Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-cz
Adixen 2021C2 Pumps On Sale Edwards nEXT300D TStations On Sale Ideal Vacuum XG-120 Digital Thermocouple Gauges On Sale Agilent IDP-10 Dry Scroll Vacuum Pumps On Sale Agilent IDP-15 Dry Scroll Vacuum Pumps On Sale Pfeiffer ASM340 Leak Detectors On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC Vacuum Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Edwards XDS Power Cable for XDS35i XDS-35i Dry Scroll Vacuum Pumps PN A50507003
In Stock
18


Edwards AC Power Cable for XDS35i XDS-35i Dry Scroll Vacuum Pumps PN A50507003 This is an AC power cable for the XDS-35i dry scroll pump 1-phase 100-230 VAC USA or Japan, 2 meters long. Edwards Part Number is A50507003

Condition: New



Part Number: P102992



Price: Kč1,973.45



Currency: Czech Koruna (CZK)

Edwards Europe AC Power Cable for XDS5, XDS10 and nXDS Dry Scroll Vacuum Pumps. PN A50506000
In Stock
3


Edwards AC Power Cable for XDS5, XDS10 and nXDS Dry Scroll Vacuum Pumps. 10 A, C13. For use in Europe only. PN A50506000 This is a power cable for Edwards XDS5, XDS10 and nXDS Dry Scroll Vacuum Pumps. Lead assembly, 10A, C13. For use in Europe only. PN A50506000. Edwards Part No. A50A506000.

Condition: New



Part Number: P105428



Price: Kč774.47



Currency: Czech Koruna (CZK)

Edwards UK AC Power Cable for XDS5, XDS10 and nXDS Dry Scroll Vacuum Pumps. PN A50505000
In Stock
1


Edwards UK AC Power Cable for XDS5, XDS10 and nXDS Dry Scroll Vacuum Pumps. 10 A, C13. For use in the UK only PN A50505000 This is a power cable for Edwards XDS5, XDS10 and nXDS Dry Scroll Vacuum Pumps. 10 A, C13. For use in the UK only. PN A50505000. Edwards Part No. A50A505000.

Condition: New



Part Number: P105427



Price: Kč1,753.65



Currency: Czech Koruna (CZK)

Input Power Cord Mains Cable 2m Long 115 VAC for all Edwards nXDS and nXDSi Dry Scroll Pumps.
In Stock
121


Input Power Cord Mains Cable 2m Long 115 VAC for all Edwards nXDS and nXDSi Dry Scroll Pumps. This is an input power cord (mains cable), 115 VAC, 2 meters long, with US plug 5-15P to C13 Connector. It is used on all Edwards nXDS and nXDSi dry scroll pumps. Replaces Edwards part number B8J200813, A50507000 or D40013120, and is the same as our part number P106129). This power cord is used on: Edwards nXDS6i Edwards nXDS10i Edwards nXDS15i Edwards nXDS20i Edwards nXDS6ic Edwards nXDS10ic Edwards nXDS15ic Edwards nXDS20ic Edwards nXDS6ir Edwards nXDS10ir Edwards nXDS15ir Edwards nXDS20ir

Condition: New



Part Number: P102990



Price: Kč1,336.33




Currency: Czech Koruna (CZK)

Edwards nXDS Dry Scroll Pump Gas Ballast Purge Adapter, Fits nXDS-i and nXDS-ic Dry Scroll Vacuum Pumps. PN: A735-01-809
In Stock
1
Expecting 2
Anticipated Arrival 2 on 2024-12-20


Edwards nXDS Dry Scroll Pump Gas Ballast Purge Adapter, Fits nXDS-i and nXDS-ic Dry Scroll Vacuum Pumps. Edwards Vacuum Part Number PN: A735-01-809. These Edwards nXDS gas ballast purge adapters may be fitted in place of the original gas ballast control knob and used to supply an inert purge gas, such as nitrogen. They are commonly used with the nXDS-i standard and nXDS-ic chemical resistant series dry scroll vacuum pumps. It is important to replace the gas ballast control knob with this purge gas adapter when you are using the nXDS pump on chemical applications, please read below. The gas ballast is a control valve, that intentionally introduces a small room-air leak into the second stage of the vacuum pump, producing a positive flow throughput, and sweeping out vapors from volatile compounds, such as, water and others. When pumping volatile compounds, like water vapor, they are compressed inside the pump and condense into a liquid. When condensation happens the ultimate vacuum pressure of the pump is now limited to the vapor pressure of the volatile contaminating compound, for example, the room temperature vapor pressure of water is around 23.8 Torr. The gas ballast should be opened while the pump is warmed up to help evaporate and sweep out the volatile vapors. It is often good to leave the pump running overnight with the gas ballast open to rid it of volatile compounds. The gas ballast should not be used when pumping flammable compounds, as the gas ballast introduces air which contains oxygen. The gas ballast should also not be used when pumping toxic compounds, as the gas ballast introduces a leak into the room air, if the pump is turned off, a small amount of vapors from inside the pump could potentially leak out through the gas ballast port into the room air. These Edwards nXDS gas ballast purge adapters have part number A735-01-809. Works With Edwards nXDs Series Dry Scroll Vacuum Pumps: Edwards nXDS6i Edwards nXDS10i Edwards nXDS15i Edwards nXDS20i Edwards nXDS6ic Edwards nXDS10ic Edwards nXDS15ic Edwards nXDS20ic

Condition: New



Part Number: P105482



Price: Kč11,747.46




Currency: Czech Koruna (CZK)

Leybold Varian Edwards Shaft Seal Viton 25x37x4.75mm for DS600, GVSP30, SC30D, ESDP30A, DIS500, DIS550I Scroll Pumps
In Stock
5


Leybold Varian Edwards Shaft Seal Viton Seal, 25x37x4.75mm. (1 each) Leybold Varian Edwards Shaft Seal Viton 25x37x4.75mm for DS600, GVSP30, SC30D, ESDP30A, DIS500, DIS550I Scroll Pumps.

Condition: New



Part Number: P1011840



Price: Kč1,327.70



Currency: Czech Koruna (CZK)

Leybold Varian Edwards Shaft Seal Viton 20x32x8mm for DS600, GVSP30, SC30D, ESDP30A, DIS500, DIS550I Scroll Pumps
In Stock
5


Leybold Varian Edwards Shaft Seal Viton Seal, 20x32x8mm. (1 each) Leybold Varian Edwards Shaft Seal Viton 20x32x8mm for DS600, GVSP30, SC30D, ESDP30A, DIS500, DIS550I Scroll Pumps.

Condition: New



Part Number: P1011842



Price: Kč2,692.55



Currency: Czech Koruna (CZK)

Edwards nXDS Ballast Blank-Off Adaptor Kit, Converts Standard nXDS-i Pumps into The nXDS-ir Version, PN: A735-01-806
In Stock
1


Edwards nXDS Ballast Blank-Off Adapter Kit, Converts Standard nXDS-i Pumps into The nXDS-ir Version. Edwards Vacuum Part Number PN: A735-01-806. These Edwards nXDS gas ballast blank adapters are for the nXDS dry scroll vacuum pumps. This adapter kit allows you to convert a standard nXDS-i pump into an nXDS-ir version. The nXDS-ir series pumps are designed for special applications, such as gas recirculation, rare gas pumping and recovery, or other applications where the dilution of the pumped gas is undesirable, or where sealing is integral to minimizing potential gas loss. These Edwards nXDS gas ballast blank adapters are often used to replace the standard gas ballast control knob, so that the gas ballast cannot be accidentally opened, the advantage is improved leak tightness at the ballast location. They have Edwards part number A735-01-806.Works With Edwards nXDs Series Dry Scroll Vacuum Pumps: Edwards nXDS6i Edwards nXDS10i Edwards nXDS15i Edwards nXDS20i Edwards nXDS6ic Edwards nXDS10ic Edwards nXDS15ic Edwards nXDS20ic

Condition: New



Part Number: P105483



Price: Kč6,221.17




Currency: Czech Koruna (CZK)

Edwards nXDS Replacement Cooling Fan, Fits All nXDS Series Dry Scroll Vacuum Pumps, 24 VDC, PN: A735-01-707
In Stock
10


Edwards nXDS Replacement Cooling Fan, Fits All nXDS Series Dry Scroll Vacuum Pumps, 24 VDC, PN: A735-01-707. Edwards Vacuum Part Number PN: A735-01-707. These Edwards nXDS replacement air cooling fans are used to replace the existing fan inside the pump''s fan cover. These nXDS replacement cooling fans fit all nXDS serier dry scroll vacuum pumps, operate on 24 VDC, and have part number A735-01-707. Works With All Edwards nXDS Series Vacuum Pumps: Edwards nXDS6i Edwards nXDS10i Edwards nXDS15i Edwards nXDS20i Edwards nXDS6ic Edwards nXDS10ic Edwards nXDS15ic Edwards nXDS20ic Edwards nXDS6ir Edwards nXDS10ir Edwards nXDS15ir Edwards nXDS20ir

Condition: New



Part Number: P105486



Price: Kč12,262.57




Currency: Czech Koruna (CZK)

Edwards nXDS Dry Scroll Vacuum Pump Tip Seal Kit, For Minor Rebuild Service, Fits All nXDS Series Pumps, PN: A735-01-801
In Stock
18
Expecting 12
Anticipated Arrival 12 on 2025-01-28


Edwards nXDS Dry Scroll Vacuum Pump Tip Seal Kit, For Minor Rebuild Service, Fits All nXDS Series Pumps. Edwards Vacuum Part Number PN: A735-01-801. These Edwards nXDS series dry scroll pump tip seal kits are used when a minor rebuild service is required. This is typically needed 2-years after the pump is placed into service, often required between 12,000 and 16,000 operating hours. The pump will start to lose its ability to reach the lowest ultimate pressure as the tip seals become worn out. The base pressure for a new nXDS pump is often measured at 10 mTorr or less when evacating a good clean leak-tight vacuum chamber. If you notice that your base presure is now only getting to 25 mTorr then the tip seal will likely need to be replaced. Please see the instructions shown in the tip seal replacement manual in our Downloads section below.Works With All Edwards nXDs Series Dry Scroll Vacuum PumpsEdwards nXDS6i Edwards nXDS10i Edwards nXDS15i Edwards nXDS20i Edwards nXDS6ic Edwards nXDS10ic Edwards nXDS15ic Edwards nXDS20ic Edwards nXDS6ir Edwards nXDS10ir Edwards nXDS15ir Edwards nXDS20ir

Condition: New



Part Number: P105546



Price: Kč22,824.23




Currency: Czech Koruna (CZK)

Edwards ESDP12 Dry Scroll Vacuum Pump Shaft A710-02-012
In Stock
4


Edwards ESDP12 Dry Scroll Vacuum Pump Shaft (Part Number A710-02-012 ) Edwards ESDP12 dry scroll vacuum pump replacement shaft, part number A710-02-012 . We also do minor and major repair work on all brand vacuum scroll pumps, call us for a quote at (505) 872-0037.

Condition: New



Part Number: P102817



Price: Kč18,218.40



Currency: Czech Koruna (CZK)

Edwards ESDP30, ESDP30A, Scroll Vacuum Pump Tip Seal Replacement Kit PN 71004026
In Stock
8


Edwards ESDP30, ESDP30A, Scroll Vacuum Pump Tip Seal Replacement Kit (PN 71004026) This is a tip seal kit for an Edwards ESDP30, ESDP30A, Dry Scroll Pump. The tip seal kits are guaranteed to meet or exceed OEM specifications and includes tip seals. We also do minor and major repair work on all brand vacuum scroll pumps, call us for a quote at (505) 872-0037.

Condition: New



Part Number: P102811



Price: Kč19,132.37



Currency: Czech Koruna (CZK)

Edwards nXDS Series Dry Scroll Vacuum Pump Micron Filter Trap, Can Be Used On The Inlet or Pump Exhaust, KF-25 Vacuum Flanges, PN: A505-97-805
In Stock
1
Expecting 1
Anticipated Arrival 1 on 2025-01-28


Edwards nXDS Series Dry Scroll Vacuum Pump Micron Filter Trap, Can Be Used On The Inlet or Pump Exhaust, KF-25 Vacuum Flanges. Edwards Vacuum Part Number PN: A505-97-805. These Edwards nXDS micron filter traps can either be used on the pump''s inlet to protect from debris that might be sucked in from the vacuum chamber or they can be used between the vacuum pump and the exhaust line to trap out tip-seal dust. These Edwards nXDS filter traps are supplied ready with a 5 micron element, have KF-25 vacuum flanges, and Edwards part number A505-97-805. Replacement Filter Media 1 micron, A505-97-803. P108771 Replacement Filter Media 5 micron, A505-97-802. P108772 Works With All Edwards nXDs Series Dry Scroll Vacuum Pumps: Edwards nXDS6i Edwards nXDS10i Edwards nXDS15i Edwards nXDS20i Edwards nXDS6ic Edwards nXDS10ic Edwards nXDS15ic Edwards nXDS20ic Edwards nXDS6ir Edwards nXDS10ir Edwards nXDS15ir Edwards nXDS20ir

Condition: New



Part Number: P105484



Price: Kč39,579.98




Currency: Czech Koruna (CZK)

Edwards XDS35i Dry Scroll Vacuum Pump Filter, for Inlet or Exhaust, KF-40. PN: NRD383000
In Stock
1


Edwards XDS35i Dry Scroll Vacuum Pump Filter, for Inlet or Exhaust, KF-40. PN: NRD383000 Edwards Inlet or Exhaust Filter KF40 NW40 for XDS35i dry scroll pumps. The inlet dust filter has two functions. It can be connected inline between the pump inlet and your chamber outlet connection to prevent dust from migrating into your system. Alternatively, it can be connected inline between the pump exhaust and your exhaust extraction system. The filter is supplied ready to use with a 5 micron element. Note: If connecting the exhaust filter onto the pump outlet, a NW40 hose nozzle, C10516628 is available to connect onto the outlet of the dust filter. Edwards Part Number is NRD383000 Link to Edwards Replacement Filter Media 1 micron. P108771 Link to Edwards Replacement Filter Media 5 micron. P108772

Condition: New



Part Number: P108584



Price: Kč45,403.25



Currency: Czech Koruna (CZK)

NEW Edwards XDS10, XDS10c, XDS5, XDS5c Scroll Vacuum Pump REAR Bearing - 1 each
In Stock
6
Expecting 7
Anticipated Arrival 7 on 2024-11-15


NEW Edwards XDS10, XDS10c, XDS5, XDS5c Scroll Vacuum Pump Rear Bearing - 1 each This rear bearing fits Edwards XDS, XDS10C, XDS5, and XDS5c dry scroll vacuum pump and is not included in our bearing replacement kit P102621. This bearing is needed if a complete bearing replacement is required.

Condition: New



Part Number: P103284



Price: Kč12,287.26



Currency: Czech Koruna (CZK)

Edwards nXDS Vacuum Gas Ballast Control Knob, Fits nXDS-i and nXDS-ic Dry Scroll Vacuum Pumps, PN: A735-01-759
Out of Stock


Edwards nXDS Vacuum Gas Ballast Control Knob, Fits All nXDS Dry Scroll Vacuum Pumps.Edwards Vacuum Part Number PN: A735-01-759. These Edwards nXDS gas ballast control knobs are used with the nXDS-i standard and nXDS-ic chemical resistant series dry scroll vacuum pumps. The gas ballast is a control valve that intentional introduces a small room-air leak into the second stage of the vacuum pump, producing a positive flow throughput, and sweeping out vapors from volitale compounds, such as, water and others. When pumping volitale compounds, like water vapor, they are compressed inside the pump and condense into a liquid. When condensation happens the ultimate vacuum pressure of the vacuum pump is now limited to the vapor pressure of the volitale contamenting compoud, for example, the room temperature vapor pressure of water is around 23.8 Torr. The gas ballast should be opened while the pump is warmed up to help evaporate and sweep out the volitale vapors. It is often good to leave the pump running overnight with the gas ballast open to rid it of volitale compounds. The gas ballast should not be used when pumping flamable, as the gas ballast introduces air which contains oxygen. The gas ballast should also not be used when pumping toxic compounds, as the gas ballast introduces a leak into the room air, if the pump is turned off, a small amounts of vapors from inside the pump could potentially leak out through the gas ballast port into the room air. These replacement Edwards nXDS gas ballast control knobs have part number A735-01-759. Works With Edwards nXDs Series Dry Scroll Vacuum Pumps: Edwards nXDS6i Edwards nXDS10i Edwards nXDS15i Edwards nXDS20i Edwards nXDS6ic Non-Flamable and Non-Toxic Gases Edwards nXDS10ic Non-Flamable and Non-Toxic Gases Edwards nXDS15ic Non-Flamable and Non-Toxic Gases Edwards nXDS20ic Non-Flamable and Non-Toxic Gases

Condition: New



Part Number: P1010097



Price: Kč1,824.36




Currency: Czech Koruna (CZK)

Edwards nXDS Exhuast And Gas Ballast Kit, For Minor Rebuild Service, Fits All nXDS Series Pumps, PN: A735-01-803
In Stock
4


Edwards nXDS Exhuast And Gas Ballast Kit, For Minor Rebuild Service, Fits All nXDS Series Pumps. Edwards Vacuum Part Number PN: A735-01-803. These Edwards nXDS series dry scroll pump exhaust valve and gas ballast kits are often used when a minor rebuild service is required. This is typically needed 2-years after the pump is placed into service, often required between 12,000 and 16,000 operating hours. They are often installed at the same time when the tip seals are being replaced, see Edwards tip seal kit part number A735-01-801. The pump will start to lose its ability to reach the lowest ultimate pressure as the tip seals become worn out. The base pressure for a new nXDS pump is often measured at 10 mTorr or less when evacuating a good clean leak-tight vacuum chamber. If you notice that your base pressure is now only getting to 25 mTorr then the tip seal will likely need to be replaced. Please see the instructions shown in the tip seal replacement manual in our Downloads section below.Works With All Edwards nXDs Series Dry Scroll Vacuum PumpsEdwards nXDS6i Edwards nXDS10i Edwards nXDS15i Edwards nXDS20i Edwards nXDS6ic Edwards nXDS10ic Edwards nXDS15ic Edwards nXDS20ic Edwards nXDS6ir Edwards nXDS10ir Edwards nXDS15ir Edwards nXDS20ir

Condition: New



Part Number: P1011279



Price: Kč3,688.50




Currency: Czech Koruna (CZK)
Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com
© 2003 - 2024 Ideal Vacuum Products LLC. All rights reserved.