Ideal Vacuum AC Power Supply Adapter for MKS Granville Phillips 275 Mini Convectron Module and 900 Series Transducer Gauges. Converts 120 VAC to 12 VDC. With 6 foot (1.8 meter) long cable and 15 pin connector. These Ideal Vacuum AC universal power supply wall transformers are for MKS Granville-Phillips® 275 Mini-Convectron® modular vacuum pressure transducers with built in display. They convert 50-60 Hz, 120-240 VAC to 12 VDC, come with 6 foot (1.8 meter) long cable and 15 pin connection.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, 1/8 inch NPT, 275800-EUPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of 1/8 NPT pipe thread, 1/2 inch tubulation. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, 1/8 inch male NPT, 275904-EU-T Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-in adjustable two set points pressure reading and a vacuum connection of 1/8 NPT pipe thread, 1/2 inch tubulation. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, 1/4 inch female VCR, 275801-EU Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of 1/4 inch VCR-type female fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, 1/4 inch female VCR, 275905-EU-T Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-in adjustable two set point pressure reading and a vacuum connection of 1/4 inch VCR-type female fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, 1/2 inch female VCR, 275863-EUPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of 1/2 inch VCR-type female fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, 1/2 inch female VCR. MKS Part Number: 275600-2-GR-T. Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-In adjustable two set points pressure reading and a vacuum connection of 1/2 inch 4 VCR® female fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips® Convectron® Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, 3/8 inch male VCO, 275802-EUPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of 3/8 inch VCO® male fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, 3/8 inch male VCO, 275907-EU-T Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-In adjustable two set points pressure reading and a vacuum connection of 3/8 inc VCO-type male fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, 1.33 inch ConFlat, 275803-EUPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of 1.33 inch Conflat (NW16CF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, 1.33 inch ConFlat, 275908-EU-T Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-in adjustable two set points pressure reading and a vacuum connection of 1.33 inch Conflat (NW16CF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, 2.75 inch ConFlat, 275804-EUPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of 2.75 inch Conflat (NW35CF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, 2.75 inch Conflat, 275909-EU-T Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-in adjustable two set points pressure reading and a vacuum connection of 2.75 inch Conflat (NW35CF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, KF-16, 275400-1-GD-TPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of KF-16 (NW16KF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, KF-16, 275911-EU-T Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-in adjustable two set points pressure reading and a vacuum connection of KF-16 (NW16KF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, KF-25, 275807-EUPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of KF-25 (NW25KF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, With Display, No Setpoints, KF-25, 275600-0-GE-TPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge analog with display pressure reading and comes with no Relay Set Points. With a vacuum connection of KF-25 (NW25KF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, KF-25, 275600-2-GE-T Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-in adjustable two set points pressure reading and a vacuum connection of KF-25 (NW25KF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge, Basic Version, KF-40, Part Number 275400-1-GK-TPower Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge, basic version, comes with one built-in adjustable set point pressure reading and a vacuum connection of KF-40 (NW40KF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Module Gauge with 3-Digit display on the sensor, KF-40, 275913-EU-T Power Supply Not Included, Purchase Seperately P105340 The MKS Granville Phillips 275 mini convectron module gauge comes with a 3-Digit display on the sensor and 2 built-in adjustable two set points pressure reading and a vacuum connection of KF-40 (NW40KF) fitting. This gauge measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 mini convectron module vacuum gauge sensor and repeatability help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium. (Granville Phillips Convectron Controller shown in photographs is available but not included at list price). Modular vacuum gauges are an ideal solution for applications that do not need front panel displays and controls. These compact, convenient, reliable, cost-saving modules have the control electronics mounted directly on the gauge. The all-metal package provides a rugged enclosure and a high level of immunity to electrical noise. Mini-Convectron Modules use the latest electronics technology to operate the Granville-Phillips®Convectron®Gauge. The Convectron Gauge has become an industry standard. It is a unique variation of thermal conductivity gauges where pressure measurement is based on the rate of heat loss from a sensor wire. Unlike traditional thermocouple and Pirani gauges that use only conductive heat loss, Convectron Gauges take advantage of heat loss due to convection at higher pressures. This extends the range of accurate, repeatable measurement to atmosphere.

MKS Granville Phillips 275 Mini Convectron Gauge Module Replacement Tube Sensor Kit 1/8 Inch Male NPT Vacuum Connection. PN: 275810 These MKS replacement tube sensor kits are used to refurbish the 275 Granville Phillips mini convectron gauge module. These replacement sensors are easy to install and will bring your mini convector gauge back to like new condition. The convectron pressure measurement gauge tube sensor is the industry standard convection-enhanced Pirani gauge. The Granville Phillips 275 measures vacuum pressure from atmosphere to 1x10-4 Torr and are ideal for roughing and foreline pressure measurement. It provides reliable fast response measurement, in milliseconds rather than seconds as in the case with thermocouple-type gauges. The high accuracy of the Granville Phillips 275 Convectron vacuum gauge sensor and repeatablilty help insure that processes start at the desired pressure time-after-time. However, they are sensitive to the chemical composition of the gases being measured and are termed a relative pressure measurement method, that is, they determine the pressure indirectly from the thermal conductivity property of the gas medium.