IdealVac XtremeFreez XFT-4 Refrigerated Vapor Trap, Stainless Steel, to -90 C, 4 liter, 120 VACThis listing is for the Ideal Vacuum XtremeFreez XFT-4, four liter refrigerated vapor trap, with digital temperature display. It protects vacuum roughing pumps from harmful vapors which can damage the pump or shorten its life. The trap uses mechanical refrigeration which is efficient, cost effective, and saves energy. It eliminates the ongoing need for expensive and potentially dangerous consummables, such as liquid nitrogen or dry ice. When vapors, such as water vapor, volatile alcohols, petrochemicals, or any other condensable gaseous compound mix with the vacuum pump’s lubricating oil, the oil breaks down, lubricity is decreased, and the pump’s lifespan is reduced. The XtremeFreez vapor trap uses two compressors in a cascading refrigeration configuration to chill the wall of a built-in, round, insulated, stainless steel vessel (trap). Refrigerant flows through copper piping wrapped around, and brazed onto the walls of the trap. The walls are cooled to -90°C. The trap is sealed by a removeable top cover plate or glass insert with two through ports. Air or gas from the chamber enters the trap through the central port. Condensable vapors with a freezing point above -90°C are condensed on the trap’s cold wall where they freeze and become ice. Remaining non-condensable vapors are pulled through the second port of the trap’s top plate and into the roughing pump’s inlet. The compact XtremeFreez vapor trap is available in two models. The XFT-4 has a 4 liter vessel, and the larger XFT-8 model has an 8 liter vessel. Applications:• Protection of oil sealed vacuum pumps• Gel drying• Evaporators• Dryers• Dehydration of gas streams Key Features:• Mechanically refrigerated• One touch operation• Small footpring • Digital temperature readout• Efficient removal of heat• 4 liter capacity

IdealVac XtremeFreez XFT-8 Refrigerated Vapor Trap, Stainless Steel, to -90 C, 8 liter, 120 VACThis listing is for the Ideal Vacuum XtremeFreez XFT-8, eight liter refrigerated vapor trap, with digital temperature display. It protects vacuum roughing pumps from harmful vapors which can damage the pump or shorten its life. The trap uses mechanical refrigeration which is efficient, cost effective, and saves energy. It eliminates the ongoing need for expensive and potentially dangerous consummables, such as liquid nitrogen or dry ice. When vapors, such as water vapor, volatile alcohols, petrochemicals, or any other condensable gaseous compound mix with the vacuum pump’s lubricating oil, the oil breaks down, lubricity is decreased, and the pump’s lifespan is reduced. The XtremeFreez vapor trap uses two compressors in a cascading refrigeration configuration to chill the wall of a built-in, round, insulated, stainless steel vessel (trap). Refrigerant flows through copper piping wrapped around, and brazed onto the walls of the trap. The walls are cooled to -90°C. The trap is sealed by a removeable top cover plate or glass insert with two through ports. Air or gas from the chamber enters the trap through the central port. Condensable vapors with a freezing point above -90°C are condensed on the trap’s cold wall where they freeze and become ice. Remaining non-condensable vapors are pulled through the second port of the trap’s top plate and into the roughing pump’s inlet. The compact XtremeFreez vapor trap is available in two models. The XFT-4 has a 4 liter vessel, and the larger XFT-8 model has an 8 liter vessel. Applications:• Protection of oil sealed vacuum pumps• Gel drying• Evaporators• Dryers• Dehydration of gas streams Key Features:• Mechanically refrigerated• One touch operation• Small footpring • Digital temperature readout• Efficient removal of heat• 4 liter capacity

Top Plate for 4 liter Vapor Trap, IVP XtremeFreez XFT-4, VT490A, 3/4 inlet, 5/8 Outlet, Stainless SteelThis is a stainless steel top plate for the Ideal Vacuum XtremeFreez XFT-4, four liter refrigerated vapor trap and FTS VT490A. Port sizes are 3/4 inch OD straight tube inlet and 5/8 inch OD straight tube outlet. Vapor Trap sold separately. Please contact our sales department if you need custom port sizes. Download the manual below for instructions.

Top Plate for 4 liter Vapor Trap, IVP XtremeFreez XFT-4, VT490A, with KF25 Inlet and KF16 Outlet Flanges, Stainless SteelThis is a stainless steel top plate for the Ideal Vacuum XtremeFreez XFT-4, four liter refrigerated vapor trap and FTS VT490A. Inlet port size is 3/4 inch OD tube with KF-25 flange. Outlet port is 5/8 inch OD tube with KF-16 flange. Vapor Trap sold separately. Please contact our sales department if you need custom port sizes. Download the manual below for instructions.

Top Plate for 8 liter Vapor Trap, IVP XtremeFreez XFT-8, VT890A, 3/4 inlet, 5/8 Outlet, Stainless SteelThis is a stainless steel top plate for the Ideal Vacuum XtremeFreez XFT-8, eight liter refrigerated vapor trap and FTS VT890A. Port sizes are 3/4 inch OD straight tube inlet and 5/8 inch OD straight tube outlet. Vapor Trap sold separately. Please contact our sales department if you need custom port sizes. Download the manual below for instructions.

Top Plate for 8 liter Vapor Trap, IVP XtremeFreez XFT-8, VT890A, with KF25 Inlet and KF16 Outlet Flanges, Stainless SteelThis is a stainless steel top plate for the Ideal Vacuum XtremeFreez XFT-8, eight liter refrigerated vapor trap and FTS VT890A. Inlet port size is 3/4 inch OD tube with KF-25 flange. Outlet port is 5/8 inch OD tube with KF-16 flange. Vapor Trap sold separately. Please contact our sales department if you need custom port sizes. Download the manual below for instructions.

Glass Insert Liner with Copper Mesh Jacket, for 4 liter Vapor Trap, IVP XtremeFreez XFT-4, VT490A, 4 Liter, 1/2 inch Inlet/Outlet This is a glass insert vessel with copper mesh heat transfer jacket for the Ideal Vacuum XFT-4 and FTS VT490A refrigerated vapor traps. The removeable cap of the insert has a titanium down tube with a 1/2 OD straight tube (inlet port). The outlet port is integral to the glass insert and is also a straight 1/2 inch OD. This option is desirable for users who need to trap corrosion causing vapors. Once the glass insert and copper mesh jacket are inserted into the trap, heat transfer fluid is used to fill the space between the glass and trap wall. Any fluid can be used, as long as its freezing point is lower than -90°C (-130°F). Ethanol or methanol is often chosen since it is inexpensive and easily obtained. Take proper precautions if using a flammable liquid as the heat transfer fluid. For instructions, please download the manual below. Note: This is the glass insert vessel with jacket only. Vapor Trap sold separately.