Pfeiffer ONF 1-9 ONF 16 s Oil Mist Eliminator for UNO/DUO 1.6, 2.5, 3, 5, 6 vacuum Pumps, DN/ISO/KF-16 Outlet Flange Pumps. Pfeiffer Part Number: PK Z40 000, Replaces PN: PK Z40 001. For Pfeiffer Pumps up to 12 m3/h (7 CFM). The oil mist filter is fitted to the exhaust port of the rotary vane vacuum pump. It reduces air pollution by operating fluid mist expelled in greater or smaller quantities (depending on the working pressure) from the pump. The filter is not suitable where the pumping of corrosive gases and vapours or those gases which tend to polymerise or which can cause resinification of the oil mist filter is involved. Fits Pfeiffer Rotary Vane Pumps with KF16 Outlet Flanges:Pfeiffer Rotary Vane Pumps: UNO/DUO 1.6, 2.5, 3, 5, 6

PPfeiffer ONF 010 KF10 Horizontal Oil Mist Eliminator for Duo UNO 005 A, UNO/DUO 2.5A /AC KF16 Outlet Flange Pumps Pfeiffer Vacuum Part Number: PK Z40 002 A For Pfeiffer Pumps up to 3 m3/h (2 CFM). The Pfeiffer ONF 010 (KF10) oil mist filter separator is mounted on the exhaust connection of Pfeiffer rotary vane pumps. It prevents air pollution from operating oil mist that is ejected by the pump to a greater or lesser degree depending on the operating pressure. The filter inserts are installed in a housing made of corrosion-resistant aluminum and consist of a cylindrical filter of glass polyester fleece. The filter inserts are opened by an incorporated pressure relief valve when the contamination becomes excessive so that the maximum working pressure of 1.5 bar (absolute) cannot be exceeded. The collected oil mist, now fluid can be observed through the sightglass and discharged with the drain screw. For complete application, specifications and dimensions, download PDF below at AVAILABLE DOWNLOADS. Fits Pfeiffer Rotary Vane Pumps with KF10/16 Outlet Flanges: Pfeiffer Rotary Vane Pumps: UNO 005 A, UNO/DUO 2.5 A, UNO/DUO 2.5 AC

Pfeiffer Oil Return Unit (ORF) for ONF 4-20 Oil Mist Filter Separator to Pfeiffer Rotary Vane Vacuum Pumps Duo 10m, Duo 20m, (PN PK196173-T) These Pfeiffer oil return units puts the oil mist droplets from the ONF 4-20 oil mist elminator back into the rotary vane pump via the gas ballast as a liquid. These products are recommended for Pfeiffer vacuum pump applications that often require cycling of the vacuum chamber to atmosphere. To learn how to install the oil return unit, download the .PDF below at AVAILABLE DOWNLOADS See Section 3.2, Fitting oil return line. Fits Pfeiffer Model Oil Mist Filter ONF 4-20: Rotary Vane Pumps Duo 10m, Duo 20m,

Pfeiffer ONF16S Oil Return Unit from ONF16S Fits/accessory for PK Z40 001 to DUO, PN PPK-005-986-T These Pfeiffer oil return units puts the oil mist droplets from the ONF 16S oil mist elminator back into the rotary vane pump via the gas ballast as a liquid. These products are recommended for Pfeiffer vacuum pump applications that often require cycling of the vacuum chamber to atmosphere. To learn how to install the oil return unit, download the .PDF below at AVAILABLE DOWNLOADS See Section 5.2, Installing the oil return line. Fits Pfeiffer Model Oil Mist Filter ONF 16S, ONF 1-9, ONF 4-20 Pfeiffer Rotary Vane Pumps: UNO/DUO 1.6, 2.5, 3, 5, 6

Pfeiffer ONF 16 Oil Mist Eliminator for Duo 1.5/1.5A to Duo 11/11M, KF16 Outlet Flange Pumps. Pfeiffer Vacuum Part Number: PKZ40003 For Pfeiffer Pumps up to 12 m3/h (7 CFM). The Pfeiffer ONF 16 (KF16) oil mist filter separator is mounted on the exhaust connection of Pfeiffer rotary vane pumps. It prevents air pollution from operating oil mist that is ejected by the pump to a greater or lesser degree depending on the operating pressure. The filter inserts are installed in a housing made of corrosion-resistant aluminum and consist of a cylindrical filter of glass polyester fleece. The filter inserts are opened by an incorporated pressure relief valve when the contamination becomes excessive so that the maximum working pressure of 1.5 bar (absolute) cannot be exceeded. The collected oil mist, now fluid can be observed through the sightglass and discharged with the drain screw. For complete application, specifications and dimensions, download PDF below at AVAILABLE DOWNLOADS. Fits Pfeiffer Rotary Vane Pumps with KF16 Outlet Flanges: Pfeiffer Rotary Vane Pumps: Duo 1.5/1.5A, DUO 1.6/1.6M, Uno/Duo 2.5, Duo 3/3M, Duo 5/5M, Duo 6/6M, Duo 10/10M, Duo 11/11M

Pfeiffer Oil Return Unit (ORF) for ONF16 Oil Mist Filter Separator to Pfeiffer Rotary Vane Vacuum Pumps Uno 2.5, Duo 2.5, Uno 5, (PN PK194315-T) These Pfeiffer oil return units puts the oil mist droplets from the ONF 16 oil mist elminator back into the rotary vane pump via the gas ballast as a liquid. These products are recommended for Pfeiffer vacuum pump applications that often require cycling of the vacuum chamber to atmosphere. To learn how to install the oil return unit, download the .PDF below at AVAILABLE DOWNLOADS See Section 5.2, Installing the oil return line. Fits Pfeiffer Model Oil Mist Filter ONF 16: Rotary Vane Pumps Uno 2.5, Duo 2.5, Uno 5

Pfeiffer ONF 10-12 Oil Mist Eliminator for Duo 10M, DN/ISO/KF 25 Outlet Flange Pumps. Pfeiffer Part Number: PK Z40 004 For Pfeiffer Pumps up to 20 m3/h (12 CFM).The oil mist filter is fitted to the exhaust port of the rotary vane vacuum pump. It reduces air pollution by operating fluid mist expelled in greater or smaller quantities (depending on the working pressure) from the pump. The filter is not suitable where the pumping of corrosive gases and vapours or those gases which tend to polymerise or which can cause resinification of the oil mist filter is involved. PN: PK Z40 004, PKZ40004 Fits Pfeiffer Rotary Vane Pumps with KF25 Outlet Flanges: Pfeiffer Rotary Vane Pumps: Duo 10M

Pfeiffer ONF 25 Oil Mist Eliminator for Duo 10M, Penta 10, KF25 Outlet Flange Pumps PN PKZ40157 For Pfeiffer Pumps up to 10 m3/h (6 CFM).The Pfeiffer ONF 25 (KF25) oil mist filter separator is mounted on the exhaust connection of Pfeiffer rotary vane pumps. It prevents air pollution from operating oil mist that is ejected by the pump to a greater or lesser degree depending on the operating pressure. The filter inserts are installed in a housing made of corrosion-resistant aluminum and consist of a cylindrical filter of glass polyester fleece. The filter inserts are opened by an incorporated pressure relief valve when the contamination becomes excessive so that the maximum working pressure of 1.5 bar (absolute) cannot be exceeded. The collected oil mist, now fluid can be observed through the sightglass and discharged with the drain screw. For complete application, specifications and dimensions, download PDF below at AVAILABLE DOWNLOADS. Fits Pfeiffer Rotary Vane Pumps with KF25 Outlet Flanges: Pfeiffer Rotary Vane Pumps: Duo 10M, Penta 10

Pfeiffer ONF 25L Oil Mist Eliminator for Uno 30, Twin 20-10, Duo 20M, Penta 20, KF25 Outlet Flange Pumps, PN PKZ40158 For Pfeiffer Pumps up to 20 m3/h (12 CFM).The Pfeiffer ONF 25L (KF25) oil mist filter separator is mounted on the exhaust connection of Pfeiffer rotary vane pumps. It prevents air pollution from operating oil mist that is ejected by the pump to a greater or lesser degree depending on the operating pressure. The filter inserts are installed in a housing made of corrosion-resistant aluminum and consist of a cylindrical filter of glass polyester fleece. The filter inserts are opened by an incorporated pressure relief valve when the contamination becomes excessive so that the maximum working pressure of 1.5 bar (absolute) cannot be exceeded. The collected oil mist, now fluid can be observed through the sightglass and discharged with the drain screw. For complete application, specifications and dimensions, download PDF below at AVAILABLE DOWNLOADS. Fits Pfeiffer Rotary Vane Pumps with NW25, KF25 Outlet Flanges: Pfeiffer Rotary Vane Pumps: Uno 30, Duo 20M, Penta 20, Twin 20-10

Pfeiffer Oil Return Unit (ORF) for ONF 16, ONF25, ONF25L Oil Mist Filter Separator to Pfeiffer Rotary Vane Vacuum Pumps Duo 5, Duo 10m, Duo 20m, Twin 20-10, (PN PK196172-T) These Pfeiffer oil return units puts the oil mist droplets from the ONF 16, ONF 25, or ONF 25L oil mist elminator back into the rotary vane pump via the gas ballast as a liquid. These products are recommended for Pfeiffer vacuum pump applications that often require cycling of the vacuum chamber to atmosphere. The installation instruction can be downloaded in PDF format in the available downloads section below (See Section 5.2, Installing the oil return line). Fits Pfeiffer Model Oil Mist Filter ONF 16, ONF 25, ONF 25L: Rotary Vane Pumps Duo 5m, Duo 10m, Duo 20m, Twin 20-10,

NEW ES 25 S Pfeiffer External Silencer KF25 DN25 Inlet and Outlet. For ACP15/28/40 Pumps. Can also be used for dry scroll pump silencing. PN 109873 Use of the External Exhaust Silencer ES 25 S will significantly reduce the noise level when operating ACP Dry Compact Multi-stage Roots Pumps at high pressures. Useds at the Exhaust of Pfeiffer Adixen Alcatel ACP Pumps. Operations Instructions.pdf to the left at Downloads. Fits Pfeiffer Adixen Alcatel Pump Models:Rotary Vane Pumps ACP15, ACP28, ACP40