Keyword Part Number:
Agilent Varian Wave Washer for TriScroll 600 Series Dry Scroll Vacuum Pumps. Agilent Varian Part Number: S4857001. This is an Agilent Varian OEM wave washer for Triscroll 600 dry scroll pumps.
Condition: New
Part Number: P1011501
Price: Rs रु2,976.97
Agilent Varian TriScroll 300 and 600 Scroll Pump Vibration Isolation Kit With Mounts Screws. Agilent Varian Part Number: PTSVIBISOKIT. This Agilent Varian OEM vibration kit for the TriScroll 300 and 600 vacuum pumps significantly reduces transmitted vibration to the surface on which the pump sits. Typical vibration reduction level is 75 percent for TriScroll 600 and 86 percent for TriScroll 300. Although the rubber mounts are non-skidding, if required, you can additionally secure the pump onto the surface using the two mount flange holes. This requires additional screws, not included. This kit includes a 4 mount set with allen head screws and washers.
Condition: New
Part Number: P103636
Price: Rs रु68,798.20
New Shaft Seal for Varian Triscroll 600 This is a replacement shaft seal for the Agilent Varian Triscroll 600 dry scroll vacuum pump. 22 x 30 x 4 mm. Meets or exceeds OEM specifications.
Condition: New
Part Number: P1010111
Price: Rs रु5,701.39
Crank Pin Needle Bearing for Agilent Varian Triscroll 600 Orbiting Scroll, 8x12x15 mm. These needle bearings, 8x12x15mm, are used on the TriScroll 600 crank pins that hold the orbiting scroll in place. They are a direct replacement for Agilent Varian part number 330024 and meet or exceed OEM specifications. These needle bearings are prepacked with Krytox PFPE vacuum grease and ready to install. Each TriScroll 600 dry scroll vacuum pump requires 3 each and these bearings are also included in the major maintenance kit, Agilent Varian part number PTSS0600MK (sold separately). TriScroll 600 series pumps are designed to provide years of trouble-free service if maintenance procedures and intervals are observed. Bearing grease replenishment and tip seal replacement are recommended when the pump base pressure has risen to an unacceptably high level for your application. Bearings, rotary seals and O-rings should also be replaced if the pump exhibits humming or grinding noises from the bearings. Main bearing life may be shortened if your application requires the pumping of high quantities of water vapor. Use of the bearing purge (P108440) will keep this water from impacting bearing life.
Condition: New
Part Number: P105933
Price: Rs रु11,273.81
Agilent Varian TriScroll 300/600 Crankshaft Bearing, 25x52x15 mm, 7205 Agilent Part Number: S4718005. This is an Agilent Varian OEM replacement for the smaller crankshaft bearing on Triscroll 300 and 600 dry scroll vacuum pumps. TriScroll 600 series pumps are designed to provide years of trouble-free service if maintenance procedures and intervals are observed. Bearing grease replenishment and tip seal replacement are recommended when the pump base pressure has risen to an unacceptably high level for your application. Bearings, rotary seals and O-rings should also be replaced if the pump exhibits humming or grinding noises from the bearings. Main bearing life may be shortened if your application requires the pumping of high quantities of water vapor. Use of the bearing purge will keep this water from impacting bearing life (part number: P1084400).
Condition: New
Part Number: P1011575
Price: Rs रु11,105.89
Agilent Varian TriScroll 300 and 600 Vacuum Pump Purge Gas Kit. Agilent Part Number: PTSPURGEKIT. These Agilent Varian OEM Triscroll purge kits enable the safe, proper purging of the main bearings through the bearing purge port, or through the gas ballast port on Triscroll 300 and 600 series pumps. This kit includes a flowmeter with manual throttle valve, a 5 psig relief valve and necessary tubing and fittings. The following applications require the use of this purge kit with a Triscroll 300 or 600 series pump: Cryopump regeneration Wet chamber cleanup High cycle rate Loadlock Applications Pumping organic solvents Pumping trace amounts of Bromine or Chlorine Pumping residual corrosives
Condition: New
Part Number: P108440
Price: Rs रु130,965.38
Agilent Varian TriScroll 600 Replacement Orbiting Spacer. Agilent Varian Part Number: S4829001. This is an Agilent Varian OEM replacement orbiting spacer ring for the TriScroll 600 dry scroll vacuum Pump. Part #2 shown in the third picture (highlighted in yellow). TriScroll 600 series pumps are designed to provide years of trouble-free service if maintenance procedures and intervals are observed. Bearing grease replenishment and tip seal replacement are recommended when the pump base pressure has risen to an unacceptably high level for your application. Bearings, rotary seals and O-rings should also be replaced if the pump exhibits humming or grinding noises from the bearings. Main bearing life may be shortened if your application requires the pumping of high quantities of water vapor. Use of the bearing purge will keep this water from impacting bearing life.
Condition: New
Part Number: P1011659
Price: Rs रु12,456.00
Agilent Varian Cowling Cover for TriScroll 600 Oil-Free Dry Scroll Vacuum Pumps. Agilent Varian Part Number: S4805001. This Agilent Varian OEM TriScroll 600 cowling cover is used to protect and direct cooling air flow around the pump module. The TriScroll 600 pump module is cooled by a fan on the pump module.
Condition: New
Part Number: P1011855
Price: Rs रु16,428.44
Agilent Varian Triscoll 600 Dry Scroll Pump Exhaust Adapter, 3/8 inch MNPT to KF-25. Agilent Part Number: S4807001. This Agilent Varian OEM Triscroll 600 dry scroll pump exhaust adapter converts the 3/8" NPT female exhaust port to a KF25 fitting for connection to an exhaust line or silencer.
Condition: New
Part Number: P103311
Price: Rs रु16,655.47
Agilent Varian Triscoll 600 Dry Scroll Pump Bypass Port Plunger Guide. Brass. Agilent Varian Part Number: S4820001. This is an Agilent Varian OEM replacement bypass port plunger guide for the TriScroll 600 dry scroll vacuum pump. Made of machined brass.
Condition: New
Part Number: P1012301
Price: Rs रु6,027.84
Agilent Varian TriScroll 300 and 600 Orbiting Scroll Plate Assembly Spieth Locknut. PN: 617919032. Agilent Varian Part Number: 617919032. This Agilent Varian OEM TriScroll 300 and 600 spieth locknut is used to set the depth of the orbiting scroll plate assembly. The orbiting scroll plate assembly must be set to the correct depth on the crankshaft using a depth gauge. The locknut is secured to the crankshaft using a special locknut spanner wrench, and locked in place by the included four M4x12 socket head cap screws.
Condition: New
Part Number: P105433
Price: Rs रु17,345.98
Agilent Varian Triscoll 600 Dry Scroll Pump Exhaust Fitting. Agilent Varian Part Number: S4806001. This is an Agilent Varian OEM exhaust fitting for the Triscroll 600 dry scroll pump.
Condition: New
Part Number: P1010898
Price: Rs रु17,797.36
Agilent varian Intake Screen for Varian TriScroll 600 Oil-Free Dry Scroll Vacuum Pumps, Stainless Steel. Agilent Varian Part Number: S4824001. This Agilent Varian OEM TriScroll 600 intake screen is a filtering device used to protect the pump module from objects that may get sucked in from the roughing line or vacuum chamber. The intake screen is made of stainless steel.
Condition: New
Part Number: P1012144
Price: Rs रु4,547.41
Agilent Varian Intake Spool Fitting for TriScroll 600 Oil-Free Dry Scroll Vacuum Pumps, Aluminium, KF-40. Agilent Varian Part Number: S4809001. This Agilent Varian OEM TriScroll 600 KF-40 intake spool fitting is used to make vacuum connection between the roughing line and the intake to the outboard scroll of the scroll pump module. The intake spool fitting has a machined o-ring groove at its bottom face where a Viton o-ring is compressed to form a vacuum tight seal against the outboard scroll. The intake spool fitting is made of aluminum.
Condition: New
Part Number: P108313
Price: Rs रु17,797.36
Intake Clamp for Agilent Varian TriScroll 600 Dry Scroll Vacuum Pumps, Black Anodized Aluminum. Agilent Varian Part Number: S4708001. This Agilent Varian OEM TriScroll 600 replacement intake clamp is used to secure the intake to the scroll pump module. The clamp is made of black anodized aluminum.
Condition: New
Part Number: P1012397
Price: Rs रु15,238.19
Crank Pin for Agilent Varian Triscroll 600 Dry Scroll Vacuum Pump. This is a replacement crank pin for the Agilent Varian TriScroll 600 dry scroll vacuum pump. The pump requires 3 pins. This listing is for the sale of 1 crank pin. This crank pin meets or exceeds OEM specifications. Three crank pins are included in the Triscroll 600 major repair kits we offer. We also carry minor repair kits for Triscroll 600 pumps as well as other kits and parts for all brands of vacuum pumps.
Condition: New
Part Number: P102805
Price: Rs रु38,906.21
Agilent Varian Three Phase Motor for TriScroll 600 Vacuum Pumps, 3/4 HP, 3-Phase, 208-240/480 VAC. Agilent Varian Part Number: S4842001. This Agilent Varian OEM TriScroll 600 replacement three phase electric motor is used to power the scroll pump module. This is a 3 phase, 3/4 HP motor and requires 208-240 VAC or 480 VAC. The motor attaches to the pump''s transition frame and is joined to the pump modules via a coupler/spider arrangement. S4842001
Condition: New
Part Number: P1010897
Price: Rs रु148,652.58
Agilent Varian Single Phase Motor for TriScroll 600 Vacuum Pumps, 1HP, 1-Phase 115/220 VAC. Agilent Varian Part Number: S4843001. This Agilent Varian OEM TriScroll 600 replacement single phase electric motor is used to power the scroll pump module. This is a 1 phase, 1 HP motor and requires 115 or 220 VAC. The motor attaches to the pump’s transition frame. The motor shaft is joined to the pump modules via a coupler/spider arrangement (sold separately).
Condition: New
Part Number: P1011676
Price: Rs रु168,508.04
Agilent Varian Triscroll 300 Scroll Vacuum Pump Outboard Scroll. Agilent Varian Part Number: S4832001. This is an Agilent Varian OEM Triscroll 300 replacement outboard scroll plate. It does requires special tools to remove and replace.
Condition: New
Part Number: P103624
Price: Rs रु219,234.82
Agilent Varian Triscroll 600 Scroll Vacuum Pump Orbiting Scroll Plate. Agilent Varian Part Number: S4831001. This is an Agilent Varian OEM Triscroll 600 replacement orbiting scroll plate. It does requires special tools to remove and replace.
Condition: New
Part Number: P103623
Price: Rs रु171,519.94
Agilent Varian Triscroll 600 Scroll Vacuum Pump Inboard Scroll Plate. Agilent Varian Part Number: S4830001. This is an Agilent Varian OEM Triscroll 600 replacement inboard scroll plate. It does requires special tools to remove and replace.
Condition: New
Part Number: P103622
Price: Rs रु253,674.22
Agilent Varian TriScroll 600 Dry Scroll Complete Pump Module. Agilent Varian Part Number: S4800304. This Agilent Varian OEM complete pump module for the TriScroll 600 dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.The new module is easy to install and requires only simple tools. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty.
Condition: New
Part Number: P104683
Price: Rs रु793,352.93
Regular Price: Rs रु1,098,363.84
Agilent Varian Triscroll 620 Dry Scroll Complete inBin Module. Agilent Varian Part Number: S4800315. This Agilent Varian OEM inBin module for the TriScroll 620 dry scroll vacuum pump is an excellent alternative to sending your pump in for rebuild service.This module includes the Outboard, Orbiting and Inboard Scrolls. Replacement does require some special tools. A new module will turn your old pump into a new pump at a fraction of the new cost. Pump modules are new with factory 1 year warranty.
Condition: New
Part Number: P109946
Price: Rs रु1,141,890.00
Agilent Varian Triscroll 300 and 600 Scroll Vacuum Pump Rebuilt and Service Maintenance Tool Kit Set. Agilent Varian Part Number: PTSS0600TK. This Agilent Varian TriScoll 300 and 600 tool kit comes complete with all fixtures and tools required to perform any maintenance on TriScroll 300 and 600 dry scroll vacuum pumps. The center orbiting scroll of a TriScroll vacuum pump is a two stage design which needs to be correctly spaced following the rebuild procedure. Included in this set is the special spanner wrench and depth gauge needed to set the correct tip seal depth.
Condition: New
Part Number: P107271
Price: Rs रु381,928.62