Keyword Part Number:
EVAC Aluminum metal OUTER seal for converting elastomer (Viton/Buna) rubber seal NW16 KF16 to UHV (Ultra High Vacuum) Seal - PN NW-16-MS-A This EVAC Aluminum Metal OUTER Seal NW16 KF16 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF16 NW16 aluminum metal knife edge seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf below.
Condition: New
Part Number: P103400
Price: Kr415.86
EVAC Aluminum metal INNER seal for converting elastomer (Viton/Buna) rubber seal NW16 KF16 to UHV (Ultra High Vacuum) Seal - PN 34.016001.142.116-IZ This EVAC Aluminum Metal INNER Seal NW16 KF16 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. AN OUTER Seal can also be used. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge INNER seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF16 NW16 aluminum metal knife edge INNER seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf to the side.
Condition: New
Part Number: P1011415
Price: Kr431.53
EVAC Aluminum metal OUTER seal for converting elastomer (Viton/Buna) rubber seal NW25 KF25 to UHV (Ultra High Vacuum) Seal - PN NW-25-MS-A This EVAC Aluminum Metal OUTER Seal NW25 KF25 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF25 NW25 aluminum metal knife edge seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf below.
Condition: New
Part Number: P103401
Price: Kr1,160.46
EVAC Aluminum metal OUTER seal for converting elastomer (Viton/Buna) rubber seal NW40 KF40 to UHV (Ultra High Vacuum) Seal - PN NW-40-MS-A This EVAC Aluminum Metal OUTER Seal NW40 KF40 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF40 NW40 aluminum metal knife edge seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf below.
Condition: New
Part Number: P103402
Price: Kr731.98
EVAC Aluminum metal OUTER seal for converting elastomer (Viton/Buna) rubber seal NW50 KF50 to UHV (Ultra High Vacuum) Seal - PN NW-50-MS-A This EVAC Aluminum Metal OUTER Seal NW50 KF50 flange is for converting Elastomer (Viton/Buna) rubber seals to UHV (Ultra High Vacuum) aluminum metal seals. This allows for a lower vacuum compared to elastomer (Viton/Buna) rubber seals. Other benefits include: reduced outgassing, no permeation , no hydrocarbons, and resistance to radiation and higher heat. The resultant UHV seal has a helium leak rate of less than 1 X 10 -11 standard cc/sec. They can also be baked repeatedly to 150°C (302°F). The EVAC chain clamp and an aluminum knife edge seal form the UHV vacuum seal between the connecting KF flanges. (please see far right graphic above - click to enlarge). This EVAC metal seal is made of aluminum. This is a KF50 NW50 aluminum metal knife edge seal only, the stainless steel chain clamp IS NOT included but available on this website. For a complete explaination of this UHV Seal and dimensions of the aluminum metal knife edge seal, download the EVAC Flange Brochure .pdf below.
Condition: New
Part Number: P103403
Price: Kr671.81