Skip to main content
× Home Services Products Catalogs Downloads TechSupport About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
Cart
 
Login Icon
Login
Language Selector
en-nz
×
Americas
Europe
Middle East & Africa
Asia Pacific & Japan
Agilent IDP-7 Dry Scroll Vacuum Pumps On Sale Ideal Vacuum XG-110 Portable Digital Thermocouple Controllers On Sale Edwards nEXT300D TStations On Sale Ideal Vacuum XGC-320 Portable Digital Thermocouple Controllers On Sale Agilent TriScroll Pumps On Sale Pfeiffer ASM340 Leak Detectors On Sale

Keyword       Part Number:      

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC Vacuum Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
×

Load

Product Image 1
Product Image 2
Product Image 3

MKS Series 225 Auto-Soft Start Check Valve - Flow Actuated - Spring Loaded - SS - Viton - NW50 KF50 Centering Ring

Condition:
  New
Part Number:
  P1010147
Warranty:
  Full Manufacturer's Warranty

Available Now   4  

Sale: NZ$716.20

MKS Series 225 Auto-Soft Start Check Valve - Flow Actuated - Spring Loaded - SS - Viton - NW50 KF50 Centering Ring 716.2
Currency: New Zealand Dollar (NZD)

Description

MKS Series 225 Auto-Soft Start Check Valve Flow Actuated, Spring Loaded, No Voltage
NW50 KF50 Viton Centering Ring - STAINLESS STEEL

The MKS Series 225 Auto-Soft is a flow actuated check valve used for throttling roughing pumps during initial evacuation. Auto-Soft closes very quickly at the start of system evacuation and opens automatically upon reaching a set pressure differential. This leaves the pumping line open for the balance of the pumping process.

This is a simple NW KF Valve fitting for automatic soft starts. The Auto-Soft valve has a vane that pivots about an off-center axis. A pair of coil springs hold the vane open when the pressure differential is low enough. When the roughing system goes into operation, the initial flow closes the vane assembly, automatically throttling the roughing pump. Initial pumpdown occurs through small openings around the vane. This reduces the effective pumping speed, which minimizes turbulence and extends pumpdown time. When the pressure differential reaches the level determined by the springs, the springs open the vane and full pumping speed is restored.

When installing the Auto-Soft, adequate space is needed, the amounts are listed in the specifications table. The user can adjust the closed conductance of the valve over a limited range by bending tabs adjacent to the vane. The Auto-Soft should be installed between the vacuum system and the roughing valve. Trapping of contamination before the Auto-Soft will help to ensure a long life.

FEATURES & BENEFITS:
  • Reduces particulate contamination by reducing system turbulence during venting
  • Prevents displacement or breakage of substrates
  • Replaces expensive pressure controlled bypass systems
  • No electric - flow actuated
  • Operates up to 10,000 cycles
For a complete explanation of this MKS Auto-Soft Check Valve see .pdf to the side.

Brochure

Marca de agua con el logotipo de Ideal Vacuum
CONTACT US
Ideal Vacuum Products , LLC
5910 Midway Park Blvd NE
Albuquerque, New Mexico 87109-5805 USA

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com



Press ESC to Close


deepbox image 2
load time = 1.9258