Fast Access Entry Door, Conflat Flange, CF 4.5 inch, With Window View Port, Stainless Steel Fitting These fast access entry doors include a conflat CF 4.5 inch vacuum flange and allow for quick access to the vacuum chamber. They are often used for load-lock applications. These quick access doors include an optical view port window so that the vacuum system user can see inside the vacuum chamber. They include a manual knob for tightening the access door and are made of stainless steel with Viton o-ring material. These fittings use a copper gasket and knife-edge flanges. The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.

Fast Access Entry Door, Conflat Flange, CF 6.0 inch, With Window View Port, Stainless Steel FittingThese fast access entry doors include a conflat CF 6.0 inch vacuum flange and allow for quick access to the vacuum chamber. They are often used for load-lock applications. These quick access doors include an optical view port window so that the vacuum system user can see inside the vacuum chamber. They include a manual knob for tightening the access door and are made of stainless steel with Viton o-ring material. These fittings use a copper gasket and knife-edge flanges. The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.

Fast Access Entry Door, Conflat Flange, CF 8.0 inch, With Window View Port, Stainless Steel Fitting These fast access entry doors include a conflat CF 8.0 inch vacuum flange and allow for quick access to the vacuum chamber. They are often used for load-lock applications. These quick access doors include an optical view port window so that the vacuum system user can see inside the vacuum chamber. They include a manual knob for tightening the access door and are made of stainless steel with Viton o-ring material. These fittings use a copper gasket and knife-edge flanges. The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.

Fast Access Entry Door, Conflat Flange, CF 10.0 inch, With Window View Port, Stainless Steel FittingThese fast access entry doors include a conflat CF 10.0 inch vacuum flange and allow for quick access to the vacuum chamber. They are often used for load-lock applications. These quick access doors include an optical view port window so that the vacuum system user can see inside the vacuum chamber. They include a manual knob for tightening the access door and are made of stainless steel with Viton o-ring material. These fittings use a copper gasket and knife-edge flanges. The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.

Fast Access Entry Door, Conflat Flange, CF 12.0 inch, With Window View Port, Stainless Steel Fitting These fast access entry doors include a conflat CF 12.0 inch vacuum flange and allow for quick access to the vacuum chamber. They are often used for load-lock applications. These quick access doors include an optical view port window so that the vacuum system user can see inside the vacuum chamber. They include a manual knob for tightening the access door and are made of stainless steel with Viton o-ring material. These fittings use a copper gasket and knife-edge flanges. The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. North American flange sizes are given by flange outer diameter in inches: 1-1/3 ("mini conflat"), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel.

Viton O-Ring for Fast Access Entry Door Seal, View Port, Conflat Flange, CF 4.5 inch. These Viton O-rings contain a rubber elastomer O-ring and are for the door seal on the Fast Access Entry Door CF 4.5 inch blind View Port (P106069) and for the door seal on the Fast Access Entry Door CF 4.5 with the Window View Port (P106065). The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.

Viton O-Ring for Fast Access Entry Door Seal, View Port, Conflat Flange, CF 6.0 inch.These Viton O-rings contain a rubber elastomer O-ring and are for the door seal on the Fast Access Entry Door CF 4.5 inch blind View Port (P106070) and for the door seal on the Fast Access Entry Door CF 6.0 inch with the Window View Port (P106066). The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.

Viton O-Ring for Fast Access Entry Door Seal, View Port, Conflat Flange, CF 8.0 inch. These Viton O-rings are for the door seal on the Fast Access Entry Door CF 8.0 inch blind View Port (P106071) and for the door seal on the Fast Access Entry Door CF 6.0 inch with the Window View Port (P106067). The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.

Viton O-Ring for Fast Access Entry Door Seal, View Port, Conflat Flange, CF 10.0 inch. These Viton O-rings are for the door seal on the Fast Access Entry Door CF 10.0 inch blind View Port (P106072) and for the door seal on the Fast Access Entry Door CF 6.0 inch with the Window View Port (P106068). The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.

Viton O-Ring for Fast Access Entry Door, View Port, Conflat Flange, CF 12.0 inch.These Viton O-rings are for the door seal on the Fast Access Entry Door CF 12.0 inch with Window View Port (P1012620). The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.

Viton O-Ring Window Seal For Fast Access Entry Door, With Window View Port, Conflat Flange, CF 4.5 inch.These Viton O-rings are for the window seal on the Fast Access Entry Door With Window View Port, CF 4.5 inch (P106065). The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.

Viton O-Ring for Window Seal on Fast Access Entry Door, With Window View Port, Conflat Flange, CF 6.0 inch.These Viton O-rings are for the window seal on the Fast Access Entry Door With Window View Port, CF 6.0 inch (P106066). The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.

Viton O-Ring for Window Seal on Fast Access Entry Door, With Window View Port, Conflat Flange, CF 8 inch, CF 10 inch and CF 12 inch.These Viton O-rings are for the window seal on the Fast Access Entry Door With Window View Port, CF 8 inch (P106067), CF 10 inch (P106068) and CF 12 inch (P1012620). The O-ring door seal would limit the high vacuum to 10-8 Torr range and can be heated to 150 °C for bake-out defined by the Viton O-ring.