Tapped NPTF Conflat Flange, CF-F 1-1/3 in, Tapped 1/8 in NPTF, Through Holes, Non-Rotatable, Stainless Steel These are CF 1-1/3 inch tapped for 1/8 inch NPTF, Non-Rotatable fittings. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Sold as ONE EACH. Conflat Flange (CF) Tapped 1/8 inch NPTF, 6 Bolt Holes, Non-Rotatable, CF 1-1/3 inches, Stainless Steel Common Dimensions: A=1-1/3 (33mm), B=0.4(12.7mm), C=1/8 NPTF, D=0.25(6.35mm), E=1 1/16(27mm).

Tapped NPTF Conflat Flange, CF-F 1-1/3 in, Tapped 1/4 in NPTF, Through Holes, Non-Rotatable, Stainless Steel These are CF 1-1/3 inch tapped for 1/4 inch NPTF, Non-Rotatable fittings. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Sold as ONE EACH. Conflat Flange (CF) Tapped 1/4 inch NPTF, 6 Bolt Holes, Non-Rotatable, CF 1-1/3 inches, Stainless Steel Common Dimensions: A=1-1/3 (33mm), B=0.53(13.5mm), C=1/4 NPTF, D=0.25(6.35mm), E=1 1/16(27mm).

Tapped NPTF Conflat Flange, CF-F 2-1/8 in, Tapped 1/8 in NPTF, Through Holes, Non-Rotatable, Stainless Steel These are CF 2-1/8 inch tapped for 1/8 inch NPTF, Non-Rotatable fittings. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Sold as ONE EACH. Conflat Flange (CF) Tapped 1/8 inch NPTF, 4 Bolt Holes, Non-Rotatable, CF 2-1/8 inches, Stainless Steel Common Dimensions: A=2-1/8 (54mm), B=0.4(12.7mm), C=1/8 NPTF, D=0.42(10.7mm), E=1 5/8(41.3mm).

Tapped NPTF Conflat Flange, CF-F 2-1/8 in, Tapped 1/8 in NPTF, Through Holes, Non-Rotatable, Stainless Steel These are CF 2-1/8 inch tapped for 1/8 inch NPTF, Non-Rotatable fittings. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Sold as ONE EACH. Conflat Flange (CF) Tapped 1/4 inch NPTF, 4 Bolt Holes, Non-Rotatable, CF 2-1/8 inches, Stainless Steel Common Dimensions: A=2-1/8 (54mm), B=0.53(13.5mm), C=1/4 NPTF, D=0.42(10.7mm), E=1 5/8(41.3mm).

Tapped NPTF Conflat Flange, CF-F 2-3/4 in, Tapped 1/8 in NPTF, Through Holes, Non-Rotatable, Stainless Steel These are CF 2.75 inch tapped for 1/8 inch NPTF, Non-Rotatable fittings. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Sold as ONE EACH. Conflat Flange (CF) Tapped 1/8 inch NPTF, 6 Bolt Holes, Non-Rotatable, CF 2-3/4 inches, Stainless Steel Common Dimensions: A=2 3/4 (70mm), B=0.4(12.7mm), C=1/8 NPTF, D=0.5(12.7mm), E=2 5/16(58.4mm).

Tapped NPTF Conflat Flange, CF-F 2-3/4 in, Tapped 1/4 in NPTF, Through Holes, Non-Rotatable, Stainless Steel These are CF 2.75 inch tapped for 1/4 inch NPTF, Non-Rotatable fittings. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Sold as ONE EACH. Conflat Flange (CF) Tapped 1/4 inch NPTF, 6 Bolt Holes, Non-Rotatable, CF 2-3/4 inches, Stainless Steel Common Dimensions: A=2 3/4 (70mm), B=0.5(12.7mm), C=1/4 NPTF, D=0.5(12.7mm), E=2 5/16(58.4mm).

Tapped NPTF Conflat Flange, CF-F 3-3/8 in, Tapped 1/8 in NPTF, Through Holes, Non-Rotatable, Stainless Steel These are CF 3-3/8 inch tapped for 1/8 inch NPTF, Non-Rotatable fittings. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Sold as ONE EACH. Conflat Flange (CF) Tapped 1/8 inch NPTF, 6 Bolt Holes, Non-Rotatable, CF 3-3/8 inches, Stainless Steel Common Dimensions: A=3-3/8 (85.7mm), B=0.4(10mm), C=1/8 NPTF, D=0.65(16.5mm), E=2 13/16(72mm).

Tapped NPTF Conflat Flange, CF-F 3-3/8 in, Tapped 1/4 in NPTF, Through Holes, Non-Rotatable, Stainless Steel These are CF 3-3/8 inch tapped for 1/4 inch NPTF, Non-Rotatable fittings. ConFlat (CF) flanges are used for ultra-high vacuum applications. These fittings use a copper gasket and knife-edge flanges to achieve the high vacuum seal and can operate down to 10-13 torr (10-11 Pa) and can be heated to 450 °C for bake-out. North American flange sizes are given by flange outer diameter in inches: 1-1/3 (mini conflat), 2¾, 4½, 6, 8, 10, 12, 13¼, 14 and 16½. In Europe and Asia, sizes are given by tube inner diameter in millimeters: DN16, DN40, DN63, DN100, DN160, DN200, DN250. These vacuum fittings are made of corrosive resistant stainless steel. Sold as ONE EACH. Conflat Flange (CF) Tapped 1/4 inch NPTF, 6 Bolt Holes, Non-Rotatable, CF 3-3/8 inches, Stainless Steel Common Dimensions: A=3-3/8 (85.7mm), B=0.53(13.5mm), C=1/4 NPTF, D=0.65(16.5mm), E=2 13/16(72mm).