Replacement Cartridge for Alcatel AdixenDust Filter DFT-25 (DFT25) PN: 068445 This is a Replacement Cartridge for Alcatel Adixen inlet dust filter DFT-25 (DFT 25 Part Number 104202 for sale on this website) which prevents the entry of dust particles in the pump. The Benefits of the Inlet Dust Filter promotes centrifugal separation of dust particles. Replacement Cartridge Filter Part Number 068445 Fits Alcatel Inlet Dust Filter DFT 25 (DFT-25) Part Number 104202. Common Dimensions & Specifications: Approx. weight 12 oz., Height= 2.5 inches, Diameter= 1.25 inches.

Inlet Screen for Alcatel Rotary Vane Vacuum Pumps, Models: 1005, 1010, 1015, 1021, 2005, 2010, 2015, 2021 PN: 65787 This is a Replacement Inlet Screen for Alcatel Rotary Vane Vacuum Pumps, Models: 1005, 1010, 1015, 1021, 2005, 2010, 2015, 2021. This filter which prevents the entry of dust particles into the pump.

Alcatel Adixen Inlet Dust Filter DFT-25 for Rotary Vane Vacuum Pumps KF25 Inlet Flange Pumps (Alcatel Part Number 104202) This Alcatel Adixen Inlet Dust Filter DFT-25 prevents the entry of dust particles in the pump. The Benefits of the Inlet Dust Filter promotes centrifugal separation of dust particles. An internal over pressure valve prevents exceeding the maximum permissible exhaust pressure. Supplied with filter element, one KF25 centering ring, one clamp, and one additional angle port. This DFT-25 (DFT 25) Alcatel Adixen Dust Filter uses replacement cartridge (Part Number: 068445) located on this website. Fits Alcatel Adixen Rotary Vane Pumps: Alcatel Adixen 2005, 2010I, 2015I, 202I, 2004A, 2008A, 2012A, 2020A, 2005SD, 2010SD, 2015SD, 2021SD, 1005SD, 1010SD, 1015SD, 1021SD and other KF25 inlet pumps. Common Dimensions & Specifications: Body material: Polyamide Cartridge material: Epoxy glass/micro fiber Approx. weight 12 oz., Height= 5.75 inches. Alcatel Part Number 104202

Alcatel Adixen LNT-25 P1 Liquid Nitrogen Inlet Vacuum Pump Trap, 0.5 Liter LN2 Capacity (Alcatel Part Number 786346) The Alcate Adixen LNT-25 P1 trap condense at the pump inlet all gases whose critical condensation temperature is above -196C (77K). They can be used either to protect the pump against condensable vapor introduction or to prevent backstreaming of oil vapors at the pump inlet when an absolutely clean vacuum is desired. Fits Rotary Vane Pumps: Alcatel Adixen 2005, 2010I, 2015I, 2020I, 2004A, 2008A, 2012A, 2020A, 2005SD, 2010SD, 2015SD, 2021SD, 1005SD, 1010SD, 1015SD, 1021SD and other KF25 outlet pumps. Common Dimensions & Specifications: Body: Glass Flanges: Aluminum Weight: 2.2 lbs Dimensions: Height 292 x 130 mm. Exhaust & Inlet: KF-25 ISO NW-25 Liquid Nitrogen (LN2) Capacity: 0.5 Liters Fill Interval: 5 Hrs Alcatel Part Number: 786346

Alcatel Adixen ST-25-C (ST25C) Sorption Trap for Rotary Vane Vacuum Pumps KF25 Outlet Flange Pumps, with electrical element. (Alcatel Part Number 066845) Sorption traps consist of a sealed body filled with adsorbent media whose extremely porous surfaces adsorb water or hydrocarbon molecules contained in the pumped gases. Sorption traps provide simple and effective protection against oil backstreaming whenever clean vacuum is desired. The saturated adsorbent elements can be regenerated by heating (baked out in oven, or using integrated heater, according to models). Fits Rotary Vane Pumps: Alcatel Adixen 2005, 2010I, 2015I, 2020I, 2004A, 2008A, 2012A, 2020A, 2005SD, 2010SD, 2015SD, 2021SD, 1005SD, 1010SD, 1015SD, 1021SD and other KF25 outlet pumps. Common Dimensions & Specifications: Housing: Stainless Steel Weight: 3.08 lbs Dimensions: Height 164 x 114 mm. Exhaust & Inlet: KF-25 ISO NW-25 Absorbent Charge, Option 1: Activated Alumina Part Number 068779 Absorbent Charge, Option 2: Zeolite Part Number 068182 Heater Element, 115 VAC: Part Number 066876 Heater Element, 220 VAC: Part Number 068319