NEW Edwards FL20K (FL-20-K) Foreline Inlet Trap - For all KF25 Rotary Vane Pumps (Edwards Part Number A133-05-000) The Edwards FL20K (FL-20-K) foreline inlet trap has been developed for use in clean pumping systems, to prevent the back-migration of rotary pump oil mist into the system. This trap contains activated alumina sorbent. The activated alumina sorbent has the following benefits; Exceptional trapping properties for oil mist (99.7%), A very long life before it is saturated, and Can be rejuvenated by baking the basket containing the sorbent for 2 hours at 250 °C – 300 °C. The FL20K is most useful with two-stage rotary pumps, operating below 1 mbar. To maximize sorbent life, install the FL20K near the vacuum system. In common with other types of sorbent, activated alumina absorbs water. This does not affect the oil vapor trapping properties but may tend to prolong the roughing time on successive pump downs. To minimize vapor absorption, we recommend you fit a valved by-pass line. The trap body is made of aluminum and is fitted with a removable basket containing the sorbent. Extra sorbent activated alumina is available on this website. This Edwards FL20K foreline trap is supplied and a can of activated alumina sorbent. For complete specifications download instruction manual (see below avaliable downloads). Edwards FL20K (FL20K) Foreline Trap Specifications: Fits Pump Models: RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, E2M28 and E2M30 Inlet & Exhaust Flanges: ISO KF25 (NW25) Dimensions: Height 5.5 x Width 4 inches Weight: 1.5 lb Material: Cast Aluminum Body Element: Supplied with can of alumina sorbent Replacement 0.45 kg Media Part Number: H026-00-050 Edwards FL20K (FL-20-K) Part Number: A133-05-000

NEW Activated Alumina For Edwards FL20K Foreline Inlet Trap - 0.45kg container size (Edwards Part Number H026-00-050) This is a 0.45 kg container of activated alumina for the Edwards FL20K Foreline Inlet Trap. The activated alumina sorbent has the following benefits; Exceptional trapping properties for oil mist (99.7%), A very long life before it is saturated, and Can be rejuvenated by baking the basket containing the sorbent for 2 hours at 250 °C – 300 °C. To maximize sorbent life, install the FL20K near the vacuum system. In common with other types of sorbent, activated alumina absorbs water. This does not affect the oil vapor trapping properties but may tend to prolong the roughing time on successive pump downs. For complete specifications download the instruction manual (see below avaliable downloads). Activated Alumina Media Specifications: For Pump Models: RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, E2M28 and E2M30 Weight: 0.45 Kg Material: Activated Alumina For Use In FL20K: A133-05-000 Edwards Part Number: H026-00-050

NEW Edwards ITF20K (ITF-20-K) Vacuum Pump Inlet Dust Filter - KF25 (Edwards Part Number A442-15-000) The ITF20K (ITF-20-K) Inlet Dust filters prevent the entry of dust particles in the pump. The impedance of a clean filter reduces the pumping speed of a 20 m3h-1 pump by about 20% at 1 mbar and 25% at 10 mbar. Depending on your application, you can normally clean the filter element with a vacuum cleaner or a clean air blast, and then re-use the filter element. THIS DUST FILTER DOES COME WITH FILTER ELEMENT. The Benefits of the Inlet Dust Filter includes: Thick aluminum castings, to withstand abrasion, Tangential entry port, to promote centrifugal separation of dust particles, Filter efficiency better than 96% (tested to BS2831, dust number 2). For complete specifications download instruction manual.....see below (AVAILABLE DOWNLOADS) Edwards ITF20K (ITF-20-K) Fit & Size: Fits Edwards RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, E2M28 and E2M30 Rotary Vane Oil Sealed Vacuum Pumps. KF25 inlet, KF25 outlet, Weight 3.5 kg. Edwards Part Number A442-15-000

NEW Edwards Dust Filter Element and Gasket Kit for ITF20K Inlet Dust Filter part no. A442-01-800 These Edwards ITF20K ITF-20-K dust element prevents the entry of dust particles in the pump. The impedance of a clean filter reduces the pumping speed of a 20 m3h-1 pump by about 20% at 1 mbar and 25% at 10 mbar. Filter efficiency better than 96% (tested to BS2831, dust number 2). For complete specifications download the instruction manual (see below avaliable downloads). Edwards ITF20K (ITF-20-K) Filter Media Replacement Specifications: Weight: .5 Kg For Use With: Edwards PN A442-15-000

NEW Edwards ITC20K Inlet Chemical Trap - KF25 (Edwards Part Number A444-10-000)The Edwards ITC20K Series Chemical Trap Provides the following benefits: Protection against various aggressive or heavy lacquer forming vapors, which may attack the pump or contaminate pump oil. Prevent high molecular weight vapors (such as might arise in a resin treatment plant), from reaching the pump. These vapors could cause lacquering or clogging. The standard sorbent charcoal (activated carbon), has relatively high trapping properties (absorbs around 25% of its own weight), even when large amounts of water vapor are being pumped. DOES NOT Come with sorbent media charcoal (activated carbon) charge. Carbon charge size for this unit is 0.4 kg. Comes with KF25 clamp, centering ring and o-ring. All replacement activated carbon sorbent media for this Chemical Trap is sold on this website. 0.5 kg and 3 kg charcoal (activated carbon) containers are available on this website. For complete specifications download instruction manual.....see below (AVAILABLE DOWNLOADS)Fit & Size: Fits Edwards RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, E2M28 and E2M30 Rotary Vane Oil Sealed Vacuum Pumps. KF25 inlet, KF25 outlet. Weight 3.5 kg.Edwards Part Number A444-10-000

NEW Edwards ITO20K Inlet CATCHPOT - KF25 (Edwards Part Number A441-10-000)The Edwards ITO20K Inlet CATCHPOT Provides the following benefits: The ITO Inlet Catchpot is used on vacuum processes where large quantities of vapour are produced. The catchpot traps liquid that would otherwise condense in the pipelines and drain towards the pump. The catchpot is also suitable for use on vacuum processes where froth or spray can go into the pump. The mixture of gas and liquid droplets enters the inlet of the catchpot. The liquid collects in the base of the body and the gas passes through the outlet into the pump. You can see the level of the trapped liquid through the sight-glass. You can drain the trapped liquid from the catchpot through the drain-plug. NOTE: The CATCHPOT DOES NOT have the media trapping material like the ITC Chemical Trap. For complete manual see .pdf to the side at Downloads. Fit & Size: Fits Edwards RV3, RV5, RV8, RV12, E2M2, E2M5, E2M8, E2M12, E1M18, E2M18, E2M28 and E2M30 Rotary Vane Oil Sealed Vacuum Pumps. KF25 inlet, KF25 outlet. Weight 3.5 kg.Edwards Part Number A44110000

Charcoal (Activated Carbon) For Edwards ITC20K (ITC-20-K) Inlet Chemical Trap 5 kg container size. Edwards Part Number: 17810 (5kg) Replaces PN: H122-05-002 (3kg). This is a 5 kg container of charcoal (activated carbon) for the Edwards ITC20K (ITC-20-K) Inlet Chemical Trap. The ITC20K (ITC-20-K) Inlet Chemical part number is A442-15-000.The standard sorbent charcoal (activated carbon), has relatively high trapping properties (absorbs around 25% of its own weight), even when large amounts of water vapor are being pumped. The standard amount the ITC20K Inlet Chemical Trap holds is 0.4kg of charcoal (activated carbon). Edwards ITC20K (ITC-20-K) Fit & Size: AC35 Steam Activated Carbon for Edwards ITC20K Inlet Chemical Trap. Weight 5 kg. Edwards Part Number: 17810.

Inlet Filter for Edwards EDM6, EDM12, EDM20, ED75, ED100, ED150, ED200 Rotary Vane Vacuum Pumps, Stainless Steel Mesh PN: 01403026 This conical Stainless Steel Inlet Filter fits Edwards rotary vacuum pumps, models EDM6, EDM12, EDM20, ED75, ED100, ED150, ED200 This filter is used on the pump's inlet when there is the possibility of large dust particles or debris entering the pump during operation. Dust and particles entering the pump can cause increased wear and/or damage to the pump. This inlet filter can be used on many other rotary vane pumps requiring large particulate filtering at the inlet.

Inlet Filter for all Edwards E1M175, E1M275, E2175, E2M275 including S Models, Rotary Vane Vacuum Pumps, Stainless Steel Mesh PN: 22305011 This conical Stainless Steel Inlet Filter fits all Edwards rotary vacuum pumps models E1M175, E1M275, E2M175, E2M275, including S versions. This filter is used on the pump's inlet when there is the possibility of large dust particles or debris entering the pump during operation. Dust and particles entering the pump can cause increased wear and/or damage to the pump. This inlet filter can be used on many other rotary vane pumps requiring large particulate filtering at the inlet.

NEW Edwards ITO800 Inlet Catchpot, ISO100, (Edwards Part Number A441-04-000) This NEW ITO800 Inlet Catchpot is used on vacuum processes where large quantities of vapour are produced. The catchpot traps liquid that would otherwise condense in the pipelines and drain towards the pump. The catchpot is also suitable for use on vacuum processes where froth or spray can go into the pump. The mixture of gas and liquid droplets enters the inlet of the catchpot, then the liquid collects in the base of the body and the gas passes through the outlet into the pump. You can see the level of the trapped liquid through the sight-glass on the top of the catchpot. You can drain the trapped liquid from the catchpot through the drain-plug. For complete specifications, download instruction manual.....See below (AVAILABLE DOWNLOADS) Edwards ITO800 Inlet Catchpot Fit & Size: Fits Edwards E1M175, E2M175, E1M275, E2M275 Rotary Vane Oil Sealed Vacuum Pumps. ISO100 KF100 inlet and outlet flange Weight Mass: 19.5 kg, 43 lb. Capacity: 9.5 liter, 10 qt. Supplied with 100mm Co-Seal, bolts and washers Edwards Part Number A441-04-000

Rebuilt Edwards ITO800 Inlet Catchpot, ISO100 The Rebuilt ITO800 Inlet Catchpot is used on vacuum processes where large quantities of vapour are produced. The catchpot traps liquid that would otherwise condense in the pipelines and drain towards the pump. The catchpot is also suitable for use on vacuum processes where froth or spray can go into the pump. The mixture of gas and liquid droplets enters the inlet of the catchpot, then the liquid collects in the base of the body and the gas passes through the outlet into the pump. You can see the level of the trapped liquid through the sight-glass on the top of the catchpot. You can drain the trapped liquid from the catchpot through the drain-plug. For complete specifications, download instruction manual.....See below (AVAILABLE DOWNLOADS) Edwards ITO800 Inlet Catchpot Fit & Size: Fits Edwards E1M175, E2M175, E1M275, E2M275 Rotary Vane Oil Sealed Vacuum Pumps. ISO100 KF100 inlet and outlet flange Weight Mass: 19.5 kg, 43 lb. Capacity: 9.5 liter, 10 qt.