MKS PR4000B Half-Rack Vacuum Gauge Controller Power Supply and Readout, NO Cards, RS232, 2 Channels. MKS Part Number: PR4000BF2V2. The MKS PR4000B is a half-rack Digital Power Supply and Display module. It is available with either one or two channels, and has a 4.5 place backlit LCD display as standard. Both versions support internal or external set points and master/slave control schemes. The single-channel version can control one Baratron® pressure transducer or one Mass-Flo® meter or controller. The dual-channel version supports up to two pressure transducers or two mass flow controllers, or one of each. Engineering units are user-selectable as Torr, mTorr, kTorr, Pa, kPa, cmH2O, psi, N/qm, ìbar, mbar and bar for pressure transducers; sccm, scm, slm, scfm, scfh for flow meters or controllers and V, % and °C. Other Features: Digital RS232 interface standard; RS485 interface optional on two-channel models User-selectable engineering units for both pressure transducers and flow devices Menu-driven with simple set-up and operation Power Supplies/Readouts are designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The PR4000B Vacuum System Controller is a two channel/sequentially selectable single readout. Compatible with mass flow controllers and mass flow readouts. Signal cables and optional cards for the MKS PR4000B are available on this website.

MKS Mass Flow Controller Cable Connects PR400 Controller to DB15 Mass Flow Meters, 10 ft. (3m) Long. MKS Part Number: RCB147-1-10. The MKS Mass Flow Controller Cable connectsa PR4000 controller to MKS mass flow meters and controllers with 15-pin D-sub connectors. This is the Cable ONLY. The MKS PR4000B is a half-rack Digital Power Supply and Display module. It is available with either one or two channels, and has a 4.5 place backlit LCD display as standard. Both versions support internal or external set points and master/slave control schemes. The single-channel version can control one Baratron® pressure transducer or one Mass-Flo® meter or controller. The dual-channel version supports up to two pressure transducers or two mass flow controllers, or one of each. Engineering units are user-selectable as Torr, mTorr, kTorr, Pa, kPa, cmH2O, psi, N/qm, ìbar, mbar and bar for pressure transducers; sccm, scm, slm, scfm, scfh for flow meters or controllers and V, % and °C. Other Features: Digital RS232 interface standard; RS485 interface optional on two-channel models User-selectable engineering units for both pressure transducers and flow devices Menu-driven with simple set-up and operation Power Supplies/Readouts are designed to control and display any flow transducer. The flow rate set point can be adjusted either through front panel controls or remotely through the rear panel analog interface. The PR4000B Vacuum System Controller is a two channel/sequentially selectable single readout. Compatible with mass flow controllers and mass flow readouts. Signal cables and optional cards for the MKS PR4000B are available on this website.

MKS Cable Connects PR4000 Controller to Terminal Block on 223, 622, 623 Baratron® Capacitance Manometers. MKS Part Number: CB112-2-10. This cable is for the MKS Controllers PR4000, 146, 186, 651, 660 and connects to the terminal block on the 223, 622, 623 Baratron® Capacitance Manometers. These cables are 10 feet long.

MKS Cable Connects PR4000 Controller, Pressure Controllers, Mass-Flo® Controllers and Digital Readouts, and connects to ALL MKS Mass-Flo® Controllers and Mass-Flo® Meters. MKS Part Number: CB147-1-10. This cable is for the MKS PR4000 Controller, 146 or 186, and connects to ALL MKS Mass-Flo® Controllers and Mass-Flo® Meters with 15 pin connectors. These cables are 10 feet long.

MKS Cable for MKS Controllers PR4000, 146, 186, and connects to MKS Mass-Flo® Controllers, Mass-Flo® Controllers and Digital Readouts. MKS Part Number: CB147-7-10. This cable is for the MKS Controllers PR4000, 146, 186, and connects to ALL MKS Mass-Flo® Controllers and Mass-Flo® Meters with 20 pin card edge. These cables are 10 feet long.

MKS Cable for Pressure Controllers PR4000, 146, 186, to 722, 750B 9 Pin Baratron® Capacitance Manometers, Mass Flow Controllers and Digital Readouts. MKS Part Number: CB700-1-10. This cable is for the MKS Controllers PR4000, 146, 186, to 722, 750B Baratron® Capacitance Manometers with 9 pin Connectors, and is 10 feet long.

MKS Cable Connects PR4000 Controller to 750 or 722 Baratron® with 15 pin connectors, Pressure Controllers, Mass Flow Controllers and Digital Readouts. MKS Part Number: CB700-5-10. This cable is for the MKS Controllers PR4000, 146, 186, to 722, 750B Baratron® with 15 pin Connectors Capacitance Manometers. These cables are 10 feet long.

MKS Cable for Pressure Controllers, Mass-Flo® Controllers and Digital Readouts, See List Below. MKS Part Number: CB147-12-10. This cable is for the MKS Controllers PR4000, 146, 186, and connects to ALL MKS Mass-Flo® Controllers and Mass-Flo® Meters with 9 pin connectors. These cables are 10 feet long.