Ideal Vacuum 10-Foot Cable for Parker Series 9 High-Speed Pulsed Solenoid Valves to Ideal Vacuum Pulsar Pulse Valve Driver. Works with Both Ideal Spectroscoy Pulsar and Parker Series 9 Pulsed Solenoid Valves. This cable connects the Ideal Vacuum Pulsar pulse valve controller or a Parker Iota 1 valve controller to a Parker Series 9 pulsed solenoid valves. It can also be used to connect to an Ideal Vacuum High-Speed Pulsed Solenoid Valve. The cable length is 10 feet. The Pulsar is a benchtop or rack mountable driver for high-speed solenoid valves (28 VDC) and is compatible with both Parker Series 9 and Ideal Vacuum pulse valves. Pulse duration ranges in microseconds, milliseconds, or longer can be selected. The Pulsar is often used to generate pulsed molecular beam sources for laser spectroscopy experiments. Short, timed, supersonic gas pulses can be generated to deliver the sample to a laser pulse when it arrives, dramatically reducing the amount of sample used compared to continuous jet systems. Short, supersonic pulses get very cold as the gas expands, reducing doppler broadening and spectral complexity.

Ideal Vacuum Valve Rebuild Kit with PTFE Poppets for Ideal Vacuum High-Speed Pulsed Valves and Parker Series 9 Valves. Compare with Parker Part Number: 009-PTFE-KIT. This is an Ideal Vacuum High-Speed Pulsed Valve rebuild kit with PTFE poppets and a TeflonTM coated armature. It is compatible with Parker Series 9 pulse valves and Ideal Vacuum High-Speed Pulsed Solenoid Valves. Kit Contents: 10 x PTFE Poppets. 5 x Buffer Springs. 5 x Load Springs. 5 x Internal Viton® O-Rings. 5 x External Viton O-Rings. 1 x Teflon Coated Armature. 10 x Extra-Thin Shims, 316 Stainless Steel. 10 x Thin Shims, 316 Stainless Steel. 10 x Medium Thickness Shims, 316 Stainless Steel. 10 x Thick Shims, 316 Stainless Steel. Teflon and Viton are registered trademarks of The Chemours Company FC, LLC.

Replacement PTFE Poppets for Parker Series 9 and Ideal Vacuum High-Speed Pulsed Solenoid Valves. Sold as Pack of 50 Poppets. Compare with Parker Part Number 003-0023-050-KIT. These PTFE poppets are compatible with Parker Series 9 pulse valves and Ideal Vacuum High-Speed Pulsed Solenoid Valves. The poppet forms the vacuum seal at the pulse valve output orifice when the valve is closed. PTFE is soft, so the poppets will become deformed with use and need to be replaced. For best results, poppets need to be replaced after no more than 1 month of regular use. Exposure to certain chemicals or elevated temperatures may cause poppets to need replacement more often, even as often as once per day. This kit contains 50 poppets.

Replacement Viton External O-Rings for Parker Series 9 and Ideal Vacuum High-Speed Pulsed Solenoid Valves. Sold as Pack of 10 O-Rings. These are replacement external O-Rings compatible with Parker Series 9 pulse valves and Ideal Vacuum High-Speed Pulsed Solenoid Valves. The external O-ring forms a vacuum-tight seal between the valve body, which contains the output orifice or nozzle, and the vaccum chamber or item under test. These O-rings are made of chemically-resistant Viton® for use in vacuum or mild to moderate chemical environments. See drawing below for external O-ring replacement location. Viton is a registered trademark of The Chemours Company FC, LLC.

Replacement Viton Internal O-Rings for Parker Series 9 and Ideal Vacuum High-Speed Pulsed Solenoid Valves. Sold as Pack of 10 O-Rings. These are replacement internal O-Rings compatible with Parker Series 9 pulse valves and Ideal Vacuum High-Speed Pulsed Solenoid Valves. The internal O-ring forms a pressure-tight seal which can withstand up to 250 PSIG between the valve body, which contains the output orifice or nozzle, and the solenoid coil assembly. These O-rings are made of chemically-resistant Viton® for use in vacuum or mild to moderate chemical environments. See drawing below for internal O-ring replacement location. Viton is a registered trademark of The Chemours Company FC, LLC.

Replacement Uncoated Armature for Parker Series 9 and Ideal Vacuum High-Speed Pulsed Solenoid Valves. Sold as One Each. This is a replacement double-Teflon-coated armature compatible with Parker Series 9 pulse valves and Ideal Vacuum High-Speed Pulsed Solenoid Valves. The armature is a stainless-steel rod that actuates the valve when a magnetic field is induced by the solenoid coil assembly. Abrasion-resistant black Teflon™ double-coated armatures are typically more chemically resistant and have faster, more-consistent actuation times than uncoated armatures. See drawing below for armature replacement location. Teflon is a registered trademark of The Chemours Company FC, LLC.

Replacement Uncoated Armature for Parker Series 9 and Ideal Vacuum High-Speed Pulsed Solenoid Valves. Sold as One Each. This is a replacement uncoated armature compatible with Parker Series 9 pulse valves and Ideal Vacuum High-Speed Pulsed Solenoid Valves. The armature is a stainless-steel rod that actuates the valve when a magnetic field is induced by the solenoid coil assembly. Teflon™ coated armatures are typically more chemically resistant and have faster, more-consistent actuation times than uncoated armatures. However, some chemicals are destructive to Teflon and will perform better with an uncoated armature. See drawing below for armature replacement location. Teflon is a registered trademark of The Chemours Company FC, LLC.

Replacement Stainless Steel Main Load Spring for Parker Series 9 and Ideal Vacuum High-Speed Pulsed Solenoid Valves. Sold as Pack of 5 Springs. These are replacement stainless steel main load springs compatible with Parker Series 9 pulse valves and Ideal Vacuum High-Speed Pulsed Solenoid Valves. The main load spring provides the closing force for the valve when the solenoid coil is de-energized. If the main load spring becomes corroded, brittle, or broken, due to long-term use or chemical exposure the valve will fail to close properly. See drawing below for spring replacement location.

Replacement Stainless Steel Buffer Spring for Parker Series 9 and Ideal Vacuum High-Speed Pulsed Solenoid Valves. Sold as Pack of 5 Springs. These are replacement stainless steel buffer springs compatible with Parker Series 9 pulse valves and Ideal Vacuum High-Speed Pulsed Solenoid Valves. The buffer spring assists with valve armature alignment and performance tuning. If the buffer spring becomes corroded, brittle, or broken, due to long-term use or chemical exposure the valve will perform eratically or fail to open when energized. See drawing below for spring replacement location.