Keyword Part Number:
MKS HPS® 423 I-Mag® Sensor Cold Cathode Vacuum Gauge KF25, NW25, compatible with MKS 943 Cold Cathode vacuum controller. MKS Part Number: 104230004 Using an inverted magnetron design, the 423 I-Mag® sensor can operate at pressures much lower than a traditional Penning cold cathode sensor, as low as 10-11 Torr with the proper controller. This increased pressure range makes the HPS® Cold Cathode sensor ideal for UHV use. A unique design feature of the HPS® Cold Cathode sensor is a second feedthrough for ion collection. In an ordinary single feedthrough design, any current leakage between the anode and ground would result in pressure measurement errors. Only the ion current from the cathode contributes to a measurement reading in a dual feedthrough design, making it ideal for process monitoring. With no filament to burn out, the 423 I-Mag® sensor is not ruined by sudden inrushes of air and is resistant to vibration damage. Additionally, there is no need to adjust the emission current or to degas the gauge, reducing response time to pressure changes. If bakeout is required, the magnets and sensor connectors can be removed and the sensor can be baked to 400°C. This is a Cold Cathode Sensor ONLY, the MKS signal cable and MKS 943 Controller for this unit are sold separetely on this website. A complete specification brochure and operations manual are available for download in PDF format below.
Condition: New
Part Number: P103331
Price: CAN$986.13
MKS HPS 423 I-Mag Sensor Cold Cathode Vacuum Gauge Conflat 2.75 Inlet. MKS Part Number: 104230002. (Compatible with MKS 943 Cold Cathode Vacuum Controller) Using an inverted magnetron design, the 423 I-Mag Sensor can operate at pressures much lower than a traditional Penning cold cathode sensor, as low as 10-11 Torr with the proper controller. This increased pressure range makes the HPS Cold Cathode sensor ideal for UHV use. A unique design feature of the HPS Cold Cathode sensor is a second feedthrough for ion collection. In an ordinary single feedthrough design, any current leakage between the anode and ground would result in pressure measurement errors. Only the ion current from the cathode contributes to a measurement reading in a dual feedthrough design, making it ideal for process monitoring. With no filament to burn out, the 423 I-Mag sensor is not ruined by sudden inrushes of air and is resistant to vibration damage. Additionally, there is no need to adjust the emission current or to degas the gauge, reducing response time to pressure changes. If bakeout is required, the magnets and sensor connectors can be removed and the sensor can be baked to 400°C. This is a Brand New Cold Cathode Sensor ONLY the MKS signal cable and MKS 943 Controller for this unit are sold separetely on this website. A complete specification brochure and operations manual are available for download in PDF format below.
Condition: New
Part Number: P107571
Price: CAN$1,146.90
MKS HPS® Series 943 Cold Cathode Vacuum Gauge Controller, Compatible with 423 I-Mag® Cold Cathode sensor or 421 sensor for UHV use. MKS Part Number: 943-120V60-TR-PC. The MKS HPS® Series 943 Cold Cathode vacuum gauge controller is compatible with the Series 423 I-Mag® sensor for OEM or industrial use and the 421 sensor for UHV use. The Series 943 Cold Cathode vacuum gauge controller is designed to be user-friendly and to provide fast, reliable pressure measurement from 10-10 to 10-2 Torr. The 943 Cold Cathode Vacuum Gauge is well-suited for industrial, process and analytical applications including pressure measurement of high vacuum chambers and control of high vacuum systems. Areas of applications may include high energy physics, analytical instruments, laser production, ion implantation, mass spectrometry, or PVD. The 943 digital controller features two standard independent relay set points, which allows you to confidently control your process. Adjust the set points from the front panel while viewing the display. Red LEDs indicate set point activation status. The Series 943 displays pressure from 10-10 to 10-2 Torr using a high visibility LED display. Two types of analog output are standard, for remote monitoring of pressure. An internal converter provides output that allows a simple log conversion from voltage to pressure over the entire operating range. A fast responding, buffered analog output is also provided through the 15 pin accessory connector on the rear panel. Front panel functions allow the user to disable the high voltage, as well as set a pressure at which the cold cathode will automatically turn off. This prevents the controller from displaying incorrect readings when the pressure goes above the operating range of the sensor. This unit is brand new and comes with power cord, an accessory connector kit, and an instruction manual. The 421 Sensor and 423 I-Mag® Sensor for this unit and signal cable are sold separetely on this website. A complete specification brochure and operations manual are available for download in PDF format below.
Condition: New
Part Number: P103330
Price: CAN$2,639.95
MKS Cold Cathode Vacuum Gauge Signal Cable Connects 943 Controller to HPS 423 I-Mag® Sensor, 10 feet (3m). MKS Part Number: 100007873 This is a MKS 10 foot long Cold Cathode vacuum gauge signal cable connects to the top of the MKS 423 I-Mag® Cold Cathode sensor and the to the back port of the MKS 943 Cold Cathode controller. This is the cable ONLY, all other parts and accessories are optional. The 423 I-Mag® Sensor, uses an inverted magnetron design and can operate at pressures much lower than a traditional Penning cold cathode sensor, as low as 10-11 Torr with the proper controller. This increased pressure range makes the HPS® Cold Cathode sensor ideal for UHV use. A unique design feature of the HPS® Cold Cathode sensor is a second feedthrough for ion collection. In an ordinary single feedthrough design, any current leakage between the anode and ground would result in pressure measurement errors. Only the ion current from the cathode contributes to a measurement reading in a dual feedthrough design, making it ideal for process monitoring. With no filament to burn out, the 423 I-Mag® sensor is not ruined by sudden inrushes of air and is resistant to vibration damage. Additionally, there is no need to adjust the emission current or to degas the gauge, reducing response time to pressure changes. If bakeout is required, the magnets and sensor connectors can be removed and the sensor can be baked to 400°C.
Condition: New
Part Number: P103332
Price: CAN$801.08
MKS Cold Cathode Vacuum Gauge Signal Cable Connects 943 Controller to HPS 423 I-Mag® Sensor, 50 feet (15 Meters). MKS Part Number: 100002395. This is a MKS 50 Foot long Cold Cathode Vacuum Gauge Signal Cable Connects to the top of the MKS 423 I-Mag® Cold Cathode Sensor and the to the back port of the MKS 943 Cold Cathode Controller. This is the cable ONLY, all other parts and accessories are optional. The 423 I-Mag® Sensor, uses an inverted magnetron design and can operate at pressures much lower than a traditional Penning cold cathode sensor, as low as 10-11 Torr with the proper controller. This increased pressure range makes the HPS® Cold Cathode sensor ideal for UHV use. A unique design feature of the HPS® Cold Cathode sensor is a second feedthrough for ion collection. In an ordinary single feedthrough design, any current leakage between the anode and ground would result in pressure measurement errors. Only the ion current from the cathode contributes to a measurement reading in a dual feedthrough design, making it ideal for process monitoring. With no filament to burn out, the 423 I-Mag® sensor is not ruined by sudden inrushes of air and is resistant to vibration damage. Additionally, there is no need to adjust the emission current or to degas the gauge, reducing response time to pressure changes. If bakeout is required, the magnets and sensor connectors can be removed and the sensor can be baked to 400°C.
Condition: New
Part Number: P103370
Price: CAN$1,600.00
MKS Vacuum Gauge Cable Connects 946 Controller to 423 I-Mag® Cold Cathode Sensor, 10 ft. (3m) Long. MKS Part Number: 100016295. The MKS Manometer cable connects 946 controllers to 423 I-Mag® Cold Cathode sensor. This is the cable ONLY. The series 937B digital combination vacuum gauge controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012854
Price: CAN$1,145.16
MKS Vacuum Gauge Cable Connects 946 Controller to 423 I-Mag Cold Cathode Sensor, 25 ft. (7.5m) Long. MKS Part Number: 100016296. The MKS Manometer cable connects 946 controllers to 423 I-Mag Cold Cathode Sensor. This is the Cable ONLY. The Series 937B Digital Combination Vacuum Gauge Controller operates up to six vacuum pressure sensors simultaneously. This highly flexible vacuum gauge controller supports a wide range of sensor technologies, including cold cathode, hot cathode, standard Pirani, convection Pirani, Baratron® capacitance manometers and absolute Piezo sensors for a measurement range from ultra-high vacuum to above atmospheric pressure. The back lit LCD display, intuitive menus and simple push button front panel, allows for ease in setup of the 937B. The 937B, enables the use of any sensor card in each of the sensor card slots. The 937B can be configured with up to three hot or cold cathode type gauges, or three dual sensor cards for a maximum of six gauge connections.
Condition: New
Part Number: P1012855
Price: CAN$2,228.48