Keyword Part Number:
MKS HPS® Series 910 DualTrans™ Micropirani Absolute Piezo Transducer, KF16, RS485, PN 910-12030 The 910-12030 DualTrans™ MicroPirani™/Absolute Piezo Vacuum Transducer is designed specifically for wide-range pressure measurement applications and features a size NW16 ISO-KF flange fitting. The combined output provides significantly higher accuracy, stability, repeatability and a faster response time than conventional thermal conductivity gauges. The 910 combines two pressure measurement technologies to provide superior performance and functionality. The 910 provides gas independent absolute pressure measurement from 11 to 1500 Torr with increased accuracy over thermal conductivity sensors. Unlike traditional Pirani gauges, the sensor element in the MicroPirani is made of a one millimeter square silicon chip, allowing the measurements to be made in a very small volume. As a result of the MicroPirani technology, the 910 can read pressures down to 10-5 Torr, two decades below a standard Pirani sensor. The sensor design minimizes the effects of convection, subsequently the 910 can be mounted in any orientation without compromising accuracy. The Piezo is an absolute pressure sensor, providing a direct pressure reading, allowing the measurement to be gas independent. The Piezo sensor measures from less than 1 Torr to 1500 Torr. The 910 has RS485 digital communication interface for setup of transducer parameters and to provide real time pressure measurement. The 910 also has an analog pressure output of 1VDC/decade that can be interfaced to external analog equipment for pressure readout or control. Other analog outputs and curves can be selected via the digital user interface. The 910 has three mechanical relays which can be used for process control, for example interlocking isolation valves and vacuum pumps. Each set point can be assigned either to the piezo measurement or the combined absolute MicroPirani/Piezo measurement. The 910 compact design significantly reduces the amount of space occupied by a vacuum gauge. This is particularly appealing to system designers and allows for a more compact vacuum system.
Condition: New
Part Number: P109830
Price: KD318.61
MKS HPS® Series 910 DualTrans™ Micropirani Absolute Piezo Transducer, KF16, RS232, PN 910-11 The HPS® Series 910 is a dual sensor transducer, combining the pressure measurement technology of Pirani and Piezo with an integrated electronic control circuit. The transducer measurement range is 10-5 to 1,500 Torr. The Piezo is a direct-reading absolute pressure sensor, allowing the measurement to be gas independent. The sensor includes a unique temperature compensation, allowing for high accuracy over a wide measurement range. The Piezo will measure from 10-1 to 1,500 Torr.The MicroPirani performs an autozero function to the Piezo when pressure is below 10-2 Torr. Unlike traditional Pirani gauges, the element in the MicroPirani™ is made of a one millimeter square silicon chip, allowing the measurements to be made in a very small volume. A traditional Pirani sensor has a measuring range from 10-3 to about 100 Torr, rapidly losing sensitivity above 10 Torr. Because the size of the sensing portion of the MicroPirani™ is so small, it has a range down to 10-5 Torr. The design minimizes the effects of convection, so operation is possible in any position without compromising accuracy, for simplified installation. The transducer includes a push button zero control than can be used when pressure is below 10-5 Torr. The Series 910 digital communication allows for all adjustments and monitoring to be delivered real-time, via a host computer. The 910 includes RS485 or RS232 communication as a standard feature. The Series 910 provides a 1 to 9 volt DC analog output signal at the male 15 pin high density D-sub connector. The transducer output is smoothed between the two sensors and reads from both sensors in the 5 to 15 Torr range. For process control, the 910 has three independent relay setpoints. Features of the setpoints can be set, adjusted and monitored through the digital port. Like all thermal conductivity sensors, the MicroPiraniTM is gas-type sensitive. The Piezo measures independent of gas type. The 910 provides a digital leak detection output that measures differential reading between the Piezo and MicroPirani™. This makes it a simple solution for locating medium to fine leaks in vacuum systems. Customers requiring both a power supply and display can use the 910 DualTrans with the PDR900 Series Controller sold on this website. For Complete Specs and Operation Information See AVAILABLE DOWNLOADS Below.Specifications and prices are subject to change without notice. HPS® and MicroPirani™ are a Registered Trademarks MKS Instruments, Inc.Options, (PN) Part Number and Pricing : NEW MKS HPS® Series 910 DualTrans™ Micropirani Absolute Piezo Transducer PN 910-11ISO-KF NW 16, RS-232, PN 910-11, 2009 Price $635ISO-KF NW 16, RS-485, PN 910-12, 2009 Price $6354 VCR-F, RS-232, PN 910-41, 2009 Price $6654 VCR-F, RS-485, PN 910-42, 2009 Price $6658 VCR-F, RS-232, PN 910-51, 2009 Price $6708 VCR-F, RS-485, PN 910-52, 2009 Price $670 All Prices subject to change without notice.
Condition: New
Part Number: P102871
Price: KD334.73
MKS PDR900 Vacuum Gauge Controller for Series 900 Transducers The MKS The PDR900 power supply and readout unit is a stand alone, single channel controller for use with the Series 900 digital vacuum transducers. The instrument sets new standards for vacuum gauge controllers and can be used as a stand-alone power supply readout unit or as a tool for configuration, calibration and diagnostics of system integrated transducers in OEM applications. The PDR900 controller is the ideal solution for vacuum measurement, configuration of digital transducers and advanced system diagnostics. The controller features an easy to use menu-driven user interface, which guides the user through setup and configuration of remote transducer parameters. The readout unit communicates digitally with the transducer which eliminates analog measurement noise coupling via transducer cables. The unit automatically detects the 900 series transducer types, and can be used with both RS232 and RS485 transducers (Not compatible with 909/909A or 903 analog transducers). For Complete Specs and Operation Information See AVAILABLE DOWNLOADS Below.
Condition: New
Part Number: P102879
Price: KD456.40
Ideal Vacuum AC Power Supply Adapter for MKS 910 and 925 MicroPirani Transducers, Converts 120 VAC to 12 VDC, 15 pin connection, 6 foot (1.8 m) cable length. These Ideal Vacuum AC universal power supply wall transformers are for MKS Granville-Phillips® 275 Mini-Convectron® modular vacuum pressure transducers or for MKS Granville-Phillips 900 Series transducers with built in display. These cables convert 50-60 Hz, 120-240 VAC to 12 VDC and connect via a 15 pin connection. Cable length is 6 feet (1.8 m).
Condition: New
Part Number: P1012306
Price: KD41.07