” hex wrench. The Agilent IDP-3 dry scroll pump has a base pressure of 250 mTorr and a pumping speed of 2.1 cfm. The included Ideal Vacuum XGC320 Pirani gauge controller and XGC-321 convection enhanced Pirani gauge sensor measures pressure from atmosphere down to 1x10-4 Torr. Cabling is included. This Cube package also includes a vent valve for admittance of atmospheric air into the vacuum chamber, a metal bellows roughing hose, and all the hardware needed to connect the IDP-3 scroll pump to the vacuum chamber. The included three KF-25 ported plates and three blank Cube plates can be mounted to any frame side, so the user can assemble the chamber to their own needs. An extensive number of interchangeable Cube plates are available and one or more plates can be swapped easily when chamber reconfiguration is needed. This 6 x 6 x 6 chamber package includes: Qty 1 each, P106861, 6 x 6 x 6 Cube frame Qty 1 each, P107293, Cube assembly hardware kit (includes plate seals and mounting screws) Qty 3 each, P106865, 6 x 6 Cube plate with centered KF-25 port Qty 3 each, P106862, 6 x 6 Cube blank plate Qty 3 each, P101243, KF-25 stainless steel centering ring with Viton O-ringQty 3 each, P104599, KF-25 bulkhead clamp Qty 1 each, P107297, Rubber vibration isolating foot kit Roughing line accessories included: Qty 2 each, P101227, KF-25 to KF-16 conical reducer Qty 1 each, P103703, 40 inch, KF-16, thin wall metal bellows hose Qty 2 each, P101242, KF-16 stainless steel centering ring with Viton O-ring Qty 3 each, P102581, KF-16 quick clamp with ratchet closure Qty 1 each, P103899, KF-10 air admittance vent valve Qty 1 each, P101246, KF-10 to KF-16 stainless steel adaptive centering ring with Viton O-ring Dry scroll rouging pump and pressure gauge included: Qty 1 each, P103089, Agilent IDP-3 Dry Oil-Free Scroll Vacuum Pump, IDP3B01, 115 VAC Qty 1 each, P1010252, IVP XGC320 gauge controller with 2 setpoints, XGC-321 convection-enhanced Pirani gauge, 10 ft. sensor cable, and power supply Please download the Cube plate installation manual and vacuum fittings assembly guide for assembly instructions. Use the Cube plate maintenance and service toolkit (P1010554) to assemble a Cube.