Ideal Vacuum Cube 6 x 6 Vacuum Chamber Blank Plate No Ports with Internal Optical Breadboard Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 6 inch blank plate without ports.The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. It has an internal optical breadboard for mounting test items or fixtures. This is the least expensive Cube plate with an internal optical breadboard. It is often used for the bottom of Cubes, or any other Cube side where ports are not needed, but the ability to fixture components inside the chamber is desired. Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Machinable Blank Plate No Ports Uncoated for Bakeout. This is an uncoated Ideal Vacuum Cube 6 x 6 inch blank plate without ports and without the internal optical breadboard grid found on most other Cube plates. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This is the least expensive Cube plate of any we offer. Use it as is for the bottom of a Cube or any other Cube side where ports are not needed, or customize to your requirements by adding unusual or proprietary ports, for welding on bulkhead fittings, or for custom attachments and fixtures. Note that Ideal Vacuum offers custom Cube plate solutions. Please speak to your representative for a quick quote. Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Machinable Blank Plate No Ports Uncoated Stainless Steel for Bakeout. This is an uncoated Ideal Vacuum Cube 6 x 6 inch blank plate without ports and without the internal optical breadboard grid found on most other Cube plates. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. Use this plate as is for the bottom of a Cube or any other Cube side where ports are not needed, or customize to your requirements by adding unusual or proprietary ports, for welding on bulkhead fittings, or for custom attachments and fixtures. Note that Ideal Vacuum offers custom Cube plate solutions. Please speak to your representative for a quick quote. Features: 6 x 6 plate 304L stainless steel Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With Four KF-16 (NW-16) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 6 inch plate with four KF-16 bulkhead ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-16 centering ring (P101242) and bulkhead clamp (P104598 or P108101). Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Quad KF-16 (NW-16) bulkhead ports (uses KF-16 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One KF-16 (NW-16) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 6 inch plate with one KF-16 centered bulkhead port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-16 centering ring (P101242) and bulkhead clamp (P104598 or P108101). Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Single KF-16 (NW-16) bulkhead port (uses KF-16 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One KF-25 (NW-25) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 6 inch plate with one KF-25 centered bulkhead port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599). Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Single KF-25 (NW-25) bulkhead port (uses KF-25 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One KF-40 (NW-40) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 6 inch plate with one KF-40 centered bulkhead port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600). Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Single KF-40 (NW-40) bulkhead port (uses KF-40 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One KF-50 (NW-50) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 6 inch plate with one KF-50 centered bulkhead port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-5 centering ring (P101245) and bulkhead clamp (P108104 or P104601). Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Single KF-50 (NW-50) bulkhead port (uses KF-50 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One ISO-F 63 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 6 x 6 inch plate with one ISO-F 63 centered port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101766). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 6" x 6" plate 6061-T6 aluminum Uncoated for bakeout to 150°C One centered ISO-F 63 port with 5/16-18 tapped mounting holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One Conflat CF 1.33 in. Port. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 1.33" centered Conflat port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has #8-32 UNC tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 8-32 x 1/2" long, silver-plated, 12 point bolts (P104402). The CF port is not compatible with metal gaskets. Use only Viton seals (P104339). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Single CF 1.33" port with #8-32 UNC tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x6 Vacuum Chamber Plate With One Conflat CF 2.75 in. Port Uncoated for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 2.75" centered Conflat port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF port is not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Single CF 2.75" port with 1/4-28 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One Conflat CF 3.375 in. Port Uncoated for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 3.375" centered Conflat port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104342). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Single CF 3.375" port with 5/16-24 UNF tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.

Ideal Vacuum Cube 6 x 6 Vacuum Chamber Plate With One Conflat CF 4.5 in. Port Uncoated for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 6 x 6 inch plate with one CF 4.5" centered Conflat port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104343). Cube baseline vacuum is 1 x 10-7 Torr. Features: 6 x 6 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Single CF 4.5" port with 5/16-24 UNF tapped holes No internal optical breadboard Mounts in any orientation Directly mounts to frame size: 6x6x6 6x6x12 6x6x6 hexagon 6x6x12 hexagon 6x6x12 octagon This plate can also be mounted on any 9x9 or 12x12 plate with a plate adapter kit.