Leybold PENNINGVAC PTR 90 Cold Cathode/Pirani with a Cold Cathode Ionization Sensor Gauge, KF-25, RJ45. PN: 230070 These Leybold PENNINGVAC Transmitter PTR 90 Sensor Gauges are designed for vacuum measurement in the pressure range of Atmosphere to 1x10-9 Torr (ATM to 5×10-9 mbar). The PENNINGVAC Transmitter PTR 90 Sensor Gauge can be operated in connection with an Leybold Vacuum gauge controller Display ONE, TWO or THREE or with GRAPHIX ONE, TWO or THREE Controllers. The Leybold PENNINGVAC Transmitter PTR-90 Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note: This Leybold PENNINGVAC Transmitter PTR-90 Sensor Gauge MUST NOT be used for measuring pressures of flammable or combustible gases. Please refer to the Technical Data sheet to the side for more information.

Leybold PENNINGVAC PTR 90 N Cold Cathode/Pirani with a Cold Cathode Ionization Sensor Gauge KF-25,15 pin Sub D Male (RS232). Leybold Part Number: 230088V02 These Leybold PENNINGVAC Transmitter PTR 90 N Sensor Gauges are designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). The PENNINGVAC Transmitter PTR 90 N Sensor Gauge can be operated in connection with an Leybold Vacuum gauge controller Display ONE, TWO or THREE or with GRAPHIX ONE, TWO or THREE Controllers. The Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note: This Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge MUST NOT be used for measuring pressures of flammable or combustible gases. Please refer to the Technical Data sheet to the side for more information.

Leybold PENNINGVAC PTR 90 N Cold Cathode/Pirani with a Cold Cathode Ionization Sensor Gauge, KF-25, RJ45. Leybold Part Number: 23L0021100 replaces the discontinued PN: 230070V02. These Leybold PENNINGVAC Transmitter PTR 90 N Sensor Gauges are designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). The PENNINGVAC Transmitter PTR 90 N Sensor Gauge can be operated in connection with an Leybold Vacuum gauge controller Display ONE, TWO or THREE or with GRAPHIX ONE, TWO or THREE Controllers. The Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note: This Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge MUST NOT be used for measuring pressures of flammable or combustible gases. Please refer to the Technical Data sheet to the side for more information.

NEW Leybold PENNINGVAC PTR 90 N Cold Cathode/Pirani with a Cold Cathode Ionization Sensor Gauge, KF-40 RJ45. PN: 230071V02 These Leybold PENNINGVAC Transmitter PTR 90 N Sensor Gauges are designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). The PENNINGVAC Transmitter PTR 90 N Sensor Gauge can be operated in connection with an Leybold Vacuum gauge controller Display ONE, TWO or THREE or with GRAPHIX ONE, TWO or THREE Controllers. The Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note: This Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge MUST NOT be used for measuring pressures of flammable or combustible gases. Please refer to the Technical Data sheet to the side for more information.

NEW Leybold PENNINGVAC PTR 90 N Cold Cathode/Pirani with a Cold Cathode Ionization Sensor Gauge, DN40 CF 2.75 in. RJ45 PN: 230072V02 These Leybold PENNINGVAC Transmitter PTR 90 N Sensor Gauges are designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). The PENNINGVAC Transmitter PTR 90 N Sensor Gauge can be operated in connection with an Leybold Vacuum gauge controller Display ONE, TWO or THREE or with GRAPHIX ONE, TWO or THREE Controllers. The Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note: This Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge MUST NOT be used for measuring pressures of flammable or combustible gases. Please refer to the Technical Data sheet to the side for more information.

Leybold Penningvac PTR 90 Cold Cathode/Pirani Gauge Mounting Tool for Ignition Aids. Leybold Part Number 240013. This is a Mounting tool to replace the Ignition Aids for the Penningvac PTR 90 Cold Cathode/Pirani gauges. We stock maintenance and repair kits for Penningvac gauges.

Leybold PENNINGVAC Baffle KF25 Centering Ring for PTR 90 N Gauge 230078 This Baffle is for protection of the sensor PTR 90 N against contamination, radiation and other disturbing factors. The installation of a baffle is recommended when using this PTR 90 N Gauge. They come in 2 sizes KF25 and KF40. The functions of the Leybold PENNINGVAC Transmitter PTR 90 N has been designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). It can be operated in connection with an Leybold Vacuum gauge controller CENTER ONE, CENTER TWO, CENTER THREE or with another controller. Over the whole measuring range, the measuring signal is output as a logarithm of the pressure. The Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note that this Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge MUST NOT be used for measuring flammable or combustible gases which react in air. This is a KF 25 Baffle Centering Ring ONLY, individual parts or systems sold separately.

Leybold PENNINGVAC Baffle KF40 Centering Ring for PTR 90 N Gauge 230079 This Baffle is for protection of the sensor PTR 90 N against contamination, radiation and other disturbing factors. The installation of a baffle is recommended when using this PTR 90 N Gauge. They come in 2 sizes KF25 and KF40. The functions of the Leybold PENNINGVAC Transmitter PTR 90 N has been designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). It can be operated in connection with an Leybold Vacuum gauge controller CENTER ONE, CENTER TWO, CENTER THREE or with another controller. Over the whole measuring range, the measuring signal is output as a logarithm of the pressure. The Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note that this Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge MUST NOT be used for measuring flammable or combustible gases which react in air. This is a KF 25 Baffle Centering Ring ONLY, individual parts or systems sold separately.

Leybold Maintenance Kit for Penningvac PTR 90 (Kit For Older PTR 90 Transmitter) Cold Cathode/Pirani Gauge. PN: 240011. This is a Maintenance Kit for the Leybold PENNINGVAC Transmitter PTR 90 Sensor Gauges. Includes FPM seals and new clips. We can also supply a more complete Repair kit (part number P109704) which includes a new Pirani element and complete anode should you require a more extensive sensor rebuild.

NEW Leybold Repair Kit for PENNINGVAC PTR 90 (Kit For Older PTR 90 Transmitter) Cold Cathode/Pirani Gauge. PN: 240010 This is a Repair Kit for the Leybold PENNINGVAC Transmitter PTR 90 Sensor Gauges. They are designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). The PENNINGVAC Transmitter PTR 90 Sensor Gauge can be operated in connection with an Leybold Vacuum gauge controller CENTER ONE, CENTER TWO, CENTER THREE or with another controller. Over the whole measuring range, the measuring signal is output as a logarithm of the pressure. The Leybold PENNINGVAC Transmitter PTR-90 Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note that this Leybold PENNINGVAC Transmitter PTR-90 Sensor Gauge MUST NOT be used for measuring flammable or combustible gases which react in air. Please refer to the Technical Data sheet (pdf) below for more information.

Leybold PENNINGVAC Replacement Anode Ring for PTR 90 N, PTR 225 N, 237 N Gauge 20028711V02 This is a replacement Anode Ring for the Penningvac PTR 90 N, PTR 22 5N and the PTR 127 N. The functions of the Leybold PENNINGVAC Transmitter PTR 90 N has been designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). It can be operated in connection with an Leybold Vacuum gauge controller CENTER ONE, CENTER TWO, CENTER THREE or with another controller. Over the whole measuring range, the measuring signal is output as a logarithm of the pressure. The Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note that this Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge MUST NOT be used for measuring flammable or combustible gases which react in air. This is a Anode Ring ONLY, individual parts or systems sold separately.

Leybold Connecting cable type A, RJ45 both sides for Leybold TTR and PTR gauges, and Leybold Graphix and Display Controllers, 5 meter. PN: 12426 The Leybold cable type A RJ45 both sides, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 5 meters (16.5 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

Leybold Connecting cable type A, RJ45 both ends for Leybold TTR and PTR gauges, and Leybold Graphix and Display Controllers, 10 meter. PN: 230012 The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 10 meters (33ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

Leybold Connecting cable type A, RJ45 both ends for Leybold TTR and PTR gauges, and Leybold Graphix and Display Controllers, 15 meter. PN: 12427 The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 15 meters (49 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

Leybold Connecting cable type A, RJ45 both ends for Leybold TTR and PTR gauges, and Leybold Graphix and Display Controllers, 20 meter. PN: 12428 The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 20 meters (65 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

Leybold Connecting cable type A, RJ45 both ends for Leybold TTR and PTR gauges, and Leybold Graphix and Display Controllers, 30 meter. PN: 12429 The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 30 meters (98 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

Leybold Cable to Connect the PTR 90 Cold Cathode/Pirani Sensor Gauge to TurboLab 80 Vacuum Pump Systems, 15 Foot Length. PN 230032V01 Leybold Cable to Connect the PTR 90 Cold Cathode/Pirani Sensor Gauge to TurboLab 80 Vacuum Pump Systems. 15 Foot Length. (This is the signal cable ONLY, PTR 90 Sensor Gauge and TurboLab 80 System sold separately.)

Leybold Connecting cable type A, RJ45 both ends for Leybold TTR and PTR gauges, and Leybold Graphix and Display Controllers, 50 meter. PN: 12431 The Leybold cable type A RJ45 both ends, connects the Leybold Graphix controllers (1,2,3) and Display Controllers (1,2,3) to the Leybold TTR or PTR pressure gauges. They are 50 meters (164 ft.) long. Note: This is the cable ONLY, gauges and controllers are sold separately.

PTR 90 (N) Kit For Leybold TURBOLAB 80 Vacuum System, ISO-63 Inlet to KF25 gauge fitting with PTR 90 N These PTR 90 gauge kits (with Leybold PENNINGVAC PTR 90 N Cold Cathode/Pirani with a Cold Cathode Ionization Sensor Gauge, KF-25) are designed to work with Leybold TURBOLAB 80 System. The functions of Leybold PENNINGVAC Transmitter PTR 90 N has been designed for vacuum measurement in the pressure range of 750 to 1x10-9 Torr (1000 to 5×10-9 mbar). It can be operated in connection with an Leybold Vacuum gauge controller CENTER ONE, CENTER TWO, CENTER THREE or with another controller. Over the whole measuring range, the measuring signal is output as a logarithm of the pressure. The Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge consists of two separate measurement systems (pirani and cold cathode system) the signals of which are combined in such a way that one measurement signal is output. Note that this Leybold PENNINGVAC Transmitter PTR-90 N Sensor Gauge MUST NOT be used for measuring flammable or combustible gases which react in air. This is a GAUGE KIT ONLY, individual parts or systems sold separately. Gauge Kit includes all the parts listed in the picture.