SS Centering Ring Polymer Nitrile NW10/16 Adapter KF10 KF16 (Sold as ONE Each) Edwards PN C10512346This SS centering ring is manufactured with a high-tech polymer nitrile. These centering rings have a unique slotted design which prevents gas bursts. The CX2 polymer can be used at temperatures up to 120 °C and is unaffected by most common solvents. The material has an outgassing rate of 6.6 × 10-8 mbar l s-1cm-2 which makes it suitable for use in most vacuum systems, while giving additional benefits in terms of lower weight and cost.

Centering Ring Adaptive KF-10 to KF-16 Vacuum Fittings, ISO-KF Flange Size NW-10 to NW-16, Stainless Steel with Viton® O-ring.These KF-10 to KF-16 Centering Ring Adaptive vacuum fittings follow ISO-KF standards and have a flange size of NW-10 to NW-16. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel with Viton® O-Ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.KF-10 to KF-16 Centering Ring Adaptive with Viton® O-ringISO-KF Flange Size: NW-10 to NW-16These adaptive centering rings are for obsolete bore sizes.

Centering Ring Adaptive KF-10 to KF-16 Vacuum Fittings, ISO-KF Flange Size NW-10 to NW-16, Polymer with Viton® O-ring.These KF-10 to KF-16 Centering Ring Adaptive vacuum fittings follow ISO-KF standards and have a flange size of NW-10 to NW-16. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant polymer with Viton® O-Ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.KF-10 to KF-16 Polymer Centering Ring Adaptive with Viton® O-ringISO-KF Flange Size: NW-10 to NW-16These adaptive centering rings are for obsolete bore sizes.

Centering Ring Adaptive KF-20 to KF-25 Vacuum Fittings, ISO-KF Flange Size NW-20 to NW-25, Stainless Steel with Viton® O-ring.These KF-20 to KF-25 Centering Ring Adaptive vacuum fittings follow ISO-KF standards and have a flange size of NW-20 to NW-25. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel with Viton® O-Ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.KF-20 to KF-25 Centering Ring Adaptive with Viton® O-ringISO-KF Flange Size: NW-20 to NW-25These adaptive centering rings are for obsolete bore sizes.

Centering Ring Adaptive KF-32 to KF-40 Vacuum Fittings, ISO-KF Flange Size NW-32 to NW-40, Stainless Steel with Viton® O-ring.These KF-32 to KF-40 Centering Ring Adaptive vacuum fittings follow ISO-KF standards and have a flange size of NW-32 to NW-40. They are commonly used to build foreline vacuum plumbing and process systems. They are often called quick flange fittings because they are quick to assemble. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel with Viton® O-Ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.KF-32 to KF-40 Centering Ring Adaptive with Viton® O-RingISO-KF Flange Size: NW-32 to NW-40These adaptive centering rings are for obsolete bore sizes.

Polymer CoSeal Center Ring Adaptive, KF20 to KF25 Vacuum Fittings, ISO-KF Flange Size NW-20 to NW-25, Viton. These vacuum coseals for NW/KF20-25 flange fittings are made of a polymer-supported Viton O-ring.Coseals represent a major advance in the method of sealing NW and ISO flange connections. The seal design eliminates crevices and trapped gas volumes (there is nothing between the Viton vacuum seal and the gas media). When properly fitted, the inner face of the Coseal is directly exposed to the vacuum system, eliminating any crevices or trapped volumes, which can generate gas bursts and inhibit pump-down. Unlike the regular centering ring and O-ring, the NW Coseal is fully restrained externally. Coseals are available with either nitrile or fluoroelastomer (Viton) seals.