Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-at
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Ideal Vacuum XGC-320 Portable Digital Thermocouple Controllers On Sale Agilent IDP-7 Dry Scroll Vacuum Pumps On Sale Agilent TriScroll Pumps On Sale Adixen 2021C2 Pumps On Sale Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC Vacuum Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Product Image 1
Product Image 2
Product Image 3

One Inch Compression Port Aluminum Bulkhead Feedthrough Adapter, Fits 1" Hole Through, up to 1.25" Thick

Condition:
  New
Part Number:
  P105840
Warranty:
  Against Product Defect

Available Now   1  

Sale: €480.80

One Inch Compression Port Aluminum Bulkhead Feedthrough Adapter, Fits 1" Hole Through, up to 1.25" Thick 480.8
Currency: Euro (Euro)

Description

One Inch Compression Port Aluminum Bulkhead Feedthrough Adapter, Fits 1" Hole Through, up to 1.25" Thick.

These aluminum bulkhead adapter fittings are designed to fit through a 1 inch diameter hole and can be used on plates up to 1-1/4" thick. The fitting is sealed with a Viton O-ring. The compression port provides a quick vacuum connection for mounting gauges, instruments, or adding a tube port without welds. They are designed to work with round 1 inch outer diameter parts or tubing and are high vacuum rated down to the 10-8 Torr range. Included is a 2-piece, 1 inch compression plug with Viton O-ring seal which can be used to blank off the port when not in use. The bulkhead nut and washer are made of brass.

NOTICE: Brass alloys contain Zinc. Zinc will outgas from brass under certain combinations of elevated temperature and high-vacuum. System damage may occur if these conditions are present.

One Inch Aluminum Compression Port Bulkhead Adapter Data:
  • Body Material: 6061-T6 Aluminum
  • Nut and Washer Material: Brass
  • Seal: Viton O-Ring
  • Ultimate Vacuum: 10-8 Torr (High Vacuum)
  • Fits 1.0 in. OD Plate Through Hole
  • Maximum Plate Thickness: 1.25"
  • Fitting Minimum ID: 0.76 in
  • Compression Side Length = 2.0 in.
  • Compression Side OD: 1.375 in. (not including plug)
  • OAL: 4.50 in.

The bottom nut and washer are made of brass.

WARNING: Brass alloys contain Zinc. Zinc will outgas from brass under certain combinations of elevated temperature and high-vacuum. System damage may occur if these conditions are present.

1 Inch Baseplate to 1 Inch Compression Port Fitting Adapter, Aluminum Feedthrough
Common Dimensions:
A = 0.76 Inches
B = 2.00 Inches
C = 1.375 Inches
D = 4.50 Inches

Downloads

Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com



Press ESC to Close


deepbox image 2
load time = 1.6172