Thermo Scientific Neslab ThermoFlex 900 Recirculating Chiller, AIR COOLED, T1 Pump, 900 Watt, 115 VAC. Thermo Scientific Part Number: 1011C10500200100. The Thermo Scientific Neslab ThermoFlex 900 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 900 chillers offer the following features: Turbine T1 pump – 3.5gpm at 60 psig 900W (3074 BTU) cooling capacity at 20°C Voltage requirement: 115V/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 2 Years on Pump and Chiller The Thermo Scientific Neslab ThermoFlex 900 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. Deluxe controller with RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 900 Recirculating Chiller, AIR COOLED, T1 Pump, 900 Watt, 115 VAC. DELUXE CONTROLLER w/RS232/RS485. Thermo Scientific Part Number: 1011C20220200100. The Thermo Scientific Neslab ThermoFlex 900 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 900 chillers offer the following features: Turbine T1 pump – 3.5gpm at 60 psig 900W (3074 BTU) cooling capacity at 20°C 115V Voltage requirement: 115V/60Hz, SINGLE PHASE Deluxe Controller with RS232 & RS485 Digital Communications Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 RS232/RS485 Deluxe Controller - Intuitive, large multi line LCD Display w/grahic display & text. Warranty: 2 Years on Pump and Chiller The Thermo Scientific Neslab ThermoFlex 900 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This gives users the flexibility to meet a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 900 Recirculating Chiller, AIR COOLED, P1 Pump, 900 Watt, 115 VAC. Thermo Scientific Part Number: 1011010500200100. The Thermo Scientific Neslab ThermoFlex 900 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 900 chillers offer the following features: Positive Displacement P1 pump – 2.1gpm at 60 psig 900W (3074 BTU) cooling capacity at 20°C 115V Voltage requirement: 115V/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 900 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. Deluxe controller with RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 900 Recirculating Chiller, AIR COOLED, P2 Pump, 900 Watt, 115 VAC. Thermo Scientific Part Number: 1011110500200100. The Thermo Scientific Neslab ThermoFlex 900 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED only (Water cooling not available for this unit) and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 900 chillers offer the following features: Positive Displacement P2 pump – 4.0gpm at 60 psig 900W (3074 BTU) cooling capacity at 20°C 115V Voltage requirement: 115V/60Hz, SINGLE PHASE R134A 19.0 Oz. HIGH 348.0 LOW 200.0 PSI Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 900 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. Deluxe controller with RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 1400 Recirculating Chiller, AIR COOLED, T1 Pump, 1400W, 115 VAC. Thermo Scientific Part Number: 1111C10500200100. The Thermo Scientific Neslab ThermoFlex 1400 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 1400 chillers offer the following features: Turbine T1 pump – 3.5gpm at 60 psig 1400W (4781 BTU) cooling capacity at 20°C Voltage requirement: 115V/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 1400 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. Deluxe controller with RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 1400 Recirculating Chiller, AIR COOLED, P1 Pump, 1400W, 115 VAC. Thermo Scientific Part Number: 1111010500200100. The Thermo Scientific Neslab ThermoFlex 1400 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 1400 chillers offer the following features: Positive Displacement P1 pump – 2.1gpm at 60 psig 1400W (4781 BTU) cooling capacity at 20°C Voltage requirement: 115V/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 1400 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. Deluxe controller with RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 1400 Recirculating Chiller, AIR COOLED, P2 Pump, 1400W, 115 VAC. Thermo Scientific Part Number: 1111110500200100. The Thermo Scientific Neslab ThermoFlex 1400 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 1400 chillers offer the following features: Positive Displacement P2 pump – 4.0gpm at 60 psig 1400W (4781 BTU) cooling capacity at 20°C Voltage requirement: 115V/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 1400 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. Deluxe controller with RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 1400 Recirculating Chiller, AIR COOLED, T1 Pump, 1400W Cooling, 208-230 VAC, RS232/RS485. Thermo Scientific Part Number: 1113C28070200200. The Thermo Scientific Neslab ThermoFlex 1400 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. This Thermo Flex 1400 chillers offer the following features: Turbine T1 pump - 3.5gpm at 60 psig 1400W (4781 BTU) cooling capacity at 20°C Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE RS232 & RS485 Digital/Analog Communication for remote operation, monitoring and data logging Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements - available as an internal or external component Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant - S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 2 Years on Pump and Chiller The Thermo Scientific Neslab ThermoFlex 1400 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 1400 Recirculating Chiller, WATER COOLED, T1 Pump, 1400W Cooling, 208-230 VAC. Thermo Scientific Part Number: 1133C10500200200. The Thermo Scientific Neslab ThermoFlex 1400 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is WATER COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 1400 chillers offer the following features: Turbine T1 pump – 3.5gpm at 60 psig 1400W (4781 BTU) cooling capacity at 20°C Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Water Cooled Condenser uses facility water to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 1400 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. Deluxe controller with RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 2500 Recirculating Chiller, AIR COOLED, T1 Pump, 2500W, 208-230 VAC. Thermo Scientific Part Number: 1213C10500200200. The Thermo Scientific Neslab ThermoFlex 2500 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED only and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 2500 chillers offer the following features: Turbine T1 pump – 3.5gpm at 60 psig 2500W (8538 BTU) cooling capacity at 20°C 208V Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements – available as an internal or external component Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 2 Years on Pump and Chiller The Thermo Scientific Neslab ThermoFlex 2500 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. RS232 & RS485 Digital/Analog Communication for remote operation, monitoring and data logging is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 2500 Recirculating Chiller, WATER COOLED, T1 Pump, 2500W, 208-230 VAC. Thermo Scientific Part Number: 1233C10500200200. The Thermo Scientific Neslab ThermoFlex 2500 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is WATER COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 2500 chillers offer the following features: Turbine T1 pump – 3.5gpm at 60 psig 2500W (8538 BTU) cooling capacity at 20°C Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Water Cooled Condenser uses facility water to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 2 Years on Pump and Chiller The Thermo Scientific Neslab ThermoFlex 2500 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. Deluxe controller with RS232 & RS485 Digital Communications is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 2500 Recirculating Chiller, AIR COOLED, P1 Pump, 2500W, 208-230 VAC. Thermo Scientific Part Number: 1213010500200200. The Thermo Scientific Neslab ThermoFlex 2500 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 2500 chillers offer the following features: Positive Displacement P1 pump – 2.1gpm at 60 psig 2500W (8538 BTU) cooling capacity at 20°C Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 2500 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. RS232 & RS485 Digital/Analog Communication for remote operation, monitoring and data logging is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 2500 Recirculating Chiller, AIR COOLED, P2 Pump 2500W, 208-230 VAC. Thermo Scientific Part Number: 1213110500200200. The Thermo Scientific Neslab ThermoFlex 2500 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 2500 chillers offer the following features: Positive Displacement P2 pump – 4.0gpm at 60 psig 2500W (8538 BTU) cooling capacity at 20°C Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application RS232 & RS485 Digital Communication available on select units Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 2500 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. RS232 & RS485 Digital/Analog Communication for remote operation, monitoring and data logging is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 2500 Recirculating Chiller, WATER COOLED, P2 Pump 2500W, 208-230 VAC. Thermo Scientific Part Number: 1233110500200200. The Thermo Scientific Neslab ThermoFlex 2500 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is WATER COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 2500 chillers offer the following features: Positive Displacement P2 pump – 4.0gpm at 60 psig 2500W (8538 BTU) cooling capacity at 20°C Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Water Cooled Condenser uses facility water to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements (available as an internal or external component) Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 1 Year on Pump – 2 Years on Chiller The Thermo Scientific Neslab ThermoFlex 2500 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. RS232 & RS485 Digital/Analog Communication for remote operation, monitoring and data logging is available on select units. These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 3500 Recirculating Chiller, AIR COOLED, T1 Pump, 3500W, 208-230 VAC. Thermo Scientific Part Number: 1313C10000200200. The Thermo Scientific Neslab ThermoFlex 3500 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is AIR COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 3500 chillers offer the following features:Turbine T1 pump – 3.5gpm at 60 psig 3500W (11953 BTU) cooling capacity at 20°C 208V Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Air Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements – available as an internal or external component Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 2 Years on Pump and Chiller The Thermo Scientific Neslab ThermoFlex 3500 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. RS232 & RS485 Digital/Analog Communication for remote operation, monitoring and data logging is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.

Thermo Scientific Neslab ThermoFlex 3500 Recirculating Chiller, WATER COOLED, T1 Pump, 3500W, 208-230 VAC. Thermo Scientific Part Number: 1333C10020200200. The Thermo Scientific Neslab ThermoFlex 3500 recirculating chillers are designed to provide a continuous supply of fluid at a constant temperature and volume. This unit is WATER COOLED and also offers a refrigeration system, heat exchanger, recirculating pump, polyethylene reservoir, and a microprocessor controller. These Thermo Flex 3500 chillers offer the following features: Turbine T1 pump – 3.5gpm at 60 psig 3500W (11953 BTU) cooling capacity at 20°C 208V Voltage requirement: 208-230 VAC/60Hz, SINGLE PHASE Set Point Temperature Range: +5°C to +40°C Ambient Temperature Range: +10°C to +40°C 7.2 liter (1.9 gallon) Reservoir Volume Water Cooled Condenser uses ambient-temperature room air to remove application heat Pressure relief valve that allows the user to set the maximum fluid pressure to meet application requirements – available as an internal or external component Flow Readout allows for monitoring the flow rate via controller readout Auto Refill allows for automatic refilling from a customer supplied water source to ensure fluid level is maintained Anti-Drainback prevents fluid from flowing back to the reservoir when the chiller is installed below the application Partial flow internal DI cartridge minimizing footprint and proving fluid resistivity between 1 & 3 m0hm SEMI S2 Compliant – S2-0703, S8-0705, S14-0704 & F47-0706 Warranty: 2 Years on Pump and Chiller The Thermo Scientific Neslab ThermoFlex 3500 recirculating chiller offers powerful cooling, expansive temperature ranges, and sophisticated controller technology. RS232 & RS485 Digital/Analog Communication for remote operation, monitoring and data logging is available on select units.These robust, compact units offer precise temperature stability and high reliability for external circulation applications. An industrial-grade force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems. This flexibility meets a wide range of application needs.