SWIFT-SEAL KF-16 to 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF16, NW-16, 304 Stainless Steel This adapter converts a KF-16 flanged fitting to a 0.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-16 2 = 0.52 in. (13.2 mm) 3 = 0.79 in. (19.9 mm) 4 = 1.04 in. (26.3 mm) 5 = 1.29 in. (32.7 mm)

SWIFT-SEAL KF-16 to 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF16, NW-16, 304 Stainless Steel This adapter converts a KF-16 flanged fitting to a 0.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF16 2 = 0.77 in. (19.5mm) 3 = 0.78 in. (19.7 mm) 4 = 1.03 in. (26.1 mm) 5 = 1.28 in. (34.4 mm)

SWIFT-SEAL KF-25 to 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapter converts a KF-25 flanged fitting to a 0.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF25 2 = 0.52 in. (13.2 mm) 3 = 0.76 in. (19.2 mm) 4 = 1.00 in. (25.6 mm) 5 = 1.26 in. (31.9 mm)

SWIFT-SEAL KF-16 to 5/8 in. I.D. Compression Port, Quick Coupling Adapter, KF16, NW-16, 304 Stainless Steel This adapter converts a KF-16 flanged fitting to a 0.625 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-162 = 0.65 in. (16.4 mm)3 = 0.71 in. (17.9 mm)4 = 0.96 in. (24.3 mm)5 = 1.26 in. (30.1 mm)

SWIFT-SEAL KF-25 to 5/8 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapter converts a KF-25 flanged fitting to a 0.625 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF25 2 = 0.64 in. (13.2 mm) 3 = 0.79 in. (19.9 mm) 4 = 1.04 in. (26.3 mm) 5 = 1.29 in. (32.7 mm)

SWIFT-SEAL KF-25 to 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapters converts a KF-25 flanged fitting to a 0.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-25 2 = 0.77 in. (19.6 mm) 3 = 0.9 in. (22.8 mm) 4 = 1.15 in. (29.1 mm) 5 = 1.28 in. (32.5 mm)

SWIFT-SEAL KF-25 to 1.0 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapter converts a KF-25 flanged fitting to a 1.0 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely tapered inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, precise, and quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-25 2 = 1.02 in. (25.9mm) 3 = 0.81 in. (20.5mm) 4 = 1.06 in. (26.9 mm) 5 = 1.31 in. (33.2 mm)

SWIFT-SEAL KF-25 to 1 1/8 in. I.D. Compression Port, Quick Coupling Adapter, KF25, NW-25, 304 Stainless Steel This adapter converts a KF-25 flanged fitting to a 1.125 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-25 2 = 1.15 in. (29.1 mm) 3 = 1.04 in. (26.5 mm)

SWIFT-SEAL KF-40 to 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-16, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 0.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-402 = 0.52 in. (13.2 mm)3 = 0.85 in. (21.7 mm)4 = 1.10 in. (28.0 mm)5 = 1.35 in. (34.5 mm)

SWIFT-SEAL KF-40 to 5/8 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 0.625 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. "SWIFT-SEAL" KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-402 = 0.65 in. (16.4 mm)3 = 0.72 in. (18.3 mm)4 = 0.97 in. (24.7 mm)5 = 1.22 in. (31.0 mm)

SWIFT-SEAL KF-40 to 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 0.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 0.77 in. (19.6 mm) 3 = 0.86 in. (21.8 mm) 4 = 1.11 in. (28.1mm) 5 = 1.36 in. (34.5 mm)

SWIFT-SEAL KF-40 to 1.0 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.0 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.02 in. (25.9 mm) 3 = 0.85 in. (21.7 mm) 4 = 1.10 in. (28.1 mm) 5 = 1.35 in. (34.4 mm)

SWIFT-SEAL KF-40 to 1 1/8 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.125 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.15 in. (29.1 mm) 3 = 0.77 in. (19.7 mm) 4 = 1.02 in. (26.0 mm) 5 = 1.27 in. (32.3 mm)

SWIFT-SEAL KF-40 to 1 1/4 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.25 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.27 in. (32.3 mm) 3 = 0.76 in. (19.2 mm) 4 = 1.01 in. (25.5 mm) 5 = 1.26 in. (31.9 mm)

SWIFT-SEAL KF-40 to 1 3/8 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.375 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.39 in. (35.4 mm) 3 = 0.76 in. (19.3 mm) 4 = 1.01 in. (25.7 mm) 5 = 1.26 in. (32.0 mm)

SWIFT-SEAL KF-40 to 1 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF40, NW-40, 304 Stainless Steel This adapter converts a KF-40 flanged fitting to a 1.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-40 2 = 1.52 in. (13.2 mm) 3 = 0.76 in. (19.3 mm) 4 = 1.01 in. (25.7 mm) 5 = 1.26 in. (32.0 mm)

SWIFT-SEAL KF-50 to 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 0.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-16 2 = 0.52 in. (13.2 mm) 3 = 0.74 in. (18.9 mm) 4 = 0.99 in. (25.2 mm) 5 = 1.24 in. (31.6 mm)

SWIFT-SEAL KF-50 to 5/8 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 0.625 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 0.645 in. (16.4 mm) 3 = 0.72 in. (18.3 mm) 4 = 0.97 in. (24.7 mm) 5 = 1.22 in. (31.0 mm)

SWIFT-SEAL KF-50 to 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 0.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 0.77 in. (19.6 mm) 3 = 0.81 in. (20.5 mm) 4 = 1.06 in. (26.9 mm) 5 = 1.31 in. (33.2 mm)

SWIFT-SEAL KF-50 to 1.0 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.0 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.02 in. (13.2 mm) 3 = 0.69 in. (17.6 mm) 4 = 0.94 in. (24.0 mm) 5 = 1.94 in. (30.3 mm)

SWIFT-SEAL KF-50 to 1 1/8 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.125 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.15 in. (29.1 mm) 3 = 0.78 in. (19.9 mm) 4 = 1.03 in. (26.2 mm) 5 = 1.28 in. (32.2 mm)

SWIFT-SEAL KF-50 to 1 1/4 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.25 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.27 in. (32.3 mm) 3 = 0.78 in. (19.9 mm) 4 = 1.03 in. (26.2 mm) 5 = 1.28 in. (32.2 mm)

SWIFT-SEAL KF-50 to 1 3/8 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.375 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.39 in. (32.3 mm) 3 = 0.78 in. (19.9 mm) 4 = 1.03 in. (26.2 mm) 5 = 1.28 in. (32.2 mm)

SWIFT-SEAL KF-50 to 1 1/2 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.5 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.52 in. (38.6 mm) 3 = 0.83 in. (21.1 mm) 4 = 1.08 in. (27.5 mm) 5 = 1.33 in. (33.8 mm)

SWIFT-SEAL KF-50 to 1 3/4 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 1.75 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 1.77 in. (38.6 mm) 3 = 0.83 in. (21.1 mm) 4 = 1.08 in. (27.5 mm) 5 = 1.33 in. (33.8 mm)

SWIFT-SEAL KF-50 to 2.0 in. I.D. Compression Port, Quick Coupling Adapter, KF50, NW-50, 304 Stainless Steel This adapter converts a KF-50 flanged fitting to a 2.0 in. compression port. Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. SWIFT-SEAL KF adapters create a leak-proof seal when the knurled ring is tightened, allowing the uniquely shaped inner ring to both wedge and compress the O-ring circumferentially around the tube. An inner circlip can be re-located to any of the 3 indexed slots (or removed altogether), to make fast, repeatable tube insertions into the adapter; required for repeated, quick changeouts. All components can be easily dismantled for routine service. SWIFT-SEAL adapters are made of 304 Stainless Steel and anodized aluminum. Dimension Details: 1 = KF-50 2 = 2.02 in. (51.3 mm) 3 = 0.76 in. (19.3 mm) 4 = 1.00 in. (25.6 mm) 5 = 1.26 in. (31.9 mm)

Replacement Viton O-Ring for Swift-Seal 1/2in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50 These replacement O-rings are made to fit 0.50 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P103919), KF-25 (P103773), KF-40 (P103774), and KF-50 (P103778).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 1/2 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 5/8 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50 These replacement O-rings are made to fit 0.625 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P1010080), KF-25 (P103771), KF-40 (P1010081), and KF-50 (P1010082).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 5/8 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50 These replacement O-rings are made to fit 0.75 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P103920), KF-25 (P103770), and KF-50 (P103779).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50

Replacement Viton O-Ring for Swift-Seal 1.0 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50 These replacement O-rings are made to fit 1.0 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-25 (P103772), KF-40 (P103776), and KF-50 (P103780).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1.0 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 1/8 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50 These replacement O-rings are made to fit 1.125 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-25 (P103769), KF-40 (P103777), and KF-50 (P103781).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. KF-40 Viton® O-Ring Replacement 1 1/8 in. ID Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 1/4 in. Diameter Series Compression Port Adapters- KF-40, KF-50 These replacement O-rings are made to fit 1.25 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-40 (P103922), and KF-50 (P1010083).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 1/4 in. ID Diameter Series Compression Port Adapters- KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 3/8 in. Diameter Series Compression Port Adapters- KF-40, KF-50 These replacement O-rings are made to fit 1.375 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-40 (P104168), and KF-50 (P1010084).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 3/8 in. Diameter Series Compression Port Adapters- KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 1/2 in. Diameter Series Compression Port Adapters- KF-40, KF-50 These replacement O-rings are made to fit 1.500 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-40 (P103921), and KF-50 (P103782).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 1/2 in. Inner Diameter Series Compression Port Adapters- KF-40, KF-50

Replacement Viton O-Ring for Swift-Seal 1 3/4 in. Diameter Series Compression Port Adapters- KF-50 These replacement O-rings are made to fit 1.75 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-50 (P1010085).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 1 3/4 in. ID Diameter Series Compression Port Adapters- KF-50

Replacement Viton O-Ring for Swift-Seal 2.0 in. Diameter Series Compression Port Adapters- KF-50 These replacement O-rings are made to fit 2.0 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-50 (P103783).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines.Viton® is a registered trademark of DuPont Performance Elastomers. Viton® O-Ring Replacement 2.0 in. Inner Diameter Series Compression Port Adapters- KF-50

Replacement Retaining Ring for Swift-Seal 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50 These stainless steel replacement retaining rings are made to fit 0.75 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-16 (P103920), KF-25 (P103770), and KF-50 (P103779).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. These are Axially Assembled Internal retaining rings made act as a stop when properly installed within a Swift Seal fitting. Avoid scratching the bore interior by using correctly sized Ring Pliers. Stainless Steel Retaining Ring Replacement 3/4 in. Diameter Series Compression Port Adapters- KF-16, KF-25, KF-50

Replacement Retaining Ring for Swift-Seal 1 1/8 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50 These stainless steel replacement retaining rings are made to fit 1.125 in. (internal) diameter Swift-Seal Compression Port Adapters with flange sizes KF-25 (P103769), KF-40 (P103777), and KF-50 (P103781).Compression ports are typically used to make quick connections to tubes and half nipples, commonly found on gauges, instruments, and gas supply lines. These are Axially Assembled Internal retaining rings made act as a stop when properly installed within a Swift Seal fitting. Avoid scratching the bore interior by using correctly sized Ring Pliers. Stainless Steel Retaining Ring Replacement 1 1/8 in. Diameter Series Compression Port Adapters- KF-25, KF-40, KF-50