Ideal Vacuum Cube 9 x 9 Vacuum Chamber Blank Plate No Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch blank plate without ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This is the least expensive 9 x 9 Cube plate. It is often used for the bottom of Cubes, or any other Cube side where ports are not needed. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports No internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Blank Plate No Ports with Internal Optical Breadboard Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch blank plate without ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. It has an internal optical breadboard for mounting test items or fixtures. This is the least expensive 9 x 9 Cube plate with an internal optical breadboard. It is often used for the bottom of Cubes, or any other Cube side where ports are not needed, but the ability to fixture components inside the chamber is desired. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Blank plate without ports Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-25 (NW-25) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-25 bulkhead port\. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599).Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One KF-25 (NW-25) bulkhead port (uses KF-25 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-40 (NW-40) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-40 bulkhead port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One KF-40 (NW-40) bulkhead port (uses KF-40 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One KF-50 (NW-50) Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered KF-50 bulkhead port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-50 centering ring (P101245) and bulkhead clamp (P108104 or P104601).Features: 9 x 9 plate 6061-T6 aluminum 6061-T6 aluminum Uncoated for bakeout to 150°C One KF-50 (NW-50) bulkhead port (uses KF-50 bulkhead clamp and centering ring) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-16 (NW-16) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-16 bulkhead ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-16 centering ring (P101242) and bulkhead clamp (P108101 or P104598). Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Quad KF-16 (NW-16) bulkhead ports (uses KF-16 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-25 (NW-25) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-25 bulkhead ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-25 centering ring (P101243) and bulkhead clamp (P108102 or P104599).Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Quad KF-25 (NW-25) bulkhead ports (uses KF-25 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-40 (NW-40) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with four KF-40 bulkhead ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use a standard KF-40 centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C Quad KF-40 (NW-40) bulkhead ports (uses KF-40 bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With Four KF-40 (NW-40) Ports Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with five KF bulkhead ports, including one KF-40, two KF-25, and two KF-16 ports. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. SInce a bulkhead KF fitting does not have a flange, this type of connection cannot use a standard KF clamp. Bulkhead KF clamps are secured to the plate with screws. To attach a KF flanged component to the KF bulkhead fitting, use standard centering rings and bulkhead clamps. KF-16 uses centering ring (P101242) and bulkhead clamp (P104598 or P108101) KF-25 uses centering ring (P101243) and bulkhead clamp (P108102 or P104599) KF-40 uses centering ring (P101244) and bulkhead clamp (P108103 or P104600) Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C (1ea) KF-40, (2 ea) KF-25, and (2ea) KF-16 bulkhead ports (uses bulkhead clamps and centering rings) Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9" Cube frame only.

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 63 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one ISO-F 63 port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101766). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One ISO-F 63 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 80 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one ISO-F 80 port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101767). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One ISO-F 80 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 100 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one ISO-F 100 port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104063) and a centering ring with O-ring seal are needed. (P101768). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One ISO-F 100 port with 5/16-18 tapped mounting holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One ISO-F 160 Port Uncoated for Bakeout. This is an Ideal Vacuum Cube 9 x 9 inch plate with one ISO-F 160 port. The plate is machined from 6061-T6 aluminum and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. The ISO-F port has 5/16-18 tapped holes for mounting a turbo pump, or ISO flanged tubing. To mount an ISO-K flanged turbo pump or tubing, single claw clamps (P104065) and a centering ring with O-ring seal are needed. (P101769). Below, please download the Common Vacuum Fittings Selection and Assembly Guide for instructions about making leak-proof flanged connections. Also download the Cube Plate Installation Manual for making leak-proof Vacuum Cube plate seals. Features: 9 x 9 plate 6061-T6 aluminum Uncoated for bakeout to 150°C One ISO-F 160 port with 5/16-18 tapped mounting holes No internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 in. Gate Valve Adapter Plate Kit ISO-F 100. This is an ISO-F 100 gate valve adapter plate kit for the 9 x 9 Ideal Vacuum Cube. This adapter allows the compact connection of an ISO-F 100 gate valve (with tapped mounting holes) to an Ideal Vacuum Cube™, without additional plumbing or fittings. The adapter consists of two plates. One plate has our patented Taper-Seal™ O-ring seal and is mounted to the Cube frame. The other plate is mounted to the gate valve’s threaded flange. An ISO 100 centering ring with O-ring is sandwiched between the two plates which are then screwed together to make the seal. This adapter kit can be used to isolate a turbomolecular pump from the chamber. It creates the shortest possible pumping path for maximum high vacuum performance. Another use for the gate valve adapter kit is to join two Cubes together in load lock applications. Two adapter kits are required, one on each side of the gate valve. When two cubes are joined with a gate valve between them, one Cube can be used as an antechamber to transfer materials from ambient atmosphere into the other which remains under vacuum. Similarly, when two Cubes of differing sizes are joined with a gate valve between them, the system can be used for explosive decompression testing. Here, the larger Cube decompresses the smaller Cube. It is best to use a pneumatic gate valve since it opens more rapidly than a manually operated one. Please download the gate valve adapter kit user manual for installation instructions. Features: 9" x 9" plate size Uncoated 6061-T6 aluminum Connects ISO-F 100 gate valve to 9 x 9 Cube face Shortest possible pumping path for maximum performance No extra tubing or fittings needed Hardware included Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 2.75 in. Port Uncoated Stainless Steel for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 2.75" Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 1/4-28 UNF tapped holes for mounting a turbo pump or CF flanged tubing. This plate’s Conflat port requires six (6) 1/4-28 x 7/8" long, silver-plated, 12 point bolts (P104404). The CF ports are not compatible with metal gaskets. Use only Viton seals (P104341). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 304L stainless steel Uncoated for bakeout to 150°C One CF 2.75" Conflat port with 1/4-28 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 3.375 in. Port Uncoated Stainless Steel for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 3.375" Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104342). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 304L stainless steel Uncoated for bakeout to 150°C One CF 3.375" Conflat port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 4.5 in. Port Uncoated Stainless Steel for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 4.5" Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires eight (8) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012250). The CF port is not compatible with metal gaskets. Use only Viton seals (P104343). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 304L stainless steel Uncoated for bakeout to 150°C One CF 4.5" Conflat port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only

Ideal Vacuum Cube 9 x 9 Vacuum Chamber Plate With One Conflat CF 6.0 in. Port Uncoated Stainless Steel for Bakeout. NOT COMPATIBLE WITH COPPER GASKETS. USE ONLY WITH VITON CF GASKETS! This is an Ideal Vacuum Cube 9 x 9 inch plate with one centered CF 6.0" Conflat port. The plate is machined from 304L stainless steel and is uncoated for bakeout to 150°C, the limit of the Viton sealing O-ring. This Conflat CF ported plate has 5/16-24 UNF tapped holes for mounting a turbo pump or CF flanged tubing. The plate’s Conflat port requires This plate’s Conflat port requires sixteen (16) 5/16-24 x 1.0" long, silver-plated, 12 point bolts (P1012251). The CF port is not compatible with metal gaskets. Use only Viton seals (P104345). Cube baseline vacuum is 1 x 10-7 Torr. Features: 9 x 9 plate 304L stainless steel Uncoated for bakeout to 150°C One CF 6.0" Conflat port with 5/16-24 UNF tapped holes Internal optical breadboard Mounts in any orientation Directly mounts to 9 x 9 Cube frame only