NEW Inficon PCG 550 Pirani Capacitance Diaphragm Gauge w/ NW-KF 16 Fitting, Tungsten Filament, Torr Measurement, LCD Display, D Sub 15 pin HD Connector, 1.2 - 8.68V Measurement Range, PN 3PC1-011-1201 The INFICON Pirani Capacitance Diaphragm Gauge PCG550 combines the INFICON Pirani technology with the advantages of a ceramic capacitance diaphragm sensor in a single product. In the measurement range between 10 mbar and atmosphere the capacitance diaphragm technology provides gas-type independent, highly accurate values for reliable pressure measurement. The PCG550 offers also a variety of features which allows the right product configuration for the demanded application. This Gauge has a D Sub 15 pin HD Connector and a 1.2 - 8.68V Measurement Range. This Gauge has a Pressure Measurement Range of 5×10-5 mbar, 3.8X10-5 Torr. This PCG550 Pirani Capacitance Diaphragm Gauge can work with virtually any Vacuum Pump or Vacuum Pump System with the proper INFICON signal cable. This gauge has a D-Sub, 15-pin HD Connector and a cable must be made for signal connection. For instructions see the Operating Manual Section 3.2.4 page 33 below.

NEW Inficon PCG 550 Pirani Capacitance Diaphragm Gauge w/ NW-KF 16 Fitting, , LCD Display, RJ45 Ethernet connector PN: 3PC1-001-4000 The INFICON Pirani Capacitance Diaphragm Gauge PCG550 combines the INFICON Pirani technology with the advantages of a ceramic capacitance diaphragm sensor in a single product. In the measurement range between 10 mbar and atmosphere, the capacitance diaphragm technology provides gas-type independent, highly accurate values for reliable pressure measurement. The PCG550 also offers a variety of features which allows the right product configuration for the demanded application. This Gauge has a RJ45 Ethernet Connector. This Gauge has a Pressure Measurement Range of 5×10-5 mbar, 3.8X10-5 Torr. This PCG550 Pirani Capacitance Diaphragm Gauge can work with virtually any Vacuum Pump or Vacuum Pump System with the proper INFICON signal cable. This gauge has a RJ45 Ethernet Connector and a cable must be made for signal connection.

NEW Inficon PCG 550 Pirani Capacitance Diaphragm Gauge w/ NW-KF 16 Fitting, Tungsten Filament, Torr Measurement, LCD Display, D Sub 15 pin HD Connector, 1.2 - 8.68V Measurement Range, 2 set points, PN 3PC1-011-5201 The INFICON Pirani Capacitance Diaphragm Gauge PCG550 combines the INFICON Pirani technology with the advantages of a ceramic capacitance diaphragm sensor in a single product. In the measurement range between 10 mbar and atmosphere the capacitance diaphragm technology provides gas-type independent, highly accurate values for reliable pressure measurement. The PCG550 offers also a variety of features which allows the right product configuration for the demanded application. This Gauge has a D Sub 15 pin HD Connector and a 1.2 - 8.68V Measurement Range with 2 set points. This Gauge has a Pressure Measurement Range of 5×10-5 mbar, 3.8X10-5 Torr. This PCG550 Pirani Capacitance Diaphragm Gauge can work with virtually any Vacuum Pump or Vacuum Pump System with the proper INFICON signal cable. This gauge has a D-Sub, 15-pin HD Connector and a cable must be made for signal connection. For instructions see the Operating Manual Section 3.2.4 page 33 to the side at Downloads.

Inficon PCG 550 Pirani Capacitance Diaphragm Gauge, NW-KF 16 Fitting, Tungsten Filament, Mbar Measurement, D Sub 9 pin Connector, 1.2 - 8.68V Measurement Range, 2 set points, EtherCat® Interface. Inficon Part Number: 3PC1-001-2181. The Iinficon Pirani Capacitance Diaphragm Gauge PCG550 combines the Inficon Pirani technology with the advantages of a ceramic capacitance diaphragm sensor in a single product. In the measurement range between 10 mbar and atmosphere the capacitance diaphragm technology provides gas-type independent, highly accurate values for reliable pressure measurement. The PCG550 offers also a variety of features which allows the right product configuration for the demanded application. This Gauge has a D Sub 9 pin Connector and a 1.2 - 8.68V Measurement Range with 2 set points and EtherCAT Interface. This Gauge has a Pressure Measurement Range of 5×10-5 mbar (3.75X10-5 Torr) to 1500 mbar (1125 Torr). This PCG550 Pirani Capacitance Diaphragm Gauge can work with virtually any Vacuum Pump or Vacuum Pump System with the proper Inficon signal cable. This gauge has a D-Sub, 9-pin Connector, EtherCAT Interface. The gauge is intended for operation in connection with an Inficon Vacuum Gauge Controller VCG401, 402, 403 or withanother suitable controller. For complete specifications of the PCG550 Capacitance Diaphragm Gauge see the Specification Sheet/Brochure.pdf and for complete Instruction for use see the Operating Manual .pdf, both in the Downloads.

Inficon PSG550 Pirani Standard Gauge Tungsten Filament, mBar Measurement, DN 16 ISO-KF Fitting, D Sub 9 pin Connector, 2 set points Solid State, EtherCAT® Interface, 1.2 - 8.5V Measurement Range. Inficon Part Number: 3PI1-001-21G1. This is a Inficon Pirani Standard Gauge PSG550. The Inficon Pirani Standard Gauge (PSG55x) employs the most advanced digital Pirani technology available. The rugged sensor design combined with the compact size and the variety of features qualifies as the right product for measurement from low to the high vacuum range. This Gauge has a D Sub 9 pin Connector and a 1.2 - 8.5V Measurement Range with 2 set points and EtherCAT Interface. This Gauge has a Pressure Measurement Range of 5x10-5 mbar (3.75X10-5 Torr) to 1000 mbar (750Torr). This PSG550 Pirani Standard gauge can work with virtually any vacuum pump or vacuum pump system with the proper Inficon signal cable. This gauge has a D-Sub, 9-pin connector, EtherCAT interface. NOTE: Since this gauge is configured for EtherCAT 1, it is not intended to be used with a controller. For complete specifications of the Standard PSG550 gauge see the brochure .pdf, and for complete operation instructions see the instruction manual .pdf, both at the Downloads section.

Inficon PCG552 Pirani Capacitance Diaphragm Gauge, Nickel Filament, mBar, DN 16 ISO-KF Fitting, 2 set points, D-Sub 15-pin with RS485, 0.61 to 10.23 V Range. Inficon Part Number: 3PC2-001-2400. The Inficon PCG 552 combination Pirani capacitance diaphragm gauge combines Pirani technology with a ceramic capacitance diaphragm sensor in a single product. This gauge has a nickel filament and a D-sub 15 pin HD connector with RS485 communication protocol. This Inficon gauge includes 2 setpoints and operates in the 5×10-5 to 1500 mbar (3.8×10-5 to 1125 Torr) range. The 552 gauge has a KF-16 flange to connect to the vacuum line and can be oriented in any position allowing system design flexibility. In the measurement range between 10 mbar and atmosphere the capacitance diaphragm technology provides gas-type independent, highly accurate and reliable pressure measurements and safe venting with any gas. This PCG552 Pirani capacitance diaphragm gauge works with Inficon vacuum gauge controller models VCG401, 402, 403, or with other suitable controllers. Connection cables (P104426, P104427) are available separately. For complete specifications and instructions, please see the available downloads.

Inficon Gauge Cable for SKY CDG Capacitance Diaphragm Gauge to Inficon VGC401-501, VGC402-502, VGC403-503, Vacuum Gauge Controller, 10 ft (3 Meters). Inficon Part Number: 398-540 This is a signal cable that connects the Inficon VGC401-501, VGC402-502, VGC403-503 to the SKY CDG Capacitance Diaphragm Gauges, Cable is 10 ft. (3 Meters).Connector Type FCC / D-sub 15 pin female. (This pricing is for the cable only, pumps, controllers, sensors sold separately.) Connects to the Following INFICON SKY® CDG (unheated) Capacitance Diaphragm Gauges: CDG025D, CDG025D-S CDG025D-X3 CDG045 CDG100D CDG160D, CDG200D All Ceramic™ CDG025-C AllCeramic™ CDG160A-C / CDG160A-CS

INFICON CDG, BAG, BPG, BCG, HPG Gauge Cable, to INFICON Vacuum Gauge Controller, 10 ft (3 Meters) PN 398-520.This is a signal cable that connects the INFICON VGC401-501, VGC402-502, VGC403-503 to the CDG, BAG, BPG, BCG, HPG gauges, Cable is 10 ft. (3 Meters). Connector Type D-Sub 15 pin Female / D-Sub 15 pin Male. (This pricing is for the cable only, pumps, controllers, sensors sold separately.)Connects to the Following INFICON SKY® CDG Capacitance Diaphragm Gauges: • CDG025D, CDG025D-S • CDG025D-X3 • CDG045 • CDG100D • CDG160D, CDG200D • All Ceramic™ CDG025-C • AllCeramic™ CDG160A-C / CDG160A-CS • Connects to the Following INFICON BAG, BPG Bayard-Alpert Pirani Gauges: • BPG400 • BPG402-S • Connects to the Following INFICON BCG Bayard-Alpert Pirani Capacitance Diaphragm Gauges: • TripleGauge® BCG450 • Connects to the Following INFICON HPG High Pressure Hot Ionization Pirani Gauges: • HPG400 •