MKS Granville Phillips 370 Stabil-Ion Vacuum Gauge Controller with 6 Setpoint Control Relays, Power Supply, Dual Convectron and RS-232, Torr Readout, 1-Phase 115 VAC. MKS Granville-Phillips Part Number: 370501-A1B-T1 MKS Granville Phillips 370 Stabil-Ion Gauge Controller with 6 Setpoint Control Relays, dual Convectron, RS-232, Torr readout, left mount, side-by-side with power supply for 19-inch rack, 1-Phase 115 VAC. The MKS Granville-Phillips Stabil-Ion vacuum gauge controller combines the latest technology in ionization gauges and control electronics, giving you the most reliable and accurate vacuum pressure measurements for your systems and research. Bright LEDs display the pressures read by the Stabil-Ion and Convectron Gauges. The flexible, modular design offers a range of computer interfaces, 6 setpoint control relays, dual Convectron Gauge operation, and digital display in Torr. If the Stabil-Ion Gauge and memory module are replaced, processing results are much more likely to remain the same. If you need vacuum measurements that are accurate and repeatable over time, the Stabil-Ion Gauge and Controller is your answer. Every Stabil-Ion Gauge is individually calibrated at 15 pressure values and supplied with a memory module matched to its own calibration data. This provides gauge-to-gauge reproducibility which is essential for process replication. Benefits• All-metal, rack-mount controller for Stabil-Ion and Convectron® vacuum gauges is noise-immune and CE compliant• The latest ionization gauge technology provides accurate vacuum pressure measurement from the 10-11 Torr range (10-11 mbar, 10-9 Pa) • Convectron Gauge option extends pressure measurement to atmosphere• 6 Setpoint control relays with 2 per channel• Flexible design allows for optional setpoint relays and digital interfaces• Three-digit display of pressure measurements• Stabil-Ion Gauge with memory module of calibration data• Ultra-clean gauge construction allows rapid response during pumpdown• Dual filaments increase equipment uptime Other features include analog output, selectable emission current, degas timer, and selectable N2/ Ar gas for Convectron. These features are sold separately.

MKS Granville Phillips 370 Stabil-Ion Vacuum Gauge Controller with power supply, Dual Convectron and RS-232, 1-Phase 115 VAC. MKS Granville Phillips Part Number: 370501-A10-T1 MKS Granville Phillips 370 Stabil-Ion Gauge Controller, Left mount, side-by-side with power supply for 19-inch rack, With Dual Convectron, with RS-232 1-Phase 115 VAC. The MKS Granville Phillips Stabil-Ion vacuum gauge controller combines the latest technology in ionization gauges and control electronics, giving you the most reliable and accurate vacuum pressure measurements for your systems and research. Bright LEDs display the pressures read by the Stabil-Ion and Convectron Gauges. The flexible, modular design offers a range of computer interfaces, setpoint control relays, dual Convectron Gauge operation, and digital display in Torr, Millibar, or Pascal to meet your specific requirements. If the Stabil-Ion Gauge and memory module are replaced, processing results are much more likely to remain the same. If you need vacuum measurements that are accurate and repeatable over time, the Stabil-Ion Gauge and Controller is your answer. Every Stabil-Ion Gauge is individually calibrated at 15 pressure values and supplied with a memory module matched to its own calibration data. This provides gauge-to-gauge reproducibility which is essential for process replication. Benefits• All-metal, rack-mount controller for Stabil-Ion and Convectron® vacuum gauges is noise-immune and CE compliant• The latest ionization gauge technology provides accurate vacuum pressure measurement from the 10-11 Torr range (10-11 mbar, 10-9 Pa) • Convectron Gauge option extends pressure measurement to atmosphere• Flexible design allows for optional setpoint relays and digital interfaces• Three-digit display of pressure measurements• Stabil-Ion Gauge with memory module of calibration data• Ultra-clean gauge construction allows rapid response during pumpdown• Dual filaments increase equipment uptime Other features include analog output, selectable emission current, degas timer, and selectable N2/ Ar gas for Convectron. These features are sold separately.

MKS Granville Phillips 370 Stabil-Ion Vacuum Gauge Controller, 2x10-11 Torr to 999 Torr, 60Hz, 115 VAC. MKS Granville Phillips Part Number: 370501-000-T1. The MKS Granville Phillips Stabil-Ion vacuum gauge controller combine the latest technology in ionization gauges and control electronics, giving you the most reliable and accurate vacuum pressure measurements for your systems and research. Bright LEDs display the pressures read by the Stabil-Ion and Convectron Gauges. The flexible, modular design offers a range of computer interfaces, setpoint control relays, dual Convectron Gauge operation, and digital display in Torr, Millibar, or Pascal to meet your specific requirements. If the Stabil-Ion Gauge and memory module are replaced, processing results are much more likely to remain the same. If you need vacuum measurements that are accurate and repeatable over time, the Stabil-Ion Gauge and Controller is your answer. Every Stabil-Ion Gauge is individually calibrated at 15 pressure values and supplied with a memory module matched to its own calibration data. This provides gauge-to-gauge reproducibility which is essential for process replication. Benefits • All-metal, rack-mount controller for Stabil-Ion and Convectron® vacuum gauges is noise-immune and CE compliant• The latest ionization gauge technology provides accurate vacuum pressure measurement from the 10-11 Torr range (10-11 mbar, 10-9 Pa) • Convectron Gauge option extends pressure measurement to atmosphere• Flexible design allows for optional setpoint relays and digital interfaces• Three-digit display of pressure measurements• Stabil-Ion Gauge with memory module of calibration data• Ultra-clean gauge construction allows rapid response during pumpdown• Dual filaments increase equipment uptime Other features include analog output, selectable emission current, degas timer, and selectable N2/ Ar gas for Convectron. These features are sold separately.

MKS Granville Phillips 370 Stabil-Ion Gauge, (UHV Range) with Dual Yttria Coated Iridium Filaments, CF 2.75 Inch Conflat-Type Flange and Calibration Memory Module. MKS Granville Phillips Part Number: 370121 MKS Granville Phillips Stabilion 370 Stabil-Ion Gauge, (UHV Range) with Dual Yttria Coated Iridium Filaments 2.75 Inch Conflat-Type Flange and Calibration Memory Module. All metal gauge tube means no glass breakage, glass decomposition, or helium permeation. Complete electrostatic shield and grounded metal gauge tube housing provides a stable electrical environment and shields against external electrical influences. Burnout resistant filaments. Precision-wound, stress-relieved grid retains shape even after high temperature degassing. Tensioned filaments remain in position over time, providing long-term repeatability. This gauge comes with a memory module, each Stabil-Ion Gauge is individually calibrated and supplied with a memory module matched to its own calibration data. If you replace a Stabil-Ion Gauge on your system, you also replace the memory module supplied with the new gauge and you immediately have a calibrated system again. For use with series 370 Stabil-Ion Gauge Vacuum Measurement Controllers. Download a .PDF Below for complete Specs and Advantages of the Stabil-Ion Vacuum Gauge. PN 370121Works With: MKS Granville Phillips Models 370 Stabli-Ion Gauge Vacuum Measurement Gauge Controller.

MKS Granville Phillips Stabilion 370 Stabil-Ion Gauge, (Extended Range) with Dual Yttria Coated Iridium Filaments, CF 2.75 Inch Conflat-Type Flange and Calibration Memory Module. MKS Granville Phillips Part Number: 370120 MKS Granville Phillips Stabilion 370 Stabil-Ion Gauge, Extended Range with Dual Yttria Coated Iridium Filaments 2.75 Inch Conflat-Type Flange and Calibration Memory Module. All metal gauge tube means no glass breakage, glass decomposition, or helium permeation. Complete electrostatic shield and grounded metal gauge tube housing provides a stable electrical environment and shields against external electrical influences. Burnout resistant filaments. Precision-wound, stress-relieved grid retains shape even after high temperature degassing. Tensioned filaments remain in position over time, providing long-term repeatability. This gauge comes with a memory module, each Stabil-Ion Gauge is individually calibrated and supplied with a memory module matched to its own calibration data. If you replace a Stabil-Ion Gauge on your system, you also replace the memory module supplied with the new gauge and you immediately have a calibrated system again. For use with series 370 Stabil-Ion Gauge Vacuum Measurement Controllers. Download a .PDF Below for complete Specs and Advantages of the Stabil-Ion Vacuum Gauge. PN 370120 Works With: MKS Granville Phillips Models 370 Stabli-Ion Gauge Vacuum Measurement Gauge Controller.

MKS Granville Phillips Power Cable Assembly for MKS Granville Phillips Stabil-Ion 360 or 370 Vacuum Gauge Controllers, for side by side mount, 1.5 ft. MKS Granville Phillips Part Number: 008907 This the MKS Granville Phillips power cable and interconnects to the Stabil-Ion 360 or 370 controller side by side mount. This is the cable ONLY, for the 360 or 370 controller. Stabil-Ion gauges are sold separately.

Cable Assembly for MKS Granville Phillips Stabil-Ion 360 or 370 Vacuum Gauge Controllers, 10 ft. MKS Granville Phillips Part Number: 360116-10 This MKS Granville Phillips signal cable connects to the Stabil-Ion 360 or 370 controller and the Stabil-Ion gauges. This is the cable ONLY, for the 360 or 370 controller. Stabil-Ion gauges are sold separately.

MKS Granville Phillips 370 Stabil-Ion Gauge cable, side-by-side mounting of controller and power supply, 25 ft Long. MKS Granville Phillips Part Number: 360116-25 MKS Granville Phillips Cable for Stabil-Ion Gauge, side-by-side mounting of controller and power supply. Ion gauge controllers, ion gauge tubes, and convectron sensors are also available but sold separately.

MKS Granville Phillips Dual Convectron Gauge Cable connect 303, 307, 316, 333, 340, 350, 358, 360, and 370 to MKS Granville Phillips 275 convectron gauge tubes, 25 ft Long. MKS Granville Phillips Part Number: 303040-25These ion gauge cables connect the MKS Granville Phillips 303, 307, 316, 333, 340, 350, 358, 360 or 370 ion gauge controllers to two MKS Granville Phillips 275 convectron gauge tubes. Ion gauge controllers, ion gauge tubes, and convectron sensors are also available but sold separately.

MKS Granville Phillips GP 360 and 370 Stabil-Ion Vacuum Gauge Controller Cable, Hot Cathode, 150ft. MKS Granville Phillips Part Number: 360116-150 These MKS Granville Phillips 360 and 370 Stabil-Ion vacuum gauge controller cables are extra long having a 150 ft length. These cables are design to operate the Stabil-Ion vacuum gauges. This is the cable only, Stabil-Ion vacuum gauges are sold separately.

MKS Granville Phillips 360 and 370 Stabil-Ion Vacuum Gauge Controller Cable, Hot Cathode, 200ft. MKS Granville Phillips Part Number: 360116-200 These MKS Granville Phillips 360 and 370 Stabil-Ion vacuum gauge controller cables are extra long having a 200 ft length. These cables are design to operate the Stabil-Ion vacuum gauges. This is the cable only, Stabil-Ion vacuum gauges are sold separately.

MKS Granville Phillips Process Control Module, 6 set points for GP 370 Vacuum Gauge Controller. MKS Granville Phillips Part Number: 370107 This is a MKS Granville Phillips Process Control Module and provides the 370 Vacuum Gauge Controller with single-pole, double-throw relays that may be controlled either by (6 digital setpoints) or by the built-in manual override switches. This Process Control Module has 6 user selectable channels. The first 2 channels are assigned to the ion gauges. If present, channels 3 and 4 are assigned to CGA or TCA; and 5 and 6 to CGB, TCB, or CMB. Switches are provided to assign channel 1 to IG1, IG2, or both; and likewise for channel 2. All six channels have selectable polarity for activation above or below the setpoint. For Process Control Card (module) installation procedures see pages 16-27 of instruction manual.pdf. For specs and procedures for use, see Chapter 5 of the instruction manual. This is the Process Control Card Module (with 6 setpoints) ONLY, MKS Granville Phillips 370 Controller, Cables and Accessories sold separately on this website. The MKS Granville Phillips 370 vacuum gauge controller instruction manual in pdf format can be downloaded below.